On fully-mechanized faces in nearly horizontal thin coal seams （NHTCS）, the selection of the auxiliary transportation mode is difficult. Generally, auxiliary transportation mainly includes trackless or rail transpor...On fully-mechanized faces in nearly horizontal thin coal seams （NHTCS）, the selection of the auxiliary transportation mode is difficult. Generally, auxiliary transportation mainly includes trackless or rail transportation. Combined with a familiar NHTCS fully-mechanized face, a multi-attribute decision- making model was set up for the decision. The index weight was objectively determined with the fuzzy number and entropy method. The priority order of auxiliary transportation modes was obtained from the Preference Ranking Organization Method for Enrichment Evaluation （PROMETHEE）. The results show that： the net flow of the mode can be expressed by the function of the surrounding rock deformation of the roadway, the dimension of equipment and the thickness of the coal seam; Based on the cost type index, there is a positive correlation between the net flow with the height and width of the trackless auxiliary transportation equipment, respectively. The trackless auxiliary transportation equipment selection principle should be ＂height first then width＂. Combined with the field application of the trackless auxil- iary transportation in Liangshuijing coal mine, the proper method to achieve the safe and high-efficient exploitation of a NHTCS fully-mechanized face is trackless tvred vehicle auxiliary transportation.展开更多
Recently, high heat density has become a problem in electronic devices. Therefore, high heat-transfer efficiency is required in copper heat exchangers. Improvement ofwettability is reported to improve the heat-transfe...Recently, high heat density has become a problem in electronic devices. Therefore, high heat-transfer efficiency is required in copper heat exchangers. Improvement ofwettability is reported to improve the heat-transfer efficiency. In previous studies, copper oxide layer improves the wettability. In this study, we focus on a copper oxide layer produced under warm conditions （from 200 to 300 ℃）, which are suitable oxidation conditions for improving wettability. Experimental results showed that the surface of the specimens was covered by the oxidation layer and took on a black color. Furthermore, the wettability was improved by the warm copper oxide layer. While, the surface roughness was approximately constant to each warm oxidized specimen. Whereat, the warm oxide layer was observed by SEM （sanning electron microscope）. The results from SEM observations showed that the warm copper oxide layer consisted of stacks and combinations of nanoscopic warm oxidation particles. Thus, the warm oxidation layer has nanoscopic surface asperities. It is seemed that these nanoscopic asperities improved the wettability.展开更多
Nanofluidics is a recent appearing research field, introduced in 1995 as an analogue of the field of microfluidics, and has been becoming popular in the past few years. The proximity of the channel dimension, the Deby...Nanofluidics is a recent appearing research field, introduced in 1995 as an analogue of the field of microfluidics, and has been becoming popular in the past few years. The proximity of the channel dimension, the Debye length, and the size of biomolecules such as DNA and proteins gives the unique features of nanofluidic devices. Of various unique properties of the nanofluidics, mass transport in nanochannel plays determining roles in fundamental reaches and practical applications of nanofluidic device. Thus, much work including numerical and experimental researches has been performed to investigate the mass transport behaviors in nanofluidic devices. This review summarizes the fabrication technologies for nanofluidic devices, the mass transport behaviors in nanochannel, and their applications in bioanalysis. The main focus will be laid on the effects of nanochannel size and surface charge on mass transport including electrokinetic transport of charged analytes, diffusion of electric neutral molecules, ionic current rectification, concentration polarization, nonlinear electrokinetic flow at the micro-nanofluidic interfaces.展开更多
基金the National High Technology Plan of China (No. 2012AA062101)the National Natural Science Foundation of China (No. 51374200)Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘On fully-mechanized faces in nearly horizontal thin coal seams （NHTCS）, the selection of the auxiliary transportation mode is difficult. Generally, auxiliary transportation mainly includes trackless or rail transportation. Combined with a familiar NHTCS fully-mechanized face, a multi-attribute decision- making model was set up for the decision. The index weight was objectively determined with the fuzzy number and entropy method. The priority order of auxiliary transportation modes was obtained from the Preference Ranking Organization Method for Enrichment Evaluation （PROMETHEE）. The results show that： the net flow of the mode can be expressed by the function of the surrounding rock deformation of the roadway, the dimension of equipment and the thickness of the coal seam; Based on the cost type index, there is a positive correlation between the net flow with the height and width of the trackless auxiliary transportation equipment, respectively. The trackless auxiliary transportation equipment selection principle should be ＂height first then width＂. Combined with the field application of the trackless auxil- iary transportation in Liangshuijing coal mine, the proper method to achieve the safe and high-efficient exploitation of a NHTCS fully-mechanized face is trackless tvred vehicle auxiliary transportation.
文摘Recently, high heat density has become a problem in electronic devices. Therefore, high heat-transfer efficiency is required in copper heat exchangers. Improvement ofwettability is reported to improve the heat-transfer efficiency. In previous studies, copper oxide layer improves the wettability. In this study, we focus on a copper oxide layer produced under warm conditions （from 200 to 300 ℃）, which are suitable oxidation conditions for improving wettability. Experimental results showed that the surface of the specimens was covered by the oxidation layer and took on a black color. Furthermore, the wettability was improved by the warm copper oxide layer. While, the surface roughness was approximately constant to each warm oxidized specimen. Whereat, the warm oxide layer was observed by SEM （sanning electron microscope）. The results from SEM observations showed that the warm copper oxide layer consisted of stacks and combinations of nanoscopic warm oxidation particles. Thus, the warm oxidation layer has nanoscopic surface asperities. It is seemed that these nanoscopic asperities improved the wettability.
基金supported by the National Basic Research Program (2012CB933804)the National Natural Science Foundation of China (20890020, 20975047, 21035002)+2 种基金the National Science Fund for Creative Research Groups (21121091)Specialized Research Fund for the Doctoral Program of Higher Fducation (200802840012)the Natural Science Foundation of Jiangsu Province (BK2010009)
文摘Nanofluidics is a recent appearing research field, introduced in 1995 as an analogue of the field of microfluidics, and has been becoming popular in the past few years. The proximity of the channel dimension, the Debye length, and the size of biomolecules such as DNA and proteins gives the unique features of nanofluidic devices. Of various unique properties of the nanofluidics, mass transport in nanochannel plays determining roles in fundamental reaches and practical applications of nanofluidic device. Thus, much work including numerical and experimental researches has been performed to investigate the mass transport behaviors in nanofluidic devices. This review summarizes the fabrication technologies for nanofluidic devices, the mass transport behaviors in nanochannel, and their applications in bioanalysis. The main focus will be laid on the effects of nanochannel size and surface charge on mass transport including electrokinetic transport of charged analytes, diffusion of electric neutral molecules, ionic current rectification, concentration polarization, nonlinear electrokinetic flow at the micro-nanofluidic interfaces.
