In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb a...In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb and As, respectively, remained in the final tailings and only about 28% of the total Au remained for further cyanidation processes. On the other hand, in bulk method of flotation the maximum Au recovery of 90.6% achieved after 60 min of flotation at the grind size with K80 of 146 micron. In addition, the bulk flotation method resulted in the concentrate with low concentrations of Sb and As elements. To improve the recovery of low-grade refractory gold ores, flotation should be followed by roasting, biological, or pressure oxidation processes so that the gold could be liberated prior to cyanidation processes. It is also found that the pressure oxidation pre-treatment of the concentrates prior to cyanidation may yield high gold recoveries of over than 83%. In these processes, recoveries are controlled by the temperature and the oxygen partial pressure in the solvent. However, by utilizing the bio-oxidation technique, the oxidation of sulfur to sulfate cannot be completed and, consequently, the gold recovery may be limited to only 72.2%.展开更多
Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geo...Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geological,technical,environmental and tectonic parameters.A multi-criteria decision making method is necessary to rank the alternatives.In this paper we describe how plant location is selected by using the Analytic Hierarchy Process(AHP).This method,with eight criteria,was used to select a location for the mineral processing plant at the Sangan iron ore mine(phase 1).Three alternatives for the processing plant were evaluated.The main criteria were distance from the mine,access to heavy machinery transport,the amount of excavation required for grading,bed mixture capacity,belt conveyor length,distance from the tailing dam,distance from the waste dumps and surface water diversion requirements.Finally,the alternatives were ranked and the best location was proposed.展开更多
文摘In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb and As, respectively, remained in the final tailings and only about 28% of the total Au remained for further cyanidation processes. On the other hand, in bulk method of flotation the maximum Au recovery of 90.6% achieved after 60 min of flotation at the grind size with K80 of 146 micron. In addition, the bulk flotation method resulted in the concentrate with low concentrations of Sb and As elements. To improve the recovery of low-grade refractory gold ores, flotation should be followed by roasting, biological, or pressure oxidation processes so that the gold could be liberated prior to cyanidation processes. It is also found that the pressure oxidation pre-treatment of the concentrates prior to cyanidation may yield high gold recoveries of over than 83%. In these processes, recoveries are controlled by the temperature and the oxygen partial pressure in the solvent. However, by utilizing the bio-oxidation technique, the oxidation of sulfur to sulfate cannot be completed and, consequently, the gold recovery may be limited to only 72.2%.
文摘Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geological,technical,environmental and tectonic parameters.A multi-criteria decision making method is necessary to rank the alternatives.In this paper we describe how plant location is selected by using the Analytic Hierarchy Process(AHP).This method,with eight criteria,was used to select a location for the mineral processing plant at the Sangan iron ore mine(phase 1).Three alternatives for the processing plant were evaluated.The main criteria were distance from the mine,access to heavy machinery transport,the amount of excavation required for grading,bed mixture capacity,belt conveyor length,distance from the tailing dam,distance from the waste dumps and surface water diversion requirements.Finally,the alternatives were ranked and the best location was proposed.
