《论语》学史上几个陈案与新知——兼论杨义先生的诸子还原学

本文结合《论语》学史上"五十以学《易》"、适周问礼于老、哀公季孙问政和"门人不敬子路"等几桩陈案,从还原与学科会通、还原与证据成链、还原与人物和著述编年、考据与生命同情和历史在场四个方面,总结诸子还原学的几大特征及其研究方法的范式意义。从中我们可见,先秦诸子还原是一种方法,一种信念、一种情怀,一种生命的同情和历史的在场。

纯化学还原方法制备银纳米棒及其SERS活性

本文使用一种纯化学还原的新方法合成银纳米棒 ,即在类棒状的胶束剂中用种子诱导其生长。加入不同的种子浓度 ,可以得到不同长径比的纳米棒。在不同长径比的纳米棒溶液中 ,利用SCN-

锌粉对聚氯乙烯的机械化学还原脱氯

以锌粉为还原剂进行了聚氯乙烯(PVC)的机械化学还原脱氯(简称脱氯)探索研究,考察了球磨转速、球料比(磨球与试样的质量比)、锌粉与PVC质量比等对脱氯率的影响,并对脱氯产物进行了X射线衍射、红外光谱等分析。实验结果表明,最佳工艺条件为球料比33、球磨转速528r/min、锌粉与PVC质量比9;产物中未形成结晶性氯化锌,且锌粉被氧化成ZnO;行星球磨比搅拌球磨对PVC的脱氯效果好,球磨时间超过3h,PVC的脱氯率可接近100%。

植物氧化还原蛋白质组学的研究进展

植物氧化还原调节参与细胞的每一个代谢,影响细胞稳态和能量平衡。植物中氧化还原翻译后修饰在调节酶活性和控制生理过程中具有重要的意义。在众多研究蛋白氧化应激翻译后修饰的技术中,尤以蛋白质组分析方法最适合。对蛋白质可逆的氧化还原翻译后修饰、氧化应激、氮化应激、抗病防御和细胞氧化还原应激与调控进行了综述,并探讨了氧化还原蛋白质组学的研究前景。

Single-atom catalysts based on polarization switching of ferroelectric In_(2)Se_(3) for N_(2) reduction

The polarization switching plays a crucial role in controlling the final products in the catalytic pro-cess.The effect of polarization orientation on nitrogen reduction was investigated by anchoring transition metal atoms to form active centers on ferroelectric material In_(2)Se_(3).During the polariza-tion switching process,the difference in surface electrostatic potential leads to a redistribution of electronic states.This affects the interaction strength between the adsorbed small molecules and the catalyst substrate,thereby altering the reaction barrier.In addition,the surface states must be considered to prevent the adsorption of other small molecules(such as *O,*OH,and *H).Further-more,the V@↓-In_(2)Se_(3) possesses excellent catalytic properties,high electrochemical and thermody-namic stability,which facilitates the catalytic process.Machine learning also helps us further ex-plore the underlying mechanisms.The systematic investigation provides novel insights into the design and application of two-dimensional switchable ferroelectric catalysts for various chemical processes.

Chalcogen heteroatoms doped nickel-nitrogen-carbon single-atom catalysts with asymmetric coordination for efficient electrochemical CO_(2) reduction

The electronic configuration of central metal atoms in single-atom catalysts(SACs)is pivotal in electrochemical CO_(2) reduction reaction(eCO_(2)RR).Herein,chalcogen heteroatoms(e.g.,S,Se,and Te)were incorporated into the symmetric nickel-nitrogen-carbon(Ni-N_(4)-C)configuration to obtain Ni-X-N_(3)-C(X:S,Se,and Te)SACs with asymmetric coordination presented for central Ni atoms.Among these obtained Ni-X-N_(3)-C(X:S,Se,and Te)SACs,Ni-Se-N_(3)-C exhibited superior eCO_(2)RR activity,with CO selectivity reaching~98% at-0.70 V versus reversible hydrogen electrode(RHE).The Zn-CO_(2) battery integrated with Ni-Se-N_(3)-C as cathode and Zn foil as anode achieved a peak power density of 1.82 mW cm^(-2) and maintained remarkable rechargeable stability over 20 h.In-situ spectral investigations and theoretical calculations demonstrated that the chalcogen heteroatoms doped into the Ni-N_(4)-C configuration would break coordination symmetry and trigger charge redistribution,and then regulate the intermediate behaviors and thermodynamic reaction pathways for eCO_(2)RR.Especially,for Ni-Se-N_(3)-C,the introduced Se atoms could significantly raise the d-band center of central Ni atoms and thus remarkably lower the energy barrier for the rate-determining step of ^(*)COOH formation,contributing to the promising eCO_(2)RR performance for high selectivity CO production by competing with hydrogen evolution reaction.

Theoretical insights into oxygen reduction reaction on Au-based single-atom alloy cluster catalysts

Developing highly active alloy catalysts that surpass the performance of platinum group metals in the oxygen reduction reaction(ORR)is critical in electrocatalysis.Gold-based single-atom alloy(AuSAA)clusters are gaining recognition as promising alternatives due to their potential for high activity.However,enhancing its activity of AuSAA clusters remains challenging due to limited insights into its actual active site in alkaline environments.Herein,we studied a variety of Au_(54)M_(1) SAA cluster catalysts and revealed the operando formed MO_(x)(OH)_(y) complex acts as the crucial active site for catalyzing the ORR under the basic solution condition.The observed volcano plot indicates that Au_(54)Co_(1),Au_(54)M_(1),and Au_(54)Ru_(1) clusters can be the optimal Au_(54)M_(1) SAA cluster catalysts for the ORR.Our findings offer new insights into the actual active sites of AuSAA cluster catalysts,which will inform rational catalyst design in experimental settings.

Solid-state reduction kinetics and mechanism of pre-oxidized vanadium-titanium magnetite concentrate

The solid-state reduction kinetics of pre-oxidized vanadium-titanium magnetite concentrate was studied. The phase and microstructure of the reduction product were characterized by XRD, SEM and EDS methods, based on which the mechanism of the solid-state reduction was investigated. The results showed that using coal as reductant at 950-1100 °C, the solid-state reduction of the pre-oxidized vanadium-titanium magnetite concentrate was controlled by interface chemical reaction and the apparent activation energy was 67.719 k J/mol. The mineral phase transformation during the reduction process can be described as follows： pre-oxidized vanadium-titanium magnetite concentrate → ulvospinel → ilmenite → Fe Ti2O5 →（FenTi1-n）Ti2O5. M3O5-type（M can be Fe, Ti, Mg, Mn, etc） solid solutions would be formed during the reduction process of the pre-oxidized vanadium-titanium magnetite concentrate at 1050 °C for 60 min. The poor reducibility of iron in M3O5 solid solutions is the main reason to limit the reduction property of pre-oxidized vanadium-titanium magnetite concentrate.

Non-isothermal reduction kinetics of Fe_2O_3-NiO composites for formation of Fe-Ni alloy using carbon monoxide

The non-isothermal reduction kinetics and mechanism of Fe2O3-NiO composites with different Fe2O3-NiO compacts using carbon monoxide as reductant were investigated. The results show that the reduction degree increases rapidly with increasing the content of NiO, and the presence of NiO also improves the reduction rate of iron oxides. It is found that NiO is preferentially reduced at the beginning of the reactions, and then the metallic Ni acts as a catalyst promoting the reduction rate of iron oxides. It is also observed that the increase of the Ni O content enhances the formation of awaruite(FeNi3) but decreases the percentage of kamacite(Fe,Ni) and taenite(Fe,Ni). The particle size of the materials tends to be uniform during the reduction process due to the presence of metallic nickel, metallic iron and the formation of Fe-Ni alloy. The concentration of CO in the product gas is greater than that of CO2 at the beginning of the reaction and then slows down. The fastest reduction rate of Fe2O3-NiO composites with CO appears at 400-500 °C, and nucleation growth model can be used to elucidate the reduction mechanism. Nucleation growth process is found to be the rate controlling step when the temperature is lower than 1000 °C.

Kinetics of extracting magnesium from mixture of calcined magnesite and calcined dolomite by vacuum aluminothermic reduction

The vacuum aluminothermic reduction of the mixture of calcined magnesite and calcined dolomite was studied. An isothermal reduction method satisfying the vacuum aluminothermic reduction was proposed. The experiments were carried out at 4 Pa. The results indicate that the reduction rate is increased with increasing temperature, content of aluminum and pellet forming pressure. The XRD patterns of pellets at different reduction stages confirm that the reduction process can be roughly classified into three stages：the formation of MgAl2O4, and Ca12Al14O33 phases;the phase transformation from MgAl2O4 and C12A7 to CaAl2O4;the formation of CaAl4O7 phase. The experimental data were divided into three parts according to the kinetic models. The apparent activation energies of the three parts were determined to be 98.2, 133.0 and 223.3 kJ/mol, respectively.

Electrochemical mechanism of electrolysis codeposition of Mg-Sr alloy in molten salt

The electrochemical process of Mg-Sr codeposition was studied in MgCl2-SrCl2-KCl melts containing different MgCl2 concentrations at 700 ℃ by cyclic voltammetry, chronopotentiometry and chronoamperometry. The results show that the actual precipitation potential of Sr reduces by nearly 0.5 V because of the depolarization effects of Sr activity reduced by forming Mg-Sr alloy. The codeposition potential condition of Mg and Sr to form Mg-Sr alloy is as follows： When electrode potential is more negative than -1.5 V, the magnesium will precipitate; when electrode potential is more negative than -2.0 V, the magnesium and strontium will both deposit. The control step of codeposition process of Mg and Sr is not diffusion control step. The codeposition current condition of Mg and Sr to form Mg-Sr alloy by chronoptentiometry is as follows： cathode current densities are higher than 0.71, 1.57 and 2.83 A/cm^2 in MgCl2-SrCl2-KCl melts with MgCl2 concentrations of 2%, 5% and 10% （mass fraction）, respectively. Key words：

Flexible free-standing graphene-like film electrode for supercapacitors by electrophoretic deposition and electrochemical reduction

Electrophoretic deposition in conjunction with electrochemical reduction was used to make flexible free-standing graphene-like films. Firstly, graphene oxide （GO） film was deposited on graphite substrate by electrophoretic deposition method, and then reduced by subsequent electrochemical reduction of GO to obtain reduced GO （ERGO） film with high electrochemical performance. The morphology, structure and electrochemical performance of the prepared graphene-like film were confirmed by SEM, XRD and FT-IR. These unique materials were found to provide high specific capacitance and good cycling stability. The high specific capacitance of 254 F/g was obtained from cyclic voltammetry measurement at a scan rate of 10 mV/s. When the current density increased to 83.3 A/g, the specific capacitance values still remained 132 F/g. Meanwhile, the high powder density of 39.1 kW/kg was measured at energy density of 11.8 W-h/kg in 1 mol/L H2SO4 solution. Furthermore, at a constant scan rate of 50 mV/s, 97.02% of its capacitance was retained for 1000 cycles. These promising results were attributed to the unique assembly structure of graphene film and low contact resistance, which indicated their potential application to electrochemical capacitors.

Electrochemical reduction process of Co(Ⅱ) in citrate solution

Effects of citrate concentration and pH on the electrochemical reduction process of Co（Ⅱ） were investigated by cyclic voltammetry（CV） and electrochemical impedance spectroscopy（EIS）. The results show that Co（Ⅱ） is reduced into two species which are free Co2＋ and [Co（C6H607）] in the solution composed of 0.05 mol/L CoS04·5H2O, 0.20 mol/L Na2SO4 and 0-0.40 mol/L C6H5O7Na3·2H2O in the pH range of 3-9. The reduction behavior depends on the pH of the solution. Co（H） is mainly reduced into the form of free Co^2＋ at pH 3 and into the form of [Co（C6H6O7）] at the pH range of 4-6 in citrate solution. The [Co（C6H6O7）] is first reduced to an intermediate state and then to Co°. Adsorption of the intermediate state exists on the surface of the electrode. Co（Ⅱ） is difficult to be reduced in the solution with the pH above 7, because the existing Co（Ⅱ）-citrate complex species [Co（C6H5O7）]- and [Co（C6H4O7）]2- are more difficult to be reduced than the hydrogen ion.

机械化学还原法制备Al_2O_3-Mo_3Si/Mo_5Si_3纳米复合粉体

以MoO3、Si粉和Al粉为原料,采用机械化学还原法制备了Al2O3-Mo3Si/Mo5Si3纳米复合粉体.利用X射线衍射(XRD)、激光粒度分析仪(LPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)和差热-热重分析(DTA-TG)等对复合粉体和球磨过程中粉体的固态反应过程进行表征.结果显示,MoO3-Si-Al混合粉体球磨5h后转变为Al2O3-Mo3Si/Mo5Si3复合粉体,反应为机械诱导的自蔓延反应.球磨20h后,Mo3Si、Mo5Si3和Al2O3的晶粒尺寸分别为27.5、23.3和31.8nm,产物具有纳米晶结构,粉体平均粒度为3.988μm,颗粒呈球形,分布均匀.DTA分析表明,复合粉体在机械化学反应过程中首先发生MoO3和Al之间的铝热反应,之后将发生一系列Mo和Si之间的反应,生成Mo5Si3和Mo3Si.

Mechano-chemical sulfidization of zinc oxide by grinding with sulfur and reductive additives

A novel process for sulfidation of ZnO by co-grinding with sulfur and reductive additives （P, Fe, A1, and Mg） was developed. The sulfidation extent of ZnO with the addition of P, Fe, A1 or Mg can reach 85.2%, 81.6%, 96.7% and 92.6% after grinding for 4, 6, 1 and 1 h, respectively. Based on the chemical phase composition analysis and morphological characteristics of sulfidized products by XRD, SEM and TEM, a possible reaction mechanism, mechanically induced self-propagating reaction （MSR）, was proposed to explain the sulfidization reaction. In addition, the floatability of sulfidized products was investigated for the recovery of metal sulfide and ZnS can be concentrated with a high concentration ratio and concentrate grade. By using the sulfidizing process, it is expected that the recovery of zinc from the wastes or purification of heavy-metal-containing hazardous residues is technically feasible.

Fabrication of Cu_2O@Cu_2O core-shell nanoparticles and conversion to Cu_2O@Cu core-shell nanoparticles in solution

Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.

Coating titanium on carbon steel by in-situ electrochemical reduction of solid TiO_2 layer

Ti coating on A3 steel was successfully prepared by direct electrochemical reduction of high-velocity oxy-fuel （HVOF） thermally sprayed and room-temperature dip-coating titanium dioxide coating on A3 steel in molten CaCl2 at 850 ℃. The interfacial microstructure and mutual diffusion between coating and steel substrate were investigated using scanning electron microscopy （SEM） and energy dispersive X-ray （EDX） spectroscopy. The results show that the precursory TiO2 coating prepared by HVOF has closer contact and better adhesion with the A3 steel substrate. After electrolysis, all of the electro-generated Ti coatings show intact contact with the substrates, regardless of the original contact situation between TiO2 layer and the steel substrate in the precursors. The inter-diffusion between the iron substrate and the reduced titanium takes place at the interface. The results demonstrate the possibility of the surface electrochemical metallurgy （SECM） is a promising surface engineering and additive manufacturing method.

Ag-Ni alloy nanoparticles for electrocatalytic reduction of benzyl chloride

Ag-based nanocatalysts exhibit good catalytic activity for the electrochemical reduction of organic halides. Ag-Ni alloy nanoparticles（NPs） were facilely prepared by chemical reduction, and the as-prepared nanocatalysts were characterized by X-ray diffraction, ultraviolet-visible spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectroscopy. The electrocatalytic activity of Ag-Ni NPs for benzyl chloride reduction was studied in organic medium using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. The results show that the addition of Ni element can obviously decrease the size of Ag-Ni NPs, shift the reduction peak potential（φp） of benzyl chloride positively, and increase the catalytic activity of Ag-Ni NPs. However, when the Ni content reaches a certain value, the catalytic activity of Ag-Ni NPs decreases. Meanwhile, the synergistic catalytic effect of Ag-Ni NPs was also discussed.

Cloning and Bioinformatic Analysis of Cinnamoyl-CoA Reductase Gene (CCR) from Pennisetum purpureum

[Objective] The aim was to clone the cDNA and DNA sequences of the CCR （Cinnamoyl-CoA reductase） gene which involves in lignin biosynthesis, from Pennisetum purpureum, and to make comprehensive analysis on these sequences. [Method] CCR sequences were cloned from P. purpureum by using conventional RT-PCR and RACE （Rapid Amplification of cDNA Ends） methods; and the bioinformatic analyses of the CCR were conducted by means of NCBI, ProtParam ProtScale, TMHMM, TargetP, SignalP, Pfam20.0, Prosite, Swiss-Model, ClustalW2, DNAman, DNAstar and MEGA5. [Result] The cloned PpCCR （P. purpureum CCR） cDNA sequence was 1 316 bp, including a 1 110 bp ORF and 206 bp 3’-UTR. The cloned DNA sequence from PpCCR was 6 133 bp in full-length, containing five exons and four introns. Bioinformatic analysis indicated that PpCCR encoded a polypeptide of 369 amino acids, the secondary structure of which was primarily composed of random coil and α-helix, belonging to NAD-dependent epimerase/dehydratase family, and its co-factor binding sites and substrate binding sites were highly conserved. [Conclusion] DNA and cDNA sequences of CCR gene were obtained from P. purpureum, which had the typical characteristics of other homologous genes. The obtained bioinformatic data provided theoretical references for the further analysis of CCR and better application of P. purpureum in the future.

Size control and its mechanism of SnAg nanoparticles

Sn3.5Ag （mass fraction, %） nanoparticles were synthesized by an improved chemical reduction method at room temperature. 1,10-phenanthroline and sodium borohydride were selected as the surfactant and reducing agent, respectively. It was found that no obvious oxidation of the synthesized nanoparticles was traced by X-ray diffraction. In addition, the results show that the density of primary particles decreases with decreasing the addition rate of the reducing agent. Moreover, the slight particle agglomeration and slow secondary particle growth can result in small-sized nanoparticles. Meanwhile, the effect of surfactant concentration on the particle size can effectively be controlled when the reducing agent is added into the precursor at an appropriate rate. In summary, the capping effect caused by the surfactant molecules coordinating with the nanoclusters will restrict the growth of the nanoparticles. The larger the mass ratio of the surfactant to the precursor is, the smaller the particle size is.