A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI imple...A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI implemented with linear controllers like ramp comparison SP WM (RCSPWM) controllers. A novel operation scheme for DBI and a hysteresis curre nt controlled dual buck half bridge inverter (HCDBI) are proposed. The bias curr ent required by RCSPWM DBI is eliminated and conduction losses are dramatically reduced. HCDBI has greatly improved the modulation performance in DCM region for the benefit of its excellent command tracking capability. The operational schem e and control strategy are presented. Power losses of the conventional half brid ge inverter (CHBI) and HCDBI are compared with mathematical computation, and exp erimental verification is also executed. Both calculational and experimental res ults verify that HCDBI has a superior switching performance over CHBI. Its exce llent high frequency operational capacity provides another access to realize high fre quency operation of inverters.展开更多
Provides the methods to mitigate noise for the upstream channel over HFC networks. We first briefly discuss the HFC network topology, then we describe the sources of noise, the mechanism to form noise, the characteris...Provides the methods to mitigate noise for the upstream channel over HFC networks. We first briefly discuss the HFC network topology, then we describe the sources of noise, the mechanism to form noise, the characteristics of their spectrum, etc. In light of the mechanism to form noise and the characteristics of their spectrum, many methods are put forward in this paper. These methods are evaluated with implementation.展开更多
Considering that the on-line measurement and automatic control of element component content(ECC) are difficult to perform in rare earth cascade extraction process, the ECC distribution profile is dynamically regulated...Considering that the on-line measurement and automatic control of element component content(ECC) are difficult to perform in rare earth cascade extraction process, the ECC distribution profile is dynamically regulated at all stages to assess the effect of product purity control. Focusing on the theory of countercurrent extraction, the technology parameters and pre-setting flow-rates during the extract process are designed. Under varying process parameters, a novel step by step model is also proposed for each stage to analyze the impact on the distribution profile change. Combining the mass balance model and ECC changing trend at the monitoring stage, the ECC distribution profile can be automatically regulated by dynamically compensating the related extract or scrubbing liquid flow-rate. To this end, the required product purity at the two outlets is achieved. Based on Wincc and Matlab dynamic simulators, a specific Pr/Nd cascade extraction process is used to illustrate and demonstrate the application of the present approach.展开更多
To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better si...To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better simulate the logistics fact, which is aimed at periodic inventory checking and pull mode of inventory control strategy, based on the return product arrival time obeying Poisson distribution, the return product employing lotsize process and the nonzero lead time of manufaeturinge/remanufacturing. The rational cost function with multiple constraints is employed to describe the inventory model. The genetic algorithm is employed to solve the inventory cost function to obtain the optimal solution of inventory checking periods, safe inventory point, product lot-sizes and process lot-sizes of return product. An example is presented to prove the feasibility and validity of the proposed method. Moreover, the influence of manufacturing/remanufacturing lead time and reuse rate of return production on the inventory control strategy of enterprise is analyzed.展开更多
An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topo...An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topology of a grid-connected micro-inverter, a mathematical model of the flyback converters is established. Second, a state observer is applied to estimate the currents online and generate corresponding residuals. The fault is diagnosed by comparing the residuals with the thresholds. Finally, a fault-tolerant control that consists of a fault-tolerant topology for the faulty switch and a simple software redundancy control for the faulty current sensor, is proposed to achieve a fault-tolerant operation. The feasibility and effectiveness of the proposed method has been verified by simulation and experimental results.展开更多
The invertible of the Large Air Dense Medium Fluidized Bed (ADMFB) were studied by introducing the concept of the inverse system theory of nonlinear systems. Then the ADMFB, which was a multivariable, nonlinear and co...The invertible of the Large Air Dense Medium Fluidized Bed (ADMFB) were studied by introducing the concept of the inverse system theory of nonlinear systems. Then the ADMFB, which was a multivariable, nonlinear and coupled strongly system, was decoupled into independent SISO pseudo-linear subsystems. Linear controllers were designed for each of subsystems based on linear systems theory. The practice output proves that this method improves the stability of the ADMFB obviously.展开更多
This paper focuses on a combination of three-phase VSI （voltage source inverter） with a predictive current control to provide an optimized system for three-phase inverters that control the load current. A FS-MPC （f...This paper focuses on a combination of three-phase VSI （voltage source inverter） with a predictive current control to provide an optimized system for three-phase inverters that control the load current. A FS-MPC （finite set-model predictive control） strategy for a three-phase VSI for RES （renewable energy systems） applications is implemented. The renewable energy systems model is used in this paper to investigate the system performance when power is supplied to resistive-inductive load. With three different cases, the evaluation of the system is done. Firstly, the robustness of control strategy under variable DC-Link is done in terms of the THD （total harmonic distortion）. Secondly, with one prediction step, the system performance is tested using different sampling time, and lastly, the dynamic response of the system with step change in the amplitude of the reference is investigated. The simulations and result analyses are carried out using Matlab/Simulink to test the effectiveness and robustness of FS-MPC for two-level VSI with AC filter for resistive-inductive load supplied by a renewable energy system.展开更多
The inter-line dynamic voltage restorer （IDVR） consists of several voltage source inverters connected to different independent distribution feeders with common dc bus. When one of the inverters compensates for volta...The inter-line dynamic voltage restorer （IDVR） consists of several voltage source inverters connected to different independent distribution feeders with common dc bus. When one of the inverters compensates for voltage sag that appears in its feeder （voltage control mode）, the other inverters pump the required power into the dc bus （power control mode）. Each inverter will have both voltage and power controllers; only one controller is in use during the abnormal conditions according to its feeder state. The voltage controller uses one of the dynamic voltage restoration techniques. In this paper, the in-phase technique is applied and two types of loads are considered （constant impedance and three phase induction motor）. Since the voltage restoration process may need real power injection into the distribution system, the power controller injects this power via voltage injection. This voltage injection is simulated by voltage drop across series virtual impedance. A new scheme is proposed to select the impedance value. The impedance value is selected such that the power consumed by this impedance represents the required power to be transferred without perturbing the load voltage. The performance of this system is also studied during voltage swell. A scheme for operation of multi-feeder IDVR system is proposed in this paper. Simulation results substantiate the proposed concept.展开更多
文摘A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI implemented with linear controllers like ramp comparison SP WM (RCSPWM) controllers. A novel operation scheme for DBI and a hysteresis curre nt controlled dual buck half bridge inverter (HCDBI) are proposed. The bias curr ent required by RCSPWM DBI is eliminated and conduction losses are dramatically reduced. HCDBI has greatly improved the modulation performance in DCM region for the benefit of its excellent command tracking capability. The operational schem e and control strategy are presented. Power losses of the conventional half brid ge inverter (CHBI) and HCDBI are compared with mathematical computation, and exp erimental verification is also executed. Both calculational and experimental res ults verify that HCDBI has a superior switching performance over CHBI. Its exce llent high frequency operational capacity provides another access to realize high fre quency operation of inverters.
文摘Provides the methods to mitigate noise for the upstream channel over HFC networks. We first briefly discuss the HFC network topology, then we describe the sources of noise, the mechanism to form noise, the characteristics of their spectrum, etc. In light of the mechanism to form noise and the characteristics of their spectrum, many methods are put forward in this paper. These methods are evaluated with implementation.
基金Supported by the National Natural Science Foundation of China(51174091,61164013,61364013)
文摘Considering that the on-line measurement and automatic control of element component content(ECC) are difficult to perform in rare earth cascade extraction process, the ECC distribution profile is dynamically regulated at all stages to assess the effect of product purity control. Focusing on the theory of countercurrent extraction, the technology parameters and pre-setting flow-rates during the extract process are designed. Under varying process parameters, a novel step by step model is also proposed for each stage to analyze the impact on the distribution profile change. Combining the mass balance model and ECC changing trend at the monitoring stage, the ECC distribution profile can be automatically regulated by dynamically compensating the related extract or scrubbing liquid flow-rate. To this end, the required product purity at the two outlets is achieved. Based on Wincc and Matlab dynamic simulators, a specific Pr/Nd cascade extraction process is used to illustrate and demonstrate the application of the present approach.
基金Sponsored by the National High Technology Research and Development Program of China(Grant No.2003AA413210)
文摘To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better simulate the logistics fact, which is aimed at periodic inventory checking and pull mode of inventory control strategy, based on the return product arrival time obeying Poisson distribution, the return product employing lotsize process and the nonzero lead time of manufaeturinge/remanufacturing. The rational cost function with multiple constraints is employed to describe the inventory model. The genetic algorithm is employed to solve the inventory cost function to obtain the optimal solution of inventory checking periods, safe inventory point, product lot-sizes and process lot-sizes of return product. An example is presented to prove the feasibility and validity of the proposed method. Moreover, the influence of manufacturing/remanufacturing lead time and reuse rate of return production on the inventory control strategy of enterprise is analyzed.
基金Project(2012AA051601)supported by the High-Tech Research and Development Program of China
文摘An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topology of a grid-connected micro-inverter, a mathematical model of the flyback converters is established. Second, a state observer is applied to estimate the currents online and generate corresponding residuals. The fault is diagnosed by comparing the residuals with the thresholds. Finally, a fault-tolerant control that consists of a fault-tolerant topology for the faulty switch and a simple software redundancy control for the faulty current sensor, is proposed to achieve a fault-tolerant operation. The feasibility and effectiveness of the proposed method has been verified by simulation and experimental results.
文摘The invertible of the Large Air Dense Medium Fluidized Bed (ADMFB) were studied by introducing the concept of the inverse system theory of nonlinear systems. Then the ADMFB, which was a multivariable, nonlinear and coupled strongly system, was decoupled into independent SISO pseudo-linear subsystems. Linear controllers were designed for each of subsystems based on linear systems theory. The practice output proves that this method improves the stability of the ADMFB obviously.
文摘This paper focuses on a combination of three-phase VSI （voltage source inverter） with a predictive current control to provide an optimized system for three-phase inverters that control the load current. A FS-MPC （finite set-model predictive control） strategy for a three-phase VSI for RES （renewable energy systems） applications is implemented. The renewable energy systems model is used in this paper to investigate the system performance when power is supplied to resistive-inductive load. With three different cases, the evaluation of the system is done. Firstly, the robustness of control strategy under variable DC-Link is done in terms of the THD （total harmonic distortion）. Secondly, with one prediction step, the system performance is tested using different sampling time, and lastly, the dynamic response of the system with step change in the amplitude of the reference is investigated. The simulations and result analyses are carried out using Matlab/Simulink to test the effectiveness and robustness of FS-MPC for two-level VSI with AC filter for resistive-inductive load supplied by a renewable energy system.
文摘The inter-line dynamic voltage restorer （IDVR） consists of several voltage source inverters connected to different independent distribution feeders with common dc bus. When one of the inverters compensates for voltage sag that appears in its feeder （voltage control mode）, the other inverters pump the required power into the dc bus （power control mode）. Each inverter will have both voltage and power controllers; only one controller is in use during the abnormal conditions according to its feeder state. The voltage controller uses one of the dynamic voltage restoration techniques. In this paper, the in-phase technique is applied and two types of loads are considered （constant impedance and three phase induction motor）. Since the voltage restoration process may need real power injection into the distribution system, the power controller injects this power via voltage injection. This voltage injection is simulated by voltage drop across series virtual impedance. A new scheme is proposed to select the impedance value. The impedance value is selected such that the power consumed by this impedance represents the required power to be transferred without perturbing the load voltage. The performance of this system is also studied during voltage swell. A scheme for operation of multi-feeder IDVR system is proposed in this paper. Simulation results substantiate the proposed concept.
