多信息远程统控警报系统的研究

介绍一种多功能、多信息远程统一控制的警报系统的实现方法。该系统基于无线和有线相结合的控制方式,采用超短波无线集群、有线专线、GPRS无线接入等多种途径进行互联组网,在强化警报发放报知功能的前提下,能够实现话音、图像、数据、控制命令和自检信号等多元信息的远程统一控制功能。

Application of remote monitoring technology in landslides in the Luoshan mining area

With the scale extending of mining, the landslide disaster in the earth’s surface will become more and more serious, and these landslide disasters are being threatened to the sustainable safe mining of the underground mine and the open-pit mine. Based on the theory that sliding force is greater than the shear resistance (resisting force) at the potential slip surface is the necessary and sufficient condition to occur the landslide as the sliding criterion, the principle and method for sliding force remote monitoring is presented, and the functional relationship between the human mechanical quantity and the natural sliding force is derived, hereby, the natural sliding force can be calculated according to the human mechanical quantity. Based on above principle and method, a new system of landslide remote monitoring is designed and 53 systems are installed on the landslide body in the Luoshan mining area, which make up the landslide remote monitoring network. According to the results of field test around 8 months, monitoring curves between sliding force and time are obtained, which can describe and forecast the develop trend of landslide. According to above analysis, the results show that this system has some following advantages: (1) real-time monitoring; (2) remote intelligent transmission; (3) landslides early warning.

DCS devices based non-linear process control system design for plants with distributed time-delay using particle filter

Remote control process system with distributed time-delay has attracted much attention in different fields.In this paper,non-linear remote control of a single tank process system with wireless network is considered.To deal with the distributed time-delay in a large-scale plant,the time-delay compensation controller based on DCS devices is designed by using operator theory and particle filter.Distributed control system(DCS)device is developed to monitor and control from the central monitoring room to each process.The particle filter is a probabilistic method to estimate unobservable information from observable information.First,remote control system and experimental equipment are introduced.Second,control system based on an operator theory is designed.Then,process system with distributed time-delay using particle filter is carried out.Finally,the actual experiment is conducted by using the proposed time-delay compensation controller.When estimating with the proposed method,the result is close to the case in which the distributed time-delay does not exist.The effectiveness of the proposed control system is confirmed by experiment results.

Implementation of remote monitoring system for prediction of tool wear and failure using ART2

Remote monitoring of tools for prediction of tool wear in cutting processes was considered, and a method of implementation of a remote-monitoring system previously developed was proposed. Sensor signals were received and tool wear was predicted in the local system using an ART2 algorithm, while the monitoring result was transferred to the remote system via intemet. The monitoring system was installed at an on-site machine tool for monitoring three kinds of tools cutting titanium alloys, and the tool wear was evaluated on the basis of vigilances, similarities between vibration signals received and the normal patterns previously trained. A number of experiments were carried out to evaluate the performance of the proposed system, and the results show that the wears of finishing-cut tools are successfully detected when the moving average vigilance becomes lower than the critical vigilance, thus the appropriate tool replacement time is notified before the breakage.

Study on remote monitoring system for landslide hazard based on Wireless Sensor Network and its application

Based on Beidou satellite communication platform, sliding force remote monitoring and warning system was widely used in Lingbao Luoshan gold ore, which had achieved remarkable social and economical benefits. However, there is one monitoring point at every 1 000 m2, and their distribution is so discrete that it will no doubt increase construction and operation cost if every monitoring point was installed a Beidou subscriber machine. Therefore, based on Zigbee wireless sensor network technology, network structure and the nodes, embed wireless sensor node in remote monitoring and warning system, a base platform of local wireless sensor network is formed, and it can combine punctiform monitoring information with planar network and transmit concentrated information through Beidou satellite terminal machine; as a result, this largely expands the transmission distance of monitoring data

Remote Control and Telemetry System for Large-scale Model Test at Sea

Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary to have a stable experimental system for the test.Since the experimental area is large, a remote control system and a telemetry system are essential, and were designed by the authors.An experiment was conducted on the Songhuajiang River to test the systems.The relationship between the model's speed and its electromotor's revolutions was also measured during the model test.The results showed that the two systems make it possible to carry out large-scale model tests at sea.

Stability and remote real-time monitoring of the slope slide body in the Luoshan mining area

Landslides have occurred frequently in the Luoshan mining area because of disordered mining.This paper discusses the landforms and physiognomy,hydro-meteorology,formation lithology,and geologic structure of the Luoshan mining area.It also describes the factors influencing the slope stability of landslide No.Ⅲ,determines the general parameters and typical section plane,analyzes the stress-strain state of the No.Ⅲ slope,and calculates its safety factors with FLAC3 D under saturated and natural conditions.Based on a stability analysis,a remote real-time monitoring system was applied to the No.Ⅲ slope,and these monitoring data were collected and analyzed.

A New Remote and Automated Control System for the Vineyard Hail Protection Based on ZigBee Sensors, Raspberry-Pi Electronic Card and WiMAX

A new inexpensive vineyard protection against hailstorm has been realized and tested. The system has been designed and organized in such a way to perform autonomously local activities to physically control the protection of the vineyard but also to transmit information toward a remote control. Each row has an ＂umbrella＂ designed by the authors which, unlike other commercial solutions, protects the product without hindering all the mechanical activities typical of a modem vineyard. Locally the single umbrella uses an electronic card for the management and a ZigBee mesh telecommunication network to transmit data to a central control unit which manages the protection. Because of its efficiency, a Raspberry-Pi control card has been chosen as central unit. Finally, a WiMAX connection was chosen to remotely control the system, thus allowing the authors to overcome distance limitations of commercial Wi-Fi networks. The system has been realized and tested for some months in field also during a hailstorm. The results of these tests proved how the system is easy to use and effectively protects against hail; moreover the authors proved the high reliability of the mechanical components which allow the authors to lower the maintenance costs.

The Remote Monitoring System Research Based on Embedded Web Server

The paper analyze and design and implement a remote control system based on embedded web server network. A computer network remote control system mainly includes server, client and the control information. Server registration information realize the user command; client provides network hardware, software and other system resources, the system response message and then feedback service instruction. The research results show that, the embedded web server can be assigned to the field device user information through the browser, field device data also can access to the browser through the web server. In order to achieve remote monitoring, control, diagnostics and configuration of the equipment.

Monitoring and Recognition of Debris Flow Infrasonic Signals

Low frequency infrasonic waves are emitted during the formation and movement of debris flows, which are detectable in a radius of several kilometers, thereby to serve as the precondition for their remote monitoring.However, false message often arises from the simple mechanics of alarms under the ambient noise interference.To improve the accuracy of infrasound monitoring for early-warning against debris flows, it is necessary to analyze the monitor information to identify in them the infrasonic signals characteristic of debris flows.Therefore, a large amount of debris flow infrasound and ambient noises have been collected from different sources for analysis to sum up their frequency spectra, sound pressures, waveforms, time duration and other correlated characteristics so as to specify the key characteristic parameters for different sound sources in completing the development of the recognition system of debris flow infrasonic signals for identifying their possible existence in the monitor signals.The recognition performance of the system has been verified by simulating tests and long-term in-situ monitoring of debris flows in Jiangjia Gully,Dongchuan, China to be of high accuracy and applicability.The recognition system can provide the local government and residents with accurate precautionary information about debris flows in preparation for disaster mitigation and minimizing the loss of life and property.

The Development of Intelligent Home Remote Monitoring System based on B/S Framework

This paper deeply studies the intelligent Home embedded system based on B/S architecture. Firstly, analysis requirement of Home function based on the existing software development mode, and proposed a system framework of intelligent Home system, and designed the communication scheme of the whole Home system, also gives the system each function module realization. This paper achieve two basic service system based on Intelligent Home through a series of analysis and design： outdoor remote intelligent Home monitoring service and the indoor intelligent management service.

Design of DSP-based Embedded Video Remote Monitoring System

Presented is a scheme of an embedded video remote monitoring system based on TMS320DM642. Using DM642 as the data processing core, the remote monitoring system is composed of video acquisition module, video processing module and communication module, which gives an implementation of class/mini driver module in DSP/BIOS integrated developing environment and also a common task module in application layer is achieved. The system realizes the entire functions of the analog video signal acquisition, H.264 video coding and Internet transmission. It provides the general connection for the future development and has good flexibility and extendibility. The system uses a modular design and overall development of programming methods to improve the efficiency of system development.

Design of Remote Control System of Intelligent Community Based on Embedded Web Server

A multichannel remote control system for imelligent community based on the STC89C54 chip was designed with the technique of embedded Web server. The control system can monitor 255 signals and eight control signals of one node at the same time, and can be connected to the internet by the TCP/IP protocol. So the field control information can be shown dynamically in a remote computer by way of web pages. The system has high convenience and friendly monitoring interface, then especially is fit for the large conamunity and storage that need multipoint monitoring and frequent switching door.

QoE Assessment in Haptic Teleoperation Systems： Position-Position versus Position-Force

In this paper, we make a comparison of haptic control schemes （position-position and position-force control schemes） for two haptic teleoperation systems by QoE （quality of experience） assessment. One is a remote control system with haptic media and video. In the system, we can write characters by controlling a haptic interface device at a remote place with another haptic interface device while watching video. The other is a remote instruction system with haptic media, video and voice. By using the system, a teacher can actively write characters and teach a student how to write the characters. The student can also write characters actively, and the teacher can confirm how the student writes the characters. We investigate the influences of network delay on QoE for the two systems with the two haptic control schemes.

The Design and Implementation of Multi-user Data Sharing Platform for Remote Monitoring System Based on Virtual Instruments

Remote data monitoring system which adopts virtual instrument usually applies data sharing, acquisition and remote transmission technology via internet. It is able to finish concurrent data acquisition and processing for multi-user and multi-task and also build a personalized virtual testing environment for more people but with fewer instruments. In this paper, we＇ 11 elaborate on the design and implementation of information sharing platform through a typical example of how to build multi-user concurrent virtual testing environment based on the virtnal software LabVIEW.

Analysis and Design of Open Remote Monitor and Control System Based on Virtual Reality

Introduced a Web-based real-time network monitoring and control system design methods, the 3-D VR was applied in a remote monitor system based on browser/server structure, and a VRML and Java based 3-D remote monitor system was realized. Meanwhile, give possible solutions of the real-time data transmission and the stability of the system.

Design and Implementation of Remote Control System of Coal Mine Conveyor Belt based on PLC

Aiming at the existing problems of safety, reliability and flexibility in the traditional coal mine belt transport system, this paper designed the mine centralized control system transmitted by CAN bus and PLC as the core, and use comparison instructions and trigger of Siemens S7-200 PLC, the article has elaborated the four level conveyor belt sequence control, realized the sequence start, reverse sequence stop and fault processing and other functions for four level conveyor belt, the compared with traditional timer control instructions scheme, the design has clear thinking, simple design program, and is easy to be extended to multilevel belt drive sequence control.

Design and Implementation of Computer Network Remote Control System

The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information realize the user command; client provides network hardware, software and other system resources, the system response message and then feedback service instruction; control information transmission layer implementation using TCPflP protocol to control information including control of resources and control commands etc.. This paper adopts centralized network control system model, the structure of the network system realize unified observation, control, coordination, and control of high efficiency. The use of key technologies, such as Socket and COM to realize the goal of computer hardware resource control, software resource management and other functions.

Designation and Realization of Softswitch-based Remote Video-monitoring System

In this paper, architecture of softswitch-based Next Generation Network (NGN) system and Session Initiation Protocol (SIP) are studied briefly, and the problems on the openness and extensibility of normal remote video-monitoring system (RVMS) are analyzed. Then a RVMS framework model based on softswitch is given. Furthermore, designation and realization of the system based on T 6000 Softswitch Platform is provided. The innovation is considering the RVMS as a part of softswitch system. It is a feasible scheme for implementing next generation video-monitoring system based on broadband IP technique.

Monitoring of Large Size Solar Thermal Systems： Design and Data Analysis

This paper describes how to achieve an efficient design and management of a tele-monitoring system of several solar thermal plants. The system will be able to make an analysis that assures a more efficient management of each plant and of the whole system. In the first part of this study, the features of the monitoring system that allows to monitor the operating parameters and to discover the issues before they actually become dangerous for the plant have been identified. The data collected in the different solar thermal systems realized in Italian jails have been analyzed. The results of these elaborations allowed us both to find out some anomalies of functioning of the plants, and to optimize the management of the whole plant in a more efficient way.