电化学法生产过硫酸盐的添加剂

在电化学法生产过硫酸盐的过程中,添加剂是电解液的必要成分之一。其对阳极过程的影响以及促使电流效率的提高方面,国内外已有不少研究报道。早在十九世纪末,就已经发现氯离子对S_2O_3^(2-)阳极形成的电流效率的影响,随后又试验了F^-、SCN^-及一些高分子量的有机酸和硫脲的影响,结果表明这些物质能使氧的过电位升高,从而提高S_2O_3^(2-)形成的电流效率。

Recent Advances in Transition Metal-Based Catalysts for Electrocatalytic Nitrate Reduction Reaction

The accumulation of excessive nitrate in the atmosphere not only jeopardizes human health but also disrupts the balance of the nitrogen cycle in the ecosystem.Among various nitrate removal technologies,electrocatalytic nitrate reduction reaction(eNO_(3)RR)has been widely studied for its advantages of being eco-friendly,easy to operate,and controllable under environmental conditions with renewable energy as the driving force.Transition metal-based catalysts(TMCs)have been widely used in electrocatalysis due to their abundant reserves,low costs,easy-to-regulate electronic structure and considerable electrochemical activity.In addition,TMCs have been extensively studied in terms of the kinetics of the nitrate reduction reaction,the moderate adsorption energy of nitrogen-containing species and the active hydrogen supply capacity.Based on this,this review firstly discusses the mechanism as well as analyzes the two main reduction products(N_(2)and NH_(3))of eNO_(3)RR,and reveals the basic guidelines for the design of efficient nitrate catalysts from the perspective of the reaction mechanism.Secondly,this review mainly focuses on the recent advances in the direction of eNO_(3RR)with four types of TMCs,Fe,Co,Ni and Cu,and unveils the interfacial modulation strategies of Fe,Co,Ni and Cu catalysts for the activity,reaction pathway and stability.Finally,reasonable suggestions and opportunities are proposed for the challenges and future development of eNO_(3)RR.This review provides far-reaching implications for exploring cost-effective TMCs to replace high-cost noble metal catalysts(NMCs)for eNO_(3)RR.

Heterogeneous catalytic activation of peroxymonosulfate for efficient degradation of organic pollutants by magnetic Cu^0/Fe_3O_4 submicron composites

Magnetic Cu^0/Fe3O4 submicron composites were prepared using a hydrothermal method and used as heterogeneous catalysts for the activation of peroxymonosulfate（PMS） and the degradation of organic pollutants.The as-prepared magnetic Cu^0/Fe3O4 submicron composites were composed of Cu^0 and Fe3O4 crystals and had an average size of approximately 220 nm.The Cu^0/Fe3O4 composites could efficiently catalyze the activation of PMS to generate singlet oxygen,and thus induced the rapid degradation of rhodamine B,methylene blue,orange Ⅱ,phenol and 4-chlorophenol.The use of0.1 g/L of the Cu^0/Fe3O4 composites induced the complete removal of rhodamine B（20 μmol/L） in15 min,methylene blue（20 μmol/L） in 5 min,orange Ⅱ（20 μmol/L） in 10 min,phenol（0.1mmol/L） in 30 min and 4-chlorophenol（0.1 mmol/L） in 15 min with an initial pH value of 7.0 and a PMS concentration of 0.5 mmol/L.The total organic carbon（TOC） removal higher than 85%for all of these five pollutants was obtained in 30 min when the PMS concentration was 2.5 mmol/L.The rate of degradation was considerably higher than that obtained with Cu^0 or Fe3O4 particles alone.The enhanced catalytic activity of the Cu^0/Fe3O4 composites in the activation of PMS was attributed to the synergistic effect of the Cu^0 and Fe3O4 crystals in the composites.Singlet oxygen was identified as the primary reactive oxygen species responsible for pollutant degradation by electron spin resonance and radical quenching experiments.A possible mechanism for the activation of PMS by Cu^0/Fe3O4 composites is proposed as electron transfer from the organic pollutants to PMS induces the activation of PMS to generate ^1O2,which induces the degradation of the organic pollutants.As a magnetic catalyst,the Cu^0/Fe3O4 composites were easily recovered by magnetic separation,and exhibited excellent stability over five successive degradation cycles.The present study provides a facile and green heterogeneous catalysis method for the oxidative removal of organic pollutants.

Highly dispersed V_2O_5/TiO_2 modified with transition metals(Cu,Fe,Mn,Co) as efficient catalysts for the selective reduction of NO with NH_3

Different transition metals were used to modify V2O5-based catalysts （M-V, M = Cu, Fe, Mn, Co） on TiO2 via impregnation, for the selective reduction of NO with NH3. The introduced metals induced high dispersion in the vanadium species and the formation of vanadates on the TiO2 support, and increased the amount of surface acid sites and the strength of these acids. The strong acid sites might be responsible for the high N2 selectivity at higher temperatures. Among these catalysts, Cu-V/TiO2 showed the highest activity and N2 selectivity at 225-375 ~C. The results of X-ray photo- electron spectroscopy, NH3-temperature-programmed desorption, and in-situ diffuse reflectance infrared Fourier transform spectroscopy suggested that the improved performance was probably due to more active surface oxygen species and increased strong surface acid sites. The outstanding activity, stability, and SO2/H2O durability of Cu-V/TiO2 make it a candidate to be a NOx removal catalyst for stationary flue gas.

Electrochemical reduction process of Co(Ⅱ) in citrate solution

Effects of citrate concentration and pH on the electrochemical reduction process of Co（Ⅱ） were investigated by cyclic voltammetry（CV） and electrochemical impedance spectroscopy（EIS）. The results show that Co（Ⅱ） is reduced into two species which are free Co2＋ and [Co（C6H607）] in the solution composed of 0.05 mol/L CoS04·5H2O, 0.20 mol/L Na2SO4 and 0-0.40 mol/L C6H5O7Na3·2H2O in the pH range of 3-9. The reduction behavior depends on the pH of the solution. Co（H） is mainly reduced into the form of free Co^2＋ at pH 3 and into the form of [Co（C6H6O7）] at the pH range of 4-6 in citrate solution. The [Co（C6H6O7）] is first reduced to an intermediate state and then to Co°. Adsorption of the intermediate state exists on the surface of the electrode. Co（Ⅱ） is difficult to be reduced in the solution with the pH above 7, because the existing Co（Ⅱ）-citrate complex species [Co（C6H5O7）]- and [Co（C6H4O7）]2- are more difficult to be reduced than the hydrogen ion.

Synthesis of high-capacity LiNi_(0.8)Co_(0.1)Mn_(0.1)O_2 cathode by transition metal acetates

LiNi0.8Co0.1Mn0.1O2 cathode was synthesized using transition metal acetates under different synthesis conditions. Simultaneous thermogravimetric–differential scanning calorimetry–derivative thermogravimetric analysis was applied to investigating the mixture of transition metal acetates. X-ray powder diffraction and charge–discharge test were adopted to characterize the as-prepared LiNi0.8Co0.1Mn0.1O2. The mixture of transition metal acetates undergoes dehydration and decomposition during heating. All the examined LiNi0.8Co0.1Mn0.1O2 samples have a layered structure with R3 m space group. LiNi0.8Co0.1Mn0.1O2 samples prepared with different lithium sources under different synthesis conditions exhibit very different charge–discharge performances. The sample synthesized via the procedure of sintering at 800 °C after heating lithium carbonate and transition metal acetates at 550 °C achieves a highest capacity of 200.8 m A·h/g and an average capacity of 188.1 mA ·h/g in the first 20 cycles at 0.2C.

Gel Filtration Chromatography Combined with Bradford Method for Determination of Total Residual Protein in Ferment Antibiotics

Aim A novel method has been developed for evaluation of the levels of total residual protein in antibiotics produced by fermentation using gel filtration chromatography (GFC) combined with Bradford assay based on determination of residual protein in lincomycin hydrochloride. Methods The chromatographic conditions were SuperdexTM peptide column, 0.01 mol*L-1 phosphate buffer solution as mobile phase, and flow rate of 1 mL·min-1. Five hundred microliters of lincomycin hydrochloride solution (3 g of lincomycin hydrochloride dissolved in 10 mL of mobile phase) was injected into the chromatograph and the eluted solution was collected between 6 min and 14.5 min (protein eluted from column within this period), and the residual content of total protein in the eluted solution was assayed using Bradford assay method. Results The average recovery was more than 90% for bovine serum albumin, the calibration equation for the range of 0-12 μg·mL-1 of protein was y=-0.002 4x2+0.064 2x+0.002 9, r2=0.999 9, RSD=0.1%-0.9%, and the LOD and LOQ were 3 and 10 ng·mL-1 of protein, respectively. Conclusion The novel method for determining the residual protein in ferment antibio-tics is simple, rapid, and precise.

国外简讯

温度对过酸盐分解和棉织物 漂白过程的影响 本文揭示了用由化学方法制取的工业用过硼酸钠和过硼酸钾,以及实验室条件下由电化学方法制取的过硼酸钠、过硼酸钾、过碳酸钠、过碳酸钾漂白时分解与漂白作用间的温度关系曲线. 在289～388K温度范围内进行均匀热解,温度保持不变,精确度±0.1。用高锰酸盐法测定有效氧,其误差不超过2％。在各种温度条件下,过氧化酸分解服从于一级动力学方程。 式中:C_0、C_1分别表示过氧化酸盐溶液的起始浓度和在时间t的浓度,k为速度常数。

漂白之化学

过酸盐作为漂白剂加入家庭洗衣产品是在二十世纪初期,尽管过氧化物在十九世纪八十年代已用于织物和纤维漂白,当时Bernard Laporte最早提供给商业。术语漂白指的是发色团的破坏。

Bicarbonate activation of hydrogen peroxide: A new emerging technology for wastewater treatment

The serious limitations of available technologies for decontamination of wastewater have compelled researchers to search for alternative solutions. Catalytic treatment with hydrogen peroxide, which appears to be one of the most efficient treatment systems, is able to degrade various organics with the help of powerful ·OH radicals. This review focuses on recent progress in the use of bicarbonate activated hydrogen peroxide for wastewater treatment. The introduction of bicarbonate to pollutant treatment has led to appreciable improvements, not only in process efficiency, but also in process stability. This review describes in detail the applications of this process in homogeneous and heterogeneous systems. The enhanced degradation, limited or lack of leaching during heterogeneous degradation, and prolonged catalysts stability during degradation are salient features of this system. This review provides readers with new knowledge regarding bicarbonate, including the fact that it does not always harm pollutant degradation, and can significantly benefit degradation under some conditions.

Mechanisms of Salt Tolerance in Transgenic Arabidopsis thaliana Carrying a Peroxisomal Ascorbate Peroxidase Gene from Barley

Ascorbate peroxidases （APX）, localized in the cytosol, peroxisome, mitochondria, and chloroplasts of plant cells, catalyze the reduction of H2O2 to water by using ascorbic acid as the specific electron donor. To determine the role of peroxisomal type ascorbate peroxidase （pAPX）, an antioxidant enzyme, in protection against salt-induced oxidative stress, transgenic Arabidopsis thaliana plant carrying a pAPX gene （HvAPX1） from barley （Hordeum vulgate L.） was analyzed. The transgenic line pAPX3 was found to be more tolerant to salt stress than the wild type. Irrespective of salt stress, there were no significant differences in Na^＋, K^＋, Ca^2＋, and Mg^2＋ contents and the ratio of K^＋ to Na^＋ between pAPX3 and the wild type. Clearly, the salt tolerance in pAPX3 was not due to the maintenance and reestablishment of cellular ion homeostasis. However, the degree of H2O2 and lipid peroxidation （measured as the levels of malondialdehyde） accumulation under salt stress was higher in the wild type than in pAPX3. The mechanism of salt tolerance in transgenic pAPX3 can thus be explained by reduction of oxidative stress injury. Under all conditions tested, activities of superoxide, glutathione reductase, and catalase were not significantly different between pAPX3 and the wild type. In contrast, the activity of APX was significantly higher in the transgenic plant than in wild type under salt stress. These results suggested that in higher plants, HvAPX1 played an important role in salt tolerance and was a candidate gene for developing salttolerant crop plants.

Synergistic degradation of phenols by bimetallic CuO-Co_3O_4@γ-Al_2O_3 catalyst in H_2O_2/HCO_3^- system

The development of new catalytic techniques for wastewater treatment has long attracted much attention from industrial and academic communities.However,because of catalyst leaching during degradation,catalysts can be short lived,and therefore expensive,and unsuitable for use in wastewater treatment.In this work,we developed a bimetallic CuO-Co3O4@γ-Al2O3 catalyst for phenol degradation with bicarbonate-activated H2O2.The weakly basic environment provided by the bicarbonate buffer greatly suppresses leaching of active Cu and Co metal ions from the catalyst.X-ray diffraction and X-ray photoelectron spectroscopy results showed interactions between Cu and Co ions in the CuO-Co3O4@γ-Al2O3 catalyst,and these improve the catalytic activity in phenol degradation.Mechanistic studies using different radical scavengers showed that superoxide and hydroxyl radicals both played significant roles in phenol degradation,whereas singlet oxygen was less important.

Peroxymonosulfate activation by Mn_3O_4/metal-organic framework for degradation of refractory aqueous organic pollutant rhodamine B

An environmentally friendly Mn‐oxide‐supported metal‐organic framework(MOF),Mn3O4/ZIF‐8,was successfully prepared using a facile solvothermal method,with a formation mechanism proposed.The composite was characterized using X‐ray diffraction,scanning electron microscopy,transmission electron microscopy,X‐ray photoelectron microscopy,and Fourier‐transform infrared spectroscopy.After characterization,the MOF was used to activate peroxymonosulfate(PMS)for degradation of the refractory pollutant rhodamine B(RhB)in water.The composite prepared at a0.5:1mass ratio of Mn3O4to ZIF‐8possessed the highest catalytic activity with negligible Mn leaching.The maximum RhB degradation of approximately98%was achieved at0.4g/L0.5‐Mn/ZIF‐120,0.3g/L PMS,and10mg/L initial RhB concentration at a reaction temperature of23°C.The RhB degradation followed first‐order kinetics and was accelerated with increased0.5‐Mn/ZIF‐120and PMS dosages,decreased initial RhB concentration,and increased reaction temperature.Moreover,quenching tests indicated that?OH was the predominant radical involved in the RhB degradation;the?OH mainly originated from SO4??and,hence,PMS.Mn3O4/ZIF‐8also displayed good reusability for RhB degradation in the presence of PMS over five runs,with a RhB degradation efficiency of more than96%and Mn leaching of less than5%for each run.Based on these findings,a RhB degradation mechanism was proposed.

Mechanistic studies on peroxymonosulfate activation by g-C3N4 under visible light for enhanced oxidation of light-inert dimethyl phthalate

Excitation of metal-free graphitic carbon nitride(g-C3N4) under visible light can successfully achieve efficient activation of peroxymonosulfate(PMS). Synergistic effects and involved mechanism were systematically investigated using a light-inert endocrine disrupting compound, dimethyl phthalate(DMP), as the target pollutant. Under visible light irradiation, DMP could not be degraded by direct g-C3 N4-mediated photocatalysis, while in the presence of PMS, the dominant radicals were converted from ·O2 to SO4·– and ·OH, resulting in effective DMP degradation and mineralization. Results showed that higher dosage of PMS or g-C3 N4 could increase the activation amount of PMS and corresponding DMP degradation efficiency, but the latter approach was more productive in terms of making the most of PMS. High DMP concentration hindered effective contact between PMS and g-C3 N4, but could provide efficient use of PMS. Higher DMP degradation efficiency was achieved at p H lower than the point of zero charge(5.4). Based on intermediates identification, the DMP degradation was found mainly through radical attack(·OH and SO4·–) of the benzene ring and oxidation of the aliphatic chains.

Experimental research on oxidation of phenol by activated persulfate

In this paper, the optimum process parameters were obtained through treating phenol of simulated semi-coking wastewater using heat, Fe2＋, Fe^0 and semi-coke to catalyze persulfate. The results of phenol decomposition using PS catalyzed by heating, Fe2＋, Fe^0 and semi-coke were compared for selecting a better activating way. The article investigated the effects of temperature, catalyzer dosage, pH value and reaction time. The experiment showed the four methods can all catalyzed the process. Under the experimental conditions of heating, Fe2＋, Fe^0 and semi-coke degradation rate could reach to 20.7%, 75.1%, 94.5% and 40.0%, respectively. On this basis, this study established an Lt6（45） table to analyze the main influencing factors in semi-coke/Fe^0 catalyzing system. Under the optimum conditions, the degradation rate of Phenol reached to 93.6%. However, the PS dosage was reduced by 14.4%.

Pedogenic Carbonate and Soil Dehydrogenase Activity in Response to Soil Organic Matter in Artemisia ordosica Community

Little attention has been paid to the role of soil organic matter （OM） in the formation of pedogenic carbonate in desert soils. The relationships among soil OM, soil dehydrogenase activity （DHA）, and soil CaCO3 in a plant community dominated by Artemisia ordosica, located on the eastern boundary of Tcngger Desert in the Alxa League, Inner Mongolia, China, were studied to understand whether OM was directly involved in the formation of pedogenic carbonate. The results showed that DHA and CuCO3 positively correlated with OM content, and DHA, OM, and CaCO3 were correlated with each other in their spatial distribution, indicating that abundant OM content contributed to the formation of CaCO3. Therefore, the formation of pedogenic CaCO3 was a biotic process in the plant community dominated by A. ordosica.

Acute liver failure is frequent during heat stroke

Acute liver failure （ALF） is relatively frequent during heat stroke （HS）. This risk must be emphasized, because its inddence is higher than is usually thought. In a recent study by Weigand et al, two cases were reported in which liver failure was the leading symptom. We have confirmed their conclusion in a study of 25 cases of HS with ALF, compared with 25 other cases without ALE Moreover, we observed that hypophosphatemia on admission could predict occurrence of ALF during HS. As for clinical and other biological parameters, phosphatemia should be monitored for at least 3 d in all cases of HS, even when it is thought to be mild.

Effect of chelating agent on oxidation rate of aniline in ferrous ion activated persulfate system at neutral pH

In the interest of accelerating aniline degradation, Fe2+ and chelated Fe2+ activated persulfate oxidations were investigated in neutral pH condition. Three kinds of chelating agents were selected including citric acid, oxalic acid and ethylenediamine tetraaceatate(EDTA) to maintain available Fe2+. The results indicate that the concentration of chelating agent and ferrous ion didn't follow a linear relationship with the degradation rate of aniline. A 1/1 ratio of chelating agent/Fe2+ results in a higher degradation rate compared to the results by other ratios. The oxidation enhancement factor using oxalic acid was found to be relatively low. In contrast, citric acid is more suitable chelating agent in the ferrous iron activated persulfate system and aniline exhibits a highest degradation with a persulfate/Fe2+/citric acid/aniline molar ratio of 50/25/25/1 compared to other molar ratios.

Extraction of vanadium from stone coal by modified salt-roasting process

In order to reduce the pollution of Cl2 and HCl released during extracting vanadium from stone coal by sodium chloride roasting, a modified salt-roasting process was proposed by adding calcined lime in roasting process followed by H2SO4 leaching. The effects of parameters including roasting temperature, roasting time, addition mass ratio of NaCI, calcined lime upon leaching rate of vanadium and curing rate of chlorine were investigated, and the effects of leaching time and leaching temperature on leaching rate of vanadium were also studied. The results show that the vanadium leaching rate and the curing rate of chlorine are 67.3% and 51.5% （mass fraction）, respectively, at roasting temperature of 750℃, roasting time of 4 h, 15% sodium chloride and 8% （mass fraction） calcined lime, leaching temperature of room temperature, and leaching time of 4 h.