A numerical model of foundry filling process was established based on the smoothed particle hydrodynamics（SPH）method.To mimic the constraints that the solid mold prescribes on the filling fluid,a composite treatment...A numerical model of foundry filling process was established based on the smoothed particle hydrodynamics（SPH）method.To mimic the constraints that the solid mold prescribes on the filling fluid,a composite treatment to the solid boundaries is elaborately designed.On solid boundary surfaces,boundary particles were set,which exert Lennard-Jones force on approaching fluid particles;inside the solid mold,ghost particles were arranged to complete the compact domain of near-boundary fluid particles.Water analog experiments were conducted in parallel with the model simulations.Very good agreement between experimental and simulation results demonstrates the success of model development.展开更多
The heterogeneous multilayer interface of VN/Ag coatings and transition multilayer interface of VN/Ag coatings were prepared on Inconel 781 and Si(100),and the microstructures,mechanical and tribological properties we...The heterogeneous multilayer interface of VN/Ag coatings and transition multilayer interface of VN/Ag coatings were prepared on Inconel 781 and Si(100),and the microstructures,mechanical and tribological properties were investigated from 25 to 700℃.The results showed that the surface roughness and average grain size of VN/Ag coatings with transition multilayer interface are obviously larger than those of VN/Ag coatings with heterogeneous multilayer interface.The coatings with transition multilayer interface have higher adhesion force and hardness than the coatings with heterogeneous multilayer interface,and both coatings can effectively restrict the initiation and propagation of microcracks.Both coatings have excellent self-adaptive lubricating properties with a decrease of friction coefficient as the temperature increases,but their wear rates reveal a drastic increase.The phase composition of the worn area of both coatings was investigated,which indicates that a smooth Ag,Magnéli phase(V2O5)and bimetallic oxides(Ag3VO4 and AgVO3)can be responsible to the excellent lubricity of both coatings.To sum up,the coatings with transition multilayer interface have excellent adaptive lubricating properties and can properly control the diffusion rate and release rate of the lubricating phase,indicating that they have great potential in solving the problem of friction and wear of mechanical parts.展开更多
This paper focuses on the mechanism of interfacial mass transfer of a single bubble, based on the chemical potential driving force, an approach for calculating interfacial concentration in practical process is propose...This paper focuses on the mechanism of interfacial mass transfer of a single bubble, based on the chemical potential driving force, an approach for calculating interfacial concentration in practical process is proposed. The absorption processes of bubble under both quiescent and mobile conditions are analyzed and discussed respectively. For a stationary absorption, only in the case of liquid bulk concentration near saturated value, the interfacial concentration could close to the equilibrium value ; For a moving bubble, under ordinary operating condition （Yo〉l）, the interfacial concentration is far from its equilibrium. Only under bulk concentration near saturated value or a smaller Yo（Yo〈0.1） which may involve the complication of additional resistance at interface induced by surface contamination or surfactant added, the interfacial concentration could be approximate to equilibrium value. The interfacial concentration close to the interface on liquid side for a single CO2 bubble absorbed by methanol is measured using a modern optical instrumentation in which the laser holographic interference method is adopted with a real-time and amplification technique. Experimental results show that the interfacial concentration decreases significantly with increasing Re and is far from the equilibrium one in a larger Re range. Experiments validate the proposed model.展开更多
基金Project(2011006B)supported by the Open Project of National Engineering Research Center of Near-Shape Forming for Metallic Materials,ChinaProject(FJ)supported by the CAS"100 talents"Plan
文摘A numerical model of foundry filling process was established based on the smoothed particle hydrodynamics（SPH）method.To mimic the constraints that the solid mold prescribes on the filling fluid,a composite treatment to the solid boundaries is elaborately designed.On solid boundary surfaces,boundary particles were set,which exert Lennard-Jones force on approaching fluid particles;inside the solid mold,ghost particles were arranged to complete the compact domain of near-boundary fluid particles.Water analog experiments were conducted in parallel with the model simulations.Very good agreement between experimental and simulation results demonstrates the success of model development.
基金Project(51505100)supported by the National Natural Science Foundation of China
文摘The heterogeneous multilayer interface of VN/Ag coatings and transition multilayer interface of VN/Ag coatings were prepared on Inconel 781 and Si(100),and the microstructures,mechanical and tribological properties were investigated from 25 to 700℃.The results showed that the surface roughness and average grain size of VN/Ag coatings with transition multilayer interface are obviously larger than those of VN/Ag coatings with heterogeneous multilayer interface.The coatings with transition multilayer interface have higher adhesion force and hardness than the coatings with heterogeneous multilayer interface,and both coatings can effectively restrict the initiation and propagation of microcracks.Both coatings have excellent self-adaptive lubricating properties with a decrease of friction coefficient as the temperature increases,but their wear rates reveal a drastic increase.The phase composition of the worn area of both coatings was investigated,which indicates that a smooth Ag,Magnéli phase(V2O5)and bimetallic oxides(Ag3VO4 and AgVO3)can be responsible to the excellent lubricity of both coatings.To sum up,the coatings with transition multilayer interface have excellent adaptive lubricating properties and can properly control the diffusion rate and release rate of the lubricating phase,indicating that they have great potential in solving the problem of friction and wear of mechanical parts.
基金Supported by the National Natural Science Foundation of China(No. 20176036).
文摘This paper focuses on the mechanism of interfacial mass transfer of a single bubble, based on the chemical potential driving force, an approach for calculating interfacial concentration in practical process is proposed. The absorption processes of bubble under both quiescent and mobile conditions are analyzed and discussed respectively. For a stationary absorption, only in the case of liquid bulk concentration near saturated value, the interfacial concentration could close to the equilibrium value ; For a moving bubble, under ordinary operating condition （Yo〉l）, the interfacial concentration is far from its equilibrium. Only under bulk concentration near saturated value or a smaller Yo（Yo〈0.1） which may involve the complication of additional resistance at interface induced by surface contamination or surfactant added, the interfacial concentration could be approximate to equilibrium value. The interfacial concentration close to the interface on liquid side for a single CO2 bubble absorbed by methanol is measured using a modern optical instrumentation in which the laser holographic interference method is adopted with a real-time and amplification technique. Experimental results show that the interfacial concentration decreases significantly with increasing Re and is far from the equilibrium one in a larger Re range. Experiments validate the proposed model.
