This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellite...This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellites launched by one vehicle, high-pressure staged combustion cycle engine and oxygen tank self-pressurization, sandwich bulkhead tank with 200 K temperature difference, and 7-day quick-launch using the "three horizontals" test and launch mode with integral transportation and erection. The future development of the quick-launch launch vehicle is predicted based upon the need for vehicle mission coverage improvement, better response speed, and stronger market competiveness.展开更多
The development history of the project design of spaceflight launching site in China and the main forms used in these designs were introduced in this thesis, and it was pointed out that the spaceflight launch should n...The development history of the project design of spaceflight launching site in China and the main forms used in these designs were introduced in this thesis, and it was pointed out that the spaceflight launch should not use only one fixed model. According to its nation condition, China should design and build the launching project facility and device which correspond to the technology development of spacecraft and carrier rocket.展开更多
A method based on the virtual prototype technology simulating the separation of a launch vehicle from its aircraft in the aircraft wake was proposed based on the internally carried air-launched launch vehicle program....A method based on the virtual prototype technology simulating the separation of a launch vehicle from its aircraft in the aircraft wake was proposed based on the internally carried air-launched launch vehicle program.In this method,the full-scale model of the aircraft,the vehicle and the parachute are constructed.Then,they are imported into the ADAMS software,constraint solutions and driving forces are then added for visual dynamic simulation.The unsteady aerodynamic forces of the vehicle in the aircraft wake are calculated by CFD and the moving grid technique.The forces generated by the parachute can be derived from the Kirchhoff motion equation.Through comparing and analyzing the simulation results under different launch conditions,it has been proven that this method simulates the separation of a launch vehicle from the aircraft in the aircraft wake accurately.It provides the foundation for the aggregate project of internally carried air-launch vehicles,and offers a new referenced method for multi-body dynamic simulation.展开更多
The technological development status of new generation low cost small-lift launch vehicles applied to small satellite launch is investigated in this paper. The development trends are summarized, including low cost and...The technological development status of new generation low cost small-lift launch vehicles applied to small satellite launch is investigated in this paper. The development trends are summarized, including low cost and rapid response capability, utilization of mature rocket and missile technology, the development of mobile launch technology adopting air-based platforms and use of innovative technology. Moreover, the external power and internal demand of the small-lift launch vehicle are analyzed and the market prospect is forecasted. Finally, proposals for the development of small-lift launch vehicles are put forward, including exploration of the potential of existing rocket and missile technology, development of multi-platform mobile launch technology and further application of innovative technology and ideas.展开更多
Tianjin Aerospace Long March Rocket Manufacturing Co.,Ltd.under CASC successfully completed the digital assembly of the first-stage hydrogen tank and oxygen tank and the inter-tank section of the LM-5 launch vehicle f...Tianjin Aerospace Long March Rocket Manufacturing Co.,Ltd.under CASC successfully completed the digital assembly of the first-stage hydrogen tank and oxygen tank and the inter-tank section of the LM-5 launch vehicle for its maiden flight.It is the first time that indigenous developed equipment,for digital assembly,was used formally in product assembly,展开更多
The GF-3 satellite was successfully launched at 06：55 Beijing time on August10 using a LM-4C launch vehicle from the Taiyuan Satellite Launch Center.The launch was the 233rd flight of a LM family launch vehicle and t...The GF-3 satellite was successfully launched at 06：55 Beijing time on August10 using a LM-4C launch vehicle from the Taiyuan Satellite Launch Center.The launch was the 233rd flight of a LM family launch vehicle and the carrier rocket LM-4C was developed by the Shanghai Academy of Spaceflight Technology.展开更多
New program was proposed in LM-6 rolling control technology that using high-pressure staged combustion gas. Launch vehicle rolling control by just one engine was realized. Under the limit of the rolling control moment...New program was proposed in LM-6 rolling control technology that using high-pressure staged combustion gas. Launch vehicle rolling control by just one engine was realized. Under the limit of the rolling control moment of the launch vehicle, a new attitude dynamic model is established. Interference source and how to reduce the effect was analyzed, and method of designing a pre-compensated robust controller was proposed. Simulation and flight resuits showed that the attitude dynamic model established and the pre-compensation robust controller proposed in this paper could solve the key problems with a strong coupling attitude controller, and realize high quality and high reliability control in wind areas, and improve the capability of the launch vehicle.展开更多
文摘This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellites launched by one vehicle, high-pressure staged combustion cycle engine and oxygen tank self-pressurization, sandwich bulkhead tank with 200 K temperature difference, and 7-day quick-launch using the "three horizontals" test and launch mode with integral transportation and erection. The future development of the quick-launch launch vehicle is predicted based upon the need for vehicle mission coverage improvement, better response speed, and stronger market competiveness.
文摘The development history of the project design of spaceflight launching site in China and the main forms used in these designs were introduced in this thesis, and it was pointed out that the spaceflight launch should not use only one fixed model. According to its nation condition, China should design and build the launching project facility and device which correspond to the technology development of spacecraft and carrier rocket.
基金Supported by the National Natural Science Foundation Programme of China(No.61374145)
文摘A method based on the virtual prototype technology simulating the separation of a launch vehicle from its aircraft in the aircraft wake was proposed based on the internally carried air-launched launch vehicle program.In this method,the full-scale model of the aircraft,the vehicle and the parachute are constructed.Then,they are imported into the ADAMS software,constraint solutions and driving forces are then added for visual dynamic simulation.The unsteady aerodynamic forces of the vehicle in the aircraft wake are calculated by CFD and the moving grid technique.The forces generated by the parachute can be derived from the Kirchhoff motion equation.Through comparing and analyzing the simulation results under different launch conditions,it has been proven that this method simulates the separation of a launch vehicle from the aircraft in the aircraft wake accurately.It provides the foundation for the aggregate project of internally carried air-launch vehicles,and offers a new referenced method for multi-body dynamic simulation.
文摘The technological development status of new generation low cost small-lift launch vehicles applied to small satellite launch is investigated in this paper. The development trends are summarized, including low cost and rapid response capability, utilization of mature rocket and missile technology, the development of mobile launch technology adopting air-based platforms and use of innovative technology. Moreover, the external power and internal demand of the small-lift launch vehicle are analyzed and the market prospect is forecasted. Finally, proposals for the development of small-lift launch vehicles are put forward, including exploration of the potential of existing rocket and missile technology, development of multi-platform mobile launch technology and further application of innovative technology and ideas.
文摘Tianjin Aerospace Long March Rocket Manufacturing Co.,Ltd.under CASC successfully completed the digital assembly of the first-stage hydrogen tank and oxygen tank and the inter-tank section of the LM-5 launch vehicle for its maiden flight.It is the first time that indigenous developed equipment,for digital assembly,was used formally in product assembly,
文摘The GF-3 satellite was successfully launched at 06：55 Beijing time on August10 using a LM-4C launch vehicle from the Taiyuan Satellite Launch Center.The launch was the 233rd flight of a LM family launch vehicle and the carrier rocket LM-4C was developed by the Shanghai Academy of Spaceflight Technology.
文摘New program was proposed in LM-6 rolling control technology that using high-pressure staged combustion gas. Launch vehicle rolling control by just one engine was realized. Under the limit of the rolling control moment of the launch vehicle, a new attitude dynamic model is established. Interference source and how to reduce the effect was analyzed, and method of designing a pre-compensated robust controller was proposed. Simulation and flight resuits showed that the attitude dynamic model established and the pre-compensation robust controller proposed in this paper could solve the key problems with a strong coupling attitude controller, and realize high quality and high reliability control in wind areas, and improve the capability of the launch vehicle.
