期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
基于响应面法对一种连续型矩形微波反应器加热效果的模拟优化 被引量:3
1
作者 吴雁泽 金光远 +2 位作者 邹鹏程 韩太柏 崔政伟 《化学工业与工程》 CAS CSCD 北大核心 2021年第4期84-94,共11页
为了提高连续流微波反应器的物料温升以及加热均匀性,设计了一种具有特殊形状管道的连续流动矩形微波反应器,运用多物理场耦合计算的方式,探究了物料流速、馈口功率、馈口高度与管道高度对反应器的加热效果和加热均匀性的影响规律。研... 为了提高连续流微波反应器的物料温升以及加热均匀性,设计了一种具有特殊形状管道的连续流动矩形微波反应器,运用多物理场耦合计算的方式,探究了物料流速、馈口功率、馈口高度与管道高度对反应器的加热效果和加热均匀性的影响规律。研究结果表明:当管道与馈口平面相近时,物料有较高的温升,但加热均匀性较差;而当2者相距较远时,物料温升较小,但均匀性较好。通过运用响应面分析法对反应器结构进行优化:最高温升率可以达到24.28%;加热均匀性最佳的的管道高度为-38.88 mm,馈口高度为32.81 mm。 展开更多
关键词 连续流动反应器 微波加热 加热均匀性 响应面分析 多物理场仿真
下载PDF
层流区反应
2
《现代化工》 CAS CSCD 北大核心 2004年第8期67-67,共1页
关键词 层流区反应 连续流动反应器 化学反应 液流扩张
下载PDF
沸石的连续流动相合成 被引量:1
3
作者 潘迪 刘鹏 +1 位作者 张宏斌 唐颐 《化学进展》 SCIE CAS CSCD 北大核心 2020年第7期873-881,共9页
由于沸石分子筛在多个领域被广泛应用,高效可靠的沸石合成方法早已成为人们研究的重点。相较于传统高压釜水热间歇合成方法,沸石的连续流动相合成方法晶化时间短,时空产率高,是近年来发展的沸石合成新路线。利用连续流动反应器(CFR)的... 由于沸石分子筛在多个领域被广泛应用,高效可靠的沸石合成方法早已成为人们研究的重点。相较于传统高压釜水热间歇合成方法,沸石的连续流动相合成方法晶化时间短,时空产率高,是近年来发展的沸石合成新路线。利用连续流动反应器(CFR)的热延迟效应低、传质效果好和方法拓展性强等特点,可以在分钟级乃至秒级时间内实现高结晶度沸石合成,大大提升了合成效率和可控度。基于近期该领域的进展,本文介绍了沸石的连续流动反应器结构,其合成过程优势和产物特点及受限之处,并对其未来应用加以展望。 展开更多
关键词 连续流动反应器 热延迟 沸石合成
原文传递
CSTR系统中氢气燃烧特性的分岔分析
4
作者 曾文 解茂昭 +2 位作者 贾明 艾延廷 王成军 《燃烧科学与技术》 EI CAS CSCD 北大核心 2009年第1期40-44,共5页
运用分岔理论,采用了氢气的详细化学反应机理,对连续流动均匀搅拌反应器(CSTR)中氢气的燃烧特性进行详细的分析.分别以系统温度、滞留时间为分岔参数,详细讨论了CSTR系统的各种工况(系统压力、入口混合气过量空气系数、系统温度及滞留时... 运用分岔理论,采用了氢气的详细化学反应机理,对连续流动均匀搅拌反应器(CSTR)中氢气的燃烧特性进行详细的分析.分别以系统温度、滞留时间为分岔参数,详细讨论了CSTR系统的各种工况(系统压力、入口混合气过量空气系数、系统温度及滞留时间)对混合气着火特性的影响.结果表明,当以系统温度为分岔参数时,系统压力及滞留时间对混合气的燃烧特性影响较大,而过量空气系数影响较小;当以滞留时间为分岔参数时,系统温度对混合气燃烧特性有较大的影响. 展开更多
关键词 连续流动均匀搅拌反应器(CSTR) 分岔理论 氢气 着火特性
下载PDF
Reactor Network Synthesis Based on Instantaneous Objective Function Characteristic Curves 被引量:2
5
作者 张治山 赵文 +2 位作者 王艳丽 周传光 袁希钢 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2003年第4期436-440,共5页
It is believed that whether the instantaneous objective function curves of plug-flow-reactor (PFR) and continuous-stirred-tank-reactor (CSTR) overlap or not, they have a consistent changing trend for complex reactions... It is believed that whether the instantaneous objective function curves of plug-flow-reactor (PFR) and continuous-stirred-tank-reactor (CSTR) overlap or not, they have a consistent changing trend for complex reactions (steady state, isothermal and constant volume). As a result of the relation of the objective functions (selectivity or yield) to the instantaneous objective functions (instantaneous selectivity or instantaneous reaction rate), the optimal reactor network configuration can be determined according to the changing trend of the instantaneous objective function curves. Further, a recent partition strategy for the reactor network synthesis based on the instantaneous objective function characteristic curves is proposed by extending the attainable region partition strategy from the concentration space to the instantaneous objective function-unreacted fraction of key reactant space. In this paper, the instantaneous objective function is closed to be the instantaneous selectivity and several samples are examined to illustrate the proposed method. The comparison with the previous work indicates it is a very convenient and practical systematic tool of the reactor network synthesis and seems also promising for overcoming the dimension limit of the attainable region partition strategy in the concentration space. 展开更多
关键词 reactor network synthesis instantaneous objective function PARTITION
下载PDF
Continuous Flow Reactor for Hydroxylation of Benzene to Phenol by Hydrogen Peroxide
6
作者 Li Zhang Hui-hui Liu +1 位作者 Gui-ying Li Chang-wei Hu 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2012年第5期585-591,I0004,共8页
The direct hydroxylation of benzene to phenol catalyzed by activated carbon-supported Fe (Fe/AC) in acetonitrile using H2O2 as the oxidant was studied in a continuous flow reactor. Results showed that the continuous... The direct hydroxylation of benzene to phenol catalyzed by activated carbon-supported Fe (Fe/AC) in acetonitrile using H2O2 as the oxidant was studied in a continuous flow reactor. Results showed that the continuous operation could obtain high phenol yield of 28.1%, coupled with the turnover frequency of 3 h^-1, and high selectivity of 98% under mild condition. The catalyst was characterized by N2 adsorption/desorption, Boehm titration, X-ray photoelectron spectra, and Fourier transform infrared spectroscopy. It was observed that iron may interact with the carboxyl group forming iron-carboxylate like species, which act as the active phase. The apparent activation energy obtained by fitting an Arrhenius model to the experimental data was 13.4 kJ/mol. The reaction order was calculated to be about i, 0.2 for benzene and 0.7 for H202. 展开更多
关键词 Continuous flow reactor HYDROXYLATION Activated carbon Iron-carboxylate Active phase Activation energy
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部