The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstruct...The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstructure of a single layer ceramic filter candle during filtration-cleaning cycle was observed by scanning electron microscope(SEM) and the resistance property of the filter was monitored accordingly.The experimental results show that there exists a serious dust deposit within the filter medium,especially at the surface region.This should be responsible for the decrease of the filter permeability.The deposit law of dust in the filter medium during filtration-cleaning cycle was then studied by measuring the deposit depth,the deposit amount,the particles distribution within the medium,the size distribution of deposited particles,and so on.Particles migration and fine particles penetration were found to be the main reasons,for which dust deposit within the filter medium became aggravated with cycle number.Based on a differential form of Ergun equation,an expression for the pressure drop of a used ceramic filter was developed with a good agreement with experimental results.Then,the effect of dust deposit on the residual pressure drop was studied at the different face velocities and dust sizes.It was found that face velocity and dust size significantly influence dust deposit within filter medium,and then the operation performance of the filter.展开更多
Filtration of aerosol particles using non-woven fibrous media is a common practice for air cleaning. It has found wide applications in industries and our daily lives. This paper overviews some of these applications an...Filtration of aerosol particles using non-woven fibrous media is a common practice for air cleaning. It has found wide applications in industries and our daily lives. This paper overviews some of these applications and provides an industrial perspective. It starts from discussing aerosol filtration theory, followed by a brief review on the advancement of filtration media. After that, filtration applications in respiratory protection, dust collection, and engine in-take air cleaning are elaborated. These are the areas that the author sees as the typical needed ones in China's fast pace economical development endeavor, where air filtration enables the protection of human health, environment and equipment for sustainability.展开更多
Alumina （MMAD： 32.45μm） was used to study dust cake formation in fiber filter at steady-state operation. Cake vertical profile along filter medium versus filtration velocity （ranging from 3 to 7cm/s）, particle c...Alumina （MMAD： 32.45μm） was used to study dust cake formation in fiber filter at steady-state operation. Cake vertical profile along filter medium versus filtration velocity （ranging from 3 to 7cm/s）, particle concentration （ranging from 40 to 120g/m^3） and particle areal mass to filter （ranging from 0.57 to 2.86 kg/m^2）, was researched by experiments and modeling. The filtration was carried through by a plane filter media （Material： Terylene felt, Thickness： 1.8mm） covered on a framework which was fixed in a filter. During filtration, the cake thickness was measured up and down by a mobile microscope and a camera controlled by a PC. The results showed that the cake vertical profile accord with a peak function. The peak amplitude A, center displacement xc, the shape parameters W of the peak function was greatly depended on filtration velocity and particle areal mass to filter, whereas slightly on particle concentration. The relationships between the three coefficients （peak amplitude A, center displacement xc, the shape parameters W） and filtration velocity, areal mass to filter, particle concentration were associated as equations, based on which pressure drop model was deduced. The peak function and pressure drop model were verified with experimental data.展开更多
基金Supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (20040425007)
文摘The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstructure of a single layer ceramic filter candle during filtration-cleaning cycle was observed by scanning electron microscope(SEM) and the resistance property of the filter was monitored accordingly.The experimental results show that there exists a serious dust deposit within the filter medium,especially at the surface region.This should be responsible for the decrease of the filter permeability.The deposit law of dust in the filter medium during filtration-cleaning cycle was then studied by measuring the deposit depth,the deposit amount,the particles distribution within the medium,the size distribution of deposited particles,and so on.Particles migration and fine particles penetration were found to be the main reasons,for which dust deposit within the filter medium became aggravated with cycle number.Based on a differential form of Ergun equation,an expression for the pressure drop of a used ceramic filter was developed with a good agreement with experimental results.Then,the effect of dust deposit on the residual pressure drop was studied at the different face velocities and dust sizes.It was found that face velocity and dust size significantly influence dust deposit within filter medium,and then the operation performance of the filter.
文摘Filtration of aerosol particles using non-woven fibrous media is a common practice for air cleaning. It has found wide applications in industries and our daily lives. This paper overviews some of these applications and provides an industrial perspective. It starts from discussing aerosol filtration theory, followed by a brief review on the advancement of filtration media. After that, filtration applications in respiratory protection, dust collection, and engine in-take air cleaning are elaborated. These are the areas that the author sees as the typical needed ones in China's fast pace economical development endeavor, where air filtration enables the protection of human health, environment and equipment for sustainability.
文摘Alumina （MMAD： 32.45μm） was used to study dust cake formation in fiber filter at steady-state operation. Cake vertical profile along filter medium versus filtration velocity （ranging from 3 to 7cm/s）, particle concentration （ranging from 40 to 120g/m^3） and particle areal mass to filter （ranging from 0.57 to 2.86 kg/m^2）, was researched by experiments and modeling. The filtration was carried through by a plane filter media （Material： Terylene felt, Thickness： 1.8mm） covered on a framework which was fixed in a filter. During filtration, the cake thickness was measured up and down by a mobile microscope and a camera controlled by a PC. The results showed that the cake vertical profile accord with a peak function. The peak amplitude A, center displacement xc, the shape parameters W of the peak function was greatly depended on filtration velocity and particle areal mass to filter, whereas slightly on particle concentration. The relationships between the three coefficients （peak amplitude A, center displacement xc, the shape parameters W） and filtration velocity, areal mass to filter, particle concentration were associated as equations, based on which pressure drop model was deduced. The peak function and pressure drop model were verified with experimental data.
