优势学科处于何种地位?

优势学科之所以能在一定时间范围内居于领先地位,是因为它一方面同国计民生息息相关,能够发挥巨大的经济效益;另一方面它所建立起来的理论体系,不仅直接指导本学科的发展,而且在相邻学科及相近学科中也能通过同步、类比等方法而发挥其指导作用。概要地说,优势学科对于发展国民经济是有力的“拳头”;对于探索科学奥秘,

利用IOCOMM创建园区网

随着Internet的日益普及和发展,许多学校和工厂都相继建立了自己的校园网或厂区网。这样一方面可以通过建立自己的主页,将学校或工厂的一些服务、新闻等放在Internet主页上向外宣传,供外界人士查询和浏览;另一方面也可方便园区内的学生或职工上网访问Internet,满足教学和科研的需求。 为了建立一个自己的主页,用户通常需要在本地配备一台主服务器。

An Iterative Decoding Scheme for Davey-MacKay Construction

In the Davey-MacKay(DM) construction,the inner decoder treats unknown transmitted bits as random independent substitution errors. It limits the synchronization capability of the inner decoder, and thus weakens the error-correcting capability of the DM construction.In order to improve the performance of the DM construction, an iterative decoding scheme is proposed, which iteratively utilizes the more accurate estimates of transmitted codewords. In the proposed scheme, the estimated average bit error rates and the estimated low-density parity-check(LDPC) codewords from the outer decoder are fed back into the inner decoder to update the synchronization process. Simulation results show that the proposed iterative decoding scheme significantly outperforms the traditional DM construction.

Cascaded Simultaneous Nitrification and Denitrification Process for Nitrogen and Phosphorus Reduction from RO Reject Wastewater： A Bench-Scale Study

The use of the reverse osmosis （RO） process, for refining secondary or tertiary effluent from plants treating domestic wastewater, is rapidly increasing. However, the disposal of the RO reject water poses a problem due to the presence of very high concentrations of salts, metals, and nutrients in it. This paper contains results of a bench-scale study aimed at reducing nutrients from RO-discarded streams utilizing a sequential bioreactors system, under partial aerobic and anoxic conditions. The tests were performed on synthetic wastewater resembling RO-reject water of an operating treatment plant, with glucose, methanol or acetate added to the water as sources of carbon. Study results indicate that the RO process removed about 50-60% of the total nitrogen and 50% of the phosphate; it reduced chemical oxygen demand （COD） by 79 to 82%, and affected no change in the metal concentrations. A clear cut removal preference for any one of the external carbon sources was not observed, although a slight advantage of glucose and methanol was recorded. The process maintained about 20% of the rector volume in the anoxic environment.

Modified Projective Synchronization of a New Hyperchaotic System via Nonlinear Control

In this paper, a nonlinear control scheme of two identical hyperchaotic Chert systems is developed to realize their modified projective synchronization. We achieve modified projective synchronization between the two identical hyperchaotic systems by directing the scaling factor onto the desired value. With symbolic computation system Maple and Lyapunov stability theory, numerical simulations are given to perform the process of the synchronization.

Coherent-Synchronized Oxidation of 4-Ethylpyridine and Piperidine by Hydrogen Peroxide

The regions of the selective oxidation of the the production of 4-vinylpyridine, 4-vinylpyridine coherent-synchronized mechanism is suggested for 4-ethylpyridine and piperidine. The HO^＊2 radical plays 4-ethylpyridine and piperidine have been found, and the optimal conditions for N-monoxide and pyridine have been determined. The most probable hydrogen peroxide decomposition and the free-radical chain oxidation of the key role in this mechanism.

Load Torque Compensator for Model Predictive Direct Current Control in High Power PMSM Drive Systems

The widely used cascade speed and torque controllers have a limited control performance in most high power applications due to the low switching frequency of power electronic converters and the convenience to avoid speed overshoots and oscillations for lifetime considerations. Model Predictive Direct Current Control （MPDCC） leads to an increase of torque control performance taking into account the discrete nature of inverters but temporary offsets and poor responses to load torque variations are still issues in speed control. A load torque estimator is proposed in this paper in order to further improve dynamic behavior. It compensates the load torque influence on the speed control setting a feed forward torque reference value. The benefits are twice; the speed controller reaches the speed reference value without offsets which would need to be compensated by an integrator and a better response to load torque variations is obtained since they are detected and compensated leading to small speed variations. Moreover, the influence of pararneter errors and disturbances has been analyzed and limited so that they play a minor role in operation.

On the non-synchronous rotation of binary systems

During the evolution of the binary system, many physical processes occur, which can influence the orbital angular velocity and the spin angular velocities of the two components, and influence the non-synchronous or synchronous rotation of the system. These processes include the transfer of masses and angular momentums between the component stars, the loss of mass and angular momentum via stellar winds, and the deformation of the structure of component stars. A study of these processes indicates that they are closely related to the combined effects of tide and rotation. This means, to study the synchronous or non-synchronous rotation of binary systems, one has to consider the contributions of different physical processes simultaneously, instead of the tidal effect alone. A way to know whether the rotation of a binary system is synchronous or non-synchronous is to calculate the orbital angular velocity and the spin angular velocities of the component stars. If all of these angular velocities are equal, the rotation of the system is synchronous. If not, the rotation of the system is non-synchronous. For this aim, a series of equations are developed to calculate the orbital and spin angular velocities. The evolutionary calculation of a binary system with masses of 10M~ ＋ 6Me shows that the transfer of masses and angular momentums between the two components, and the deformation of the components structure in the semidetached or in the contact phase can change the rotation of the system from synchronous into non-synchronous rotation.

Investigation on very large scale motions(VLSMs) and their influence in a dust storm

Based on the real-time synchronous measurements of the wind velocity,temperature,the PM10 concentration at 16 m and 47 m during a dust storm event,in which Reynolds number Re exceeds 6×106,this study reveals the existence of the very large scale motions(VLSMs) during the stable stage both in the stream velocity and the temperature field at the two heights,whose streamwise scales reach up to 10 times the thickness of the boundary layer.The streamwise velocity and the PM10 concentration display a similar frequency corresponding to the peaks of their energy spectra,which implies that the VLSMs of streamwise flow have a significant role in dust transportation.In contrast,the salient deviations of the PM10 concentration at 47 m from the Gaussian distribution are revealed,which means that 47 m is not in the dust transportation layer,but is a region where the dust transportation layer and the outer flow intersect each other.Analysis demonstrates that the energy spectra of the PM10 concentrations at 16 m and 47 m display the "-1" scaling law feature,which has the same frequency range(0.001-0.1 Hz) as that of the wind velocity.This provides a new paradigm for the existence of the self-similarity scaling region in turbulent flow.

An in-situ Technique for Producing Low-Cost Agricultural Biochar

Application of biochar to agricultural soils is effective to sequester atmospheric carbon and improve soil quality, but current pyrolysis and transportation costs are high, making biochar too costly to be used at the field scale. This study developed a new in-situ technique, burning and soil covering(B-SC), which can be used by farmers for production of biochar with crop residue. In this study,the air-dried feedstocks, elephant grass and corn residue, were burnt in situ for biochar production in the field. After approximately 90% of the leaves were combusted, the burning process was dramatically slowed down by covering the feedstock with soil. The biochar yield averaged 18.0 ± 1.3(n = 15) and 13.7 ± 1.3(n = 10) kg per 100 kg air-dried feedstock for the elephant grass and corn residue,respectively. The biochar properties were suitable for soil improvement. The inputs for biochar production of the B-SC process only included low labor force, open field, feedstock(e.g., grass and crop residue), and simple tools. The operation time for processing 10 kg of the corn residue by an individual farmer was 24.4 ± 4.1 min(n = 10). As compared with the conventional field burning process, the B-SC process drastically shortened the time for biomass burning and generated a significantly lower emission of smoke and thermal energy. This simple technique can be particularly practical and effective for farmers to improve the soils of poor quality in China.

Equation of state of CAS phase to pressure of the uppermost lower mantle at ambient temperature

The CAS phase is a major constituent phase for the continental crust and basaltic compositions at the P-T conditions of the Earth＇s mantle, and potentially plays an important role in the geodynamic processes related to slab subduction. Its equation of state has been investigated here at ambient temperature up to about 25 GPa by using a diamond-anvil cell and synchrotron Xray radiation. Its P-V data, fitted to the third-order Birch-Murnaghan equation, yield an isothermal bulk modulus （KT） of 185 （9） GPa and first pressure derivative （ KT^t ） of 7.2 （12）. If KT^t is fixed at 4, file derived Kr is 212 （4） GPa. Additionally, the CAS phase is strongly elastically anisotropic, with its a-axis direction much less compressible than c-axis direction： Kr-a ： Kr-c = 2.19.

Effects of Quantum Noise on Quantum Clock Synchronization

In laboratory environment, the channel apparatus will generate particular dominant quantum noise. The noise then will give rise to some errors during synchronization. In this work, the accuracies of one qubit transport protocol and entangled states transport protocol in the presence of noise have been studied. With the help of three important and familiar noise models, the quantum noise will degrade the accuracy has been proved. Due to the influence of quantum noise, the accuracy of entangled qubits decrease faster than that of one qubit. The entangled states will improve the accuracy in noise-free channel, and will degrade the accuracy in noise channel.