文胸罩杯与胸部形态的适体度研究

以文胸的主体部分——罩杯为研究对象,根据标准人体胸部模型,结合文胸基本纸样设计方法制作一系列罩杯白坯布样,通过拟合标准人体胸部模型与罩杯白坯布样的实验,针对文胸罩杯的不同样板因素对文胸适体度的影响进行了相应的研究。分别以下杯缘和下杯高为定量进行两组实验,从正面和侧面对人体胸部模型着装效果进行对比,研究了下杯高、罩杯省以及下杯缘对文胸罩杯与胸部形态适体度的影响,指出在文胸罩杯的结构设计过程中,三者间存在一定的非线性数量影响关系。

Evolution Law by Generations of Genotype Entropy of the Inbred Population Based on Fitness

The study researched the inbred population which three genotypes of each pair heterozygous gene with different fitness. Change law by generations of genotype ratio was reflected by difference equations. The result showed that the genotype ratio that parents were all heterozygous population tended to balance, about needing 15 generations. The fitness of Rr was over or equal to two times of RR＇s or rr, which was the condition of Rr could be reserved for a long time.

Analysis of the Evolutionary Significance of Heterosis——taking the contribution of fitness to the genetic diversity in random mating population as an example

Upon the analogy of definition of heterosis and inbreeding depresstion in terms of population genetics, the heterosis is thought to be evaluated overall with fitness. By establishing a mathematical model, the equilibrium status of three genotypes of random mating population （i. e. RR, Rr and rr） under different fitness, which exposes that heterosis is the precondition for multiallele to exist in the population. The heterosis protects the genetic diversity and makes the population owning a stronger self-control and evolution potential by improving the hetemzygote＇s fithess so as not to wash out different types of genes. It deepens Darwin＇s thoughts of individual section by making the individual fitness consonant with population fitness.

Effect of Air Velocity on Thermal Comfort under Thermal Environment Ramp Changing

Set points of the indoor air temperature and relative humidity in short-term staying location were studied. In this condition, the thermal reaction of human body varied with the ramp changes of the environmental thermal parameters.The change rules of about 60 subjects′ thermal reaction to the ramp change of environment were surveyed, and the effect of air movement on the thermal reaction during transient condition was considered by using a questionnaire. With the experimental results and research findings under stable condition, a way to set environmental parameters of short-time staying location was recommended.

Innovative Production of PCMs （Phase Change Materials） Preparation by Vacuum Impregnation： Thermal Insulation Efficiency

Energy is essential for every human activity for more comfortable life, but it also consumes more natural resources. Fossil fuel is the major energy source for energy consumption, and it also emits a lot of air pollution during usage to atmosphere and not reproductively. Electrical energy is the secondary energy sources from fossil fuel which is used to operate air conditioning system. In order to control human comfort temperature, it is usually required when the temperature differences swing between indoor and outdoor temperatures. PCMs （phase change materials） are the high latent heat materials which can be used in building materials for energy conservation purpose. PCMs can store thermal energy and prevent heat to pass through temperature control areas. Paraffin has been used as PCMs which is absorbed into the pore of fly ash as paraffin/fly-ash composite and mixed into the buildings materials. Paraffin is an organic material with high melting point （-59 ~C） and nonflammable material, therefore, it can be used as the building materials for the function of PCMs for energy saving purposes. Composite PCMs can be prepared by vacuum impregnation process. Paraffin in liquid form will be impregnated into the pore of fly ash by vacuum capillary force to form paraffin/fly ash composite PCMs. Vacuum impregnation pressures, vacuum times, impregnation times of liquid paraffin in fly ash pores and temperatures for melting the solid paraffin into the liquid form are all affect on the thermal properties of paraffin/fly ash composite PCMs. Composite PCMs will be selected by the optimum thermal properties with optimum of the production conditions for replace the cement powder in the mortar plate compositions. Cement mortar plate with and without composite PCMs will be tested for the thermal insulation properties by comparison as the real day and night time for 8 h period from spot light turn on and off. Temperature detection on the surface and inside the model building under mortar plate with and without composite PCMs is detected every 1 min. Temperature differences between surface of mortar plate over the model building and inside temperature of model building under mortar plates increase with more composite PCMs contents in mortar plates. Thermal insulation efficiency in the building can be enhanced by the composite PCMs utilization as the composition of the building materials.

Removal of Different Dyes by Pseudomonas fluorescens

The effluents of textile dyes are highly colored, and disposal of the wastes into receiving waters cause damage to the environment, therefore dyes removal is of great importance. In this research, removal of Orange II, Remazol Blue, Methyl red, Malachite green and Safranin dyes by Pseudomonas fluorescens was studied in batch system as function of temperature, pH and initial dye concentration. The rate of removal dyes was studied by using pectrophotometer. The optimum value was determined as pH 7 for all dyes tested about 87.8-72.7%, and optimum temperature for removal of all tested dyes was 30℃ about 86.6-60.8%. Higher removal of dyes observed at 25 mL for all tested dyes about 91.9-72,7%. In general, the increase in dye concentration inhibited the growth of bacteria. Pseudomonasfluorescens showed higher removal of Orange II among the dyes tested.