羌族服饰

羌族服饰是羌族文化的一个重要组成部分,由于居住地区的差异而演化出不相同的几十种风格。羌族村寨山青水秀、风景如画,羌族人民在这自然的熏陶下,充分发挥自己丰富的想象力,创作出不同类型和款式的挑、绣工艺服饰。 妇女服饰常用青布、蔚兰、深兰布缝制,盛装用红平绒、灯芯绒布缝制。服饰因地区不同,款式上略有差异。

由辫子群G_2的表示求解Yang-Baxter方程

本文给出了由辫子群求解Yang-Baxter方程的一般方法,并在此基础上由相应于G_2群的辫子群的表示,求出了YBE的解。

TR-ESR Investigation on Reaction of Vitamin C with Excited Triplet of 9,10-phenanthrenequinone in Reversed Micelle Solutions

Time-resolved electron spin resonance has been used to study quenching reactions between the antioxidant Vitamin C （VC） and the triplet excited states of 9,10-phenanthrenequinone （PAQ） in ethylene glycol-water （EG-H2O） homogeneous and inhomogeneous reversed micelle solutions. Reversed micelle solutions were used to be the models of physiological environment of biological cell and tissue. In PAQ/EG-H2O homogeneous solution, the excited triplet of PAQ （3PAQ＊） abstracts hydrogen atom from solvent EG. In PAQ/VC/EG-H2O solution, 3pAQ＊ abstracts hydrogen atom not only from solvent EG but also from VC. The quenching rate constant of 3pAQ＊ by VC is close to the diffusion-controlled value of 1.41 × 108 L/（mol.s）. In hexadecyltrimethylammonium bromide （CTAB）/EG-H2O and aerosol OT （AOT）/EG- H2O reversed micelle solutions, 3pAQ＊ and VC react around the water-oil interface of the reversed micelle. Exit of 3pAQ＊ from the lipid phase slows down the quenching reaction. For Triton X-100 （TX-100）/EG-H2O reversed micelle solution, PAQ and VC coexist inside the hydrophilic polyethylene glycol core, and the quenching rate constant of 3pAQ＊ by VC is larger than those in AOT/EG-H2O and CTAB/EG-H2O reversed micelle solutions, even a little larger than that in EG-H2O homogeneous solution. The strong emissive chemically induced dynamic electron polarization of As＇- resulted from the effective TM spin polarization transfer in hydrogen abstraction of 3pAQ＊ from VC.

抽油机吊绳扶正器的研制与应用

抽油机是油田采油常用设备,抽油机正常生产中,常因抽油机安装质量、交变载荷等因素影响,使抽油杆发生偏转,毛辫子与抽油机驴头相互作用、相互磨擦,造成毛辨子断脱,存在严重的安全隐患。为了有效防止毛辫子打扭,自动调整抽油过程中产生的扭力问题,研制了抽油机吊绳扶正器装置。

Comparative Investigation of Mo（CO）6 Adsorption on Clean and OxidiZed Si（111） Surfaces

Mo（CO）6 adsorption on the clean, oxygen-precovered and deeply oxidized Si（lll） surfaces was comparatively investigated by high-resolution electron energy loss spectroscopy. The downward vibrational frequency shift of the C-O stretching mode in adsorbed Mo（CO）6 illustrates that different interactions of adsorbed Mo（CO）6 occur on clean Si（111） and SiO2/Si（111） surfaces, weak on the former and strong on the latter. The strong interaction on SiO2/Si（111） might lead to the partial dissociation of Mo（CO）6, consequently the formation of molybdenum subcarbonyls. Therefore, employing Mo（CO）6 as the precursor, metallic molybdenum could be successfully deposited on the SiO2/Si（111） surface but not on the clean Si（111） surface. A portion of the deposited metallic molybdenum is transformed into the MoOa on the SiO2/Si（111） surface upon heating, and the evolved MoO3 finally desorbs from the substrate upon annealing at elevated temperatures.

UNDERSTANDING HREM IMAGES OF Al-Mn-Si ICOSAHEDRAL QUASICRYSTAL

提出了处理数字化图像的光滑算子。用它处理了Ａｌ－Ｍｎ－Ｓｉ二十面体准晶的高分辨电子显微图，处理后的图像展示了周期结构特征，由此建立了一个平面周期模型，其Ｆｏｕｒｉｅｒ变换图符合Ａｌ－Ｍｎ－Ｓｉ准晶相应的电子衍射图。

A spectrum measurement system for arc plasma with time and spatial indentification

Spectrum analysis of the plasma has over the years been growing both in methods and instrument, which makes it become a widely used non-contact detection method, without disturbing the arc plasma itself. With noticeable developments in the industry application of the method, a need for careful analysis of the plasma with both time and space identification is desirable. Therefore, a spectral measurement system is developed in this paper for diagnosing arc plasma with time and space identification. With a new hollow probe scanning method, the instrument can be used to provide information like energy distribution of plasma, temperature within the arc plasma, which are of great significance with the requirement of space identification. Furthermore, the system can also be used to capture the instant state of the arc plasma with the synchronic triggering system, which uses high speed photo and electrical signal as the time criterion. The industry applications prove that the system works well for online detection of the arc plasma.

关于“批评与自我批评”

一、新时期党内“批评与自我批评”开展不力的主要症状及其原因 批评与自我批评是我党进行积极思想斗争的重要武器,可是由于历史和现实中的种种原因,批评与自我批评曾几何时变成了“表扬与自我表扬”。正如邓小平同志10多年前就深刻指出的那样:“现在我们搞批评、自我批评很不容易,自我批评更不容易。……批评的方法要讲究,分寸要适当,不要搞围攻、搞运动。但是不做思想工作,不搞批评、自我批评一定不行。批评的武器不能丢。”(《邓小平文选1975—1982年》第345页)

Nano-Level Electron Beam Lithography

The JEOL JBX-5000LS is a vector type machine.The system hardware features an ion-pumped column,a LaB 6 electron emitter,25kV and 50kV accelerating voltage,and a turbo-pumped sample chamber.The resolution,stability,stitching and overlay of this system are evaluated.The system can write complex patterns at dimensions down to 30nm.The demonstrated overlay accuracy of this system is better than 40nm.

Analysis and Identification on Fault of Rub-Impact between Rotor and Stator

According to the background of the rub impact faults of aerial engines and industrial turbines, two kinds of test rigs, on the base of the dynamics model, are established to study the rub impact faults between rotor and stator with free supports. The orbit of the vibration of rotor displacement is respectively examined on the four impact conditions, which are the normal state with no impact, the early sharp impact statement, the semi sharp impact statement and the terminal blunt impact statement. The route to chaos, appearing with the early sharp impact, is observed for the first time. By analyzing the frequency domain characteristics of the experimental data on four impact conditions, it is testified that the appearance of the sub harmonic vibrations of the order 1/3 and 1/4 is the effective evidence to judge whether or not the blade has initial light rub impact. When there are only the harmonic vibrations of the order of 1/1 and 1/2, the blade stator rub impact faults have become very serious.

Investigation on Exciton Relaxation Kinetics of ZnCulnS/ZnSe/ZnS Quantum Dots by Time-Resolved Spectroscopy Techniques

The exciton relaxation kinetics of ZnCuInS/ZnSe/ZnS quantum dots （QDs） is investigated by time-resolved spectroscopy techniques in detail. Based on the rate distribution model, the wavelength-dependent emission dynamics shows that the intrinsic exciton, the exciton in the interface defect state and that in donor-acceptor pair state （DAPS） together participate in the photoluminescence process of QDs, and the whole emission process is mainly dependent on the DAPS emission. Transient absorption data show that the intrinsic exciton and the interface defect species maybe together appear after excitation and the intensity-dependent Auger recombination process also exists in QDs at high excitation intensity.

Multiple attenuation using λ–f domain high-resolution Radon transform

The parabolic Radon transform has been widely used in multiple attenuation. To further improve the accuracy and efficiency of the Radon transform, we developed the 2- fdomain high-resolution Radon transform based on the fast and modified parabolic Radon transform presented by Abbad. The introduction of a new variable 2 makes the transform operator frequency-independent. Thus, we need to calculate the transform operator and its inverse operator only once, which greatly improves the computational efficiency. Besides, because the primaries and multiples are distributed on straight lines with different slopes in the 2-fdomain, we can easily choose the filtering operator to suppress the multiples. At the same time, the proposed method offers the advantage of high-resolution Radon transform, which can greatly improve the precision of attenuating the multiples. Numerical experiments suggest that the multiples are well suppressed and the amplitude versus offset characteristics of the primaries are well maintained. Real data processing results further verify the effectiveness and feasibility of the method.

Research and application of spectral inversion technique in frequency domain to improve resolution of converted PS-wave

Multi-wave exploration is an effective means for improving precision in the exploration and development of complex oil and gas reservoirs that are dense and have low permeability. However, convened wave data is characterized by a low signal-to-noise ratio and low resolution, because the conventional deconvolution technology is easily affected by the frequency range limits, and there is limited scope for improving its resolution. The spectral inversion techniques is used to identify λ/8 thin layers and its breakthrough regarding band range limits has greatly improved the seismic resolution. The difficulty associated with this technology is how to use the stable inversion algorithm to obtain a high-precision reflection coefficient, and then to use this reflection coefficient to reconstruct broadband data for processing. In this paper, we focus on how to improve the vertical resolution of the converted PS-wave for multi-wave data processing. Based on previous research, we propose a least squares inversion algorithm with a total variation constraint, in which we uses the total variance as a priori information to solve under-determined problems, thereby improving the accuracy and stability of the inversion. Here, we simulate the Gaussian fitting amplitude spectrum to obtain broadband wavelet data, which we then process to obtain a higher resolution converted wave. We successfully apply the proposed inversion technology in the processing of high-resolution data from the Penglai region to obtain higher resolution convened wave data, which we then verify in a theoretical test. Improving the resolution of converted PS-wave data will provide more accurate data for subsequent velocity inversion and the extraction of reservoir reflection information.

Short Term Load Forecasting Using Subset Threshold Auto Regressive Model

The subset threshold auto regressive (SSTAR) model, which is capable of reproducing the limit cycle behavior of nonlinear time series, is introduced. The algorithm for fitting the sampled data with SSTAR model is proposed and applied to model and forecast power load. Numerical example verifies that desirable accuracy of short term load forecasting can be achieved by using the SSTAR model.

Characterization of the Excited State on Methanol/Ti02（110） Interface

The electronic structure of methanol/TiO2（ll0） interface has been studied by photoemis- sion spectroscopy. The pronounced resonance which appears at 5.5 eV above the Fermi level in two-photon photoemission spectroscopy （2PPE） is associated with the photocatalyzed dissociation of methanol at fivefold coordinated Ti sites （Ti5c） on TiO2 （110） surface [Chem- ical Science 1, 575 （2010）]. To check whether this resonance signal arises from initial or intermediate states, photon energy dependent 2PPE and comparison between one-photon photoemission spectroscopy and 2PPE have been performed. Both results consistently sug- gest the resonance signal originates from the initially unoccupied intermediate states, i.e., excited states. Dispersion measurements suggest the excited state is localized. Time-resolved studies show the lifetime of the excited state is 24 fs. This work presents comprehensive char- acterization of the excited states on methanol/TiO2（110） interface, and provides elaborate experimental data for the development of theoretical methods in reproducing the excited states on TiO2 surfaces and interfaces.

Phase structure of ZK60-1Er magnesium alloy compressed at 450℃

The phase structure of ZK60-1Er magnesium alloy thermally compressed at the temperature of 450℃ and the strain rate of 1×10 -4 s -1 was determined by transmission electron microscopy(TEM)and high-resolution electron microscopy(HREM).The results show that this magnesium alloy contains many new W phases(Mg3Zn3Er2,FCC structure)in the matrix.Those new W phases have two morphologies,either irregularly rectangular or rod morphology·Lattice constants of the two new W phases are slightly higher than those of W Phase(Mg3Zn3Y2)containing rare earth element of yttrium.

Historical Development in Soil Micromorphological Imaging

The book ＂micropedolog＂ by Kubieana and a large number of publications has induced many people to practice soil micromorphology. Quantification of the soil fabric and its components was a major challenge. The use of the image analyses in soil science was a breakthrough. Attempts to make soil thin sections go back to the beginning of the 2oth century. Microscopic techniques and recently high resolution electron microscope and use of computer assisted imaging techniques enabled the in vitro study of soils in three dimensional levels. It is now possible to store and process massive amounts of data. Micro- morphological concepts and techniques are applied in paleopedological, ecological, and archaeological studies. The aim of this work was to examine soil micromorphological imaging in historical perspective.

Accuracy Comparison of Gridded Historical Cultivated Land Data in Jiangsu and Anhui Provinces

The spatial resolution of source data, the impact factor selection on the grid model and the size of the grid might be the main limitations of global land datasets applied on a regional scale. Quantitative studies of the impacts of rasterization on data accuracy can help improve data resolution and regional data accuracy. Through a case study of cropland data for Jiangsu and Anhui provinces in China, this research compared data accuracy with different data sources, rasterization methods, and grid sizes. First, we investigated the influence of different data sources on gridded data accuracy. The temporal trends of the History Database of the Global Environment （HYDE）, Chinese Historical Cropland Data （CHCD）, and Suwan Cropland Data （SWCD） datasets were more similar. However, differ- ent spatial resolutions of cropland source data in the CHCD and SWCD datasets revealed an average difference of 16.61% when provin- cial and county data were downscaled to a 10 x 10 km2 grid for comparison. Second, the influence of selection of the potential arable land reclamation rate and temperature factors, as well as the different processing methods for water factors, on accuracy of gridded datasets was investigated. Applying the reclamation rate of potential cropland to grid-processing increased the diversity of spatial distri- bution but resulted in only a slightly greater standard deviation, which increased by 4.05. Temperature factors only produced relative disparities within 10% and absolute disparities within 2 km2 over more than 90% of grid cells. For the different processing methods for water factors, the HYDE dataset distributed 70% more cropland in grid cells along riverbanks, at the abandoned Yellow River Estuary （located in Binhai County, Yancheng City, Jiangsu Province）, and around Hongze Lake, than did the SWCD dataset. Finally, we ex- plored the influence of different grid sizes. Absolute accuracy disparities by unit area for the year 2000 were within 0.1 km2 at a 1 km2 grid size, a 25% improvement over the 10 km2 grid size. Compared to the outcomes of other similar studies, this demonstrates that some model hypotheses and grid-processing methods in international land datasets are truly incongruent with actual land reclamation proc- esses, at least in China. Combining the model-based methods with historical empirical data may be a better way to improve the accuracy of regional scale datasets. Exploring methods for the above aspects improved the accuracy of historical crop/and gridded datasets for finer regional scales.

A Simple,Compact and Rigid Scanning Tunneling Microscope

We present a homebuilt scanning tunneling microscope(STM)which employs an inner-wall polished sapphire guiding tube as a rail for the scanner to form a short tip-sample mechanical loop.The scanner is mounted on a square rod which is housed in the guiding tube and held by a spring strip.The stiff sapphire guiding tube allows the STM body to be made in a simple,compact and rigid form.Also the material of sapphire improves the thermal stability of the STM for its good thermal conductivity.To demonstrate the performance of the STM,high quality atomic-resolution STM images of high oriented pyrolytic graphite were given.

Catalytic graphitization of Mo-B-doped polyacrylonitrile(PAN)-based carbon fibers

A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbon fibers in a uniformly dispersed Mo-B sol.The as-treated carbon fibers were then graphitized at 2 400 ℃ for 2 h.The structural changes were characterized by X-ray diffractometry(XRD),Raman spectroscopy,scanning electron microscopy(SEM) and high-resolution transmission electronic microscopy(HRTEM).The results show that much better graphitization can be achieved in the presence of Mo-B,with an interlayer spacing(d002) of 0.335 8 nm and a crystalline size(Lc) of 28 nm.