期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
还原-磨选法制备铁粉的组织与性能 被引量:5
1
作者 刘东华 钱晓泰 +1 位作者 梁毅 梁建昂 《金属材料与冶金工程》 CAS 2013年第1期8-11,共4页
通过元素分析、扫描电镜、流动性、松装密度和压缩性能测定,对还原-磨选法制备的铁粉进行成分、显微组织和机械性能分析。结果表明:采用还原-磨选法以低品位钒钛磁铁矿为原料制备铁粉,还原铁粉中Ti、V、Co、Ni等元素以固溶和游离两种形... 通过元素分析、扫描电镜、流动性、松装密度和压缩性能测定,对还原-磨选法制备的铁粉进行成分、显微组织和机械性能分析。结果表明:采用还原-磨选法以低品位钒钛磁铁矿为原料制备铁粉,还原铁粉中Ti、V、Co、Ni等元素以固溶和游离两种形式存在,粉末的成分和性能均符合国家标准,并与瑞典赫格纳斯铁粉相接近,该铁粉制备工艺简单、生产成本低且产品性能稳定,有利于提高铁基粉末冶金材料性能。 展开更多
关键词 还原-磨选 显微组织 流动性 压缩性
下载PDF
还原-磨选法处理云南钛铁矿精矿的实验研究 被引量:1
2
作者 余宇楠 范兴祥 +4 位作者 袁威 昝林寒 张金梁 刘振楠 姚春玲 《云南冶金》 2017年第5期33-38,51,共7页
针对云南钛铁精矿的物相组成,提出了内配还原剂并辅加添加剂、粘结剂混磨制团进行固态还原,磨选分别获得还原铁粉和尾渣,尾渣酸浸制备富钛料的工艺;重点讨论还原时间、还原剂配比、还原温度、添加剂配比、磁选强度对还原铁粉指标的影响... 针对云南钛铁精矿的物相组成,提出了内配还原剂并辅加添加剂、粘结剂混磨制团进行固态还原,磨选分别获得还原铁粉和尾渣,尾渣酸浸制备富钛料的工艺;重点讨论还原时间、还原剂配比、还原温度、添加剂配比、磁选强度对还原铁粉指标的影响;在固定还原-磨选制度,讨论酸浓度、酸浸时间对富钛料指标的影响;对实验物料和还原、磨选、酸浸过程中物相变化进行了分析。通过实验,获得了最佳的工艺参数:还原剂配比10%、添加剂配比5.0%、粘结剂配比1%,还原温度1210℃,还原时间3 h;磨选工艺参数:矿浆浓度60%,球磨时间2.0 h,磁选强度80 m T;浸出工艺参数:硫酸浓度20%、液固比4∶1、浸出温度为95℃、浸出时间为3h、搅拌速度为250 r/min。在此工艺条件下,还原铁粉全铁为96.01%,富钛料中二氧化钛含量为76.94%。该工艺流程简单,钛铁得到有效利用,还原铁粉可用于湿法冶金的还原剂,富钛料为优质钛白原料,为钛铁精矿综合利用提供借鉴作用。 展开更多
关键词 云南钛精矿 还原-磨选 还原铁粉 富钛料 浸出
下载PDF
还原—磨选工艺在有色冶金中的应用研究现状及展望
3
作者 张金梁 卢萍 +2 位作者 范兴祥 宋群玲 李亚东 《昆明冶金高等专科学校学报》 CAS 2019年第5期1-9,共9页
还原-磨选工艺技术是一种有色金属的高效共性富集技术。系统地介绍了还原-磨选工艺技术在贵金属的回收富集、红土镍矿中回收镍钴铁、钒钛磁铁矿中回收钒钛铁、钛精矿中富集钛和尾矿及冶金渣中回收稀土元素等方面的应用,分析了还原-磨选... 还原-磨选工艺技术是一种有色金属的高效共性富集技术。系统地介绍了还原-磨选工艺技术在贵金属的回收富集、红土镍矿中回收镍钴铁、钒钛磁铁矿中回收钒钛铁、钛精矿中富集钛和尾矿及冶金渣中回收稀土元素等方面的应用,分析了还原-磨选工艺技术在应用中存在问题及未来的发展方向。 展开更多
关键词 还原-磨选工艺 富集技术 磁性产物 回收率
下载PDF
Mechanism of phosphorus removal in beneficiation of high phosphorous oolitic hematite by direct reduction roasting with dephosphorization agent 被引量:18
4
作者 徐承焱 孙体昌 +3 位作者 寇珏 李永利 莫晓兰 唐利刚 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第11期2806-2812,共7页
High phosphorous oolitic hematite ore is one of typical intractable iron ores in China, and the conventional beneficiation methods are found to be impracticable to , remove phosphorus from the ore effectively. Better ... High phosphorous oolitic hematite ore is one of typical intractable iron ores in China, and the conventional beneficiation methods are found to be impracticable to , remove phosphorus from the ore effectively. Better beneficiation index were gotten by direct reduction roasting with dephosphorization agent followed by two stages of grinding and magnetic separation. P content decreases from 0.82% in the raw ore to 0.06% in the magnetic concentrate, and the total iron grade increases from 43.65% to 90.23%, the recovery of iron can reach 87%. Mechanisms of phosphorus removal in the beneficiation of high phosphorous oolitic hematite ore by direct reduction roasting with dephosphorization agent were studied using XRD, SEM and EPMA. The results showed that about 20% of the apatite in the raw ore transferred into phosphorus and volatilized with the gas in the process of reduction roasting, while the rest 80% apatite was not involved in the reaction of generation of phosphorus, and remained as apatite in the roasted products, which was removed to tailings by grinding and magnetic separation. A small amount of phosphorus existed in the magnetic concentrate as apatite. The oolitic texture of raw ore was partly changed during roasting, resulting in the formation of nepheline in the reaction between the dephosphorization agent, SiO2 and Al2O3 in the raw ore, which greatly improved the liberation degree of minerals in the roasted products, and it was beneficial to the subsequent grinding and magnetic separation. 展开更多
关键词 high phosphorous oolitic hematite direct reduction roasting phosphorus removal -dephosphorization agent GRINDING magnetic separation
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部