The FCC naphtha selective hydrodesulfurization technology(RSDS-II)has been tested with different feedstocks in pilot scale.The results show that RSDS-II technology is viable in terms of its adaptability to different f...The FCC naphtha selective hydrodesulfurization technology(RSDS-II)has been tested with different feedstocks in pilot scale.The results show that RSDS-II technology is viable in terms of its adaptability to different feedstocks.To produce gasoline with a sulfur content of less than 50μg/g by the RSDS-II technology,the gasoline RON loss is less than 1.8,0.9and 0.2 units,respectively,upon processing the conventional high-sulfur and high-olefin FCC naphtha,the high-sulfur MIP naphtha,and the medium-sulfur or low-sulfur MIP naphtha.Upon using the naphtha produced from pre-hydrotreated FCC feedstock as the RSDS-II feedstock to manufacture gasoline with a sulfur content of lower than 10μg/g,the RON loss does not exceed 1.0 unit.The RSDS-II technology has been commercialized successfully at many refineries.The result of operating commercial RSDS-II unit at the Shanghai Petrochemical Company has revealed that upon processing a feedstock containing 38.7 v% —43.3 v% of olefins and 250—470 mg/g of sulfur,the sulfur content in the treated gasoline ranges from 33μg/g to 46μg/g and the RON loss is equal to only 0.3—0.6 units.Till now this RSDS-II unit has been operating smoothly over 30 months.Thanks to its high HDS activity and good selectivity,the RSDS-II technology can meet the refinery’s needs for adequate upgrading of gasoline.展开更多
The influence of active metal components of catalyst, additives and catalyst preparation method on the reactivity of catalyst for selective hydrodesulfurization (HDS) of FCC naphtha was investigated, and the RSDS-21 c...The influence of active metal components of catalyst, additives and catalyst preparation method on the reactivity of catalyst for selective hydrodesulfurization (HDS) of FCC naphtha was investigated, and the RSDS-21 catalyst with high HDS performance and the RSDS-22 catalyst with high selectivity were developed by RIPP. The composite loading of a new series of catalysts for selective HDS of FCC gasoline has demonstrated excellent desulfurization activity and selectivity and can under conventional hydrotreating conditions manufacture clean gasoline product meeting the national IV emission standard and the Euro V emission standard with less loss in antiknock index. The finalized new series of FCC catalysts upon being adopted for selective HDS of FCC naphtha have good adaptability to different feedstocks along with good stability.展开更多
RIPP has developed the third generation novel DCC catalysts aimed at increasing the propylene yield, named as the MMC series catalysts. This catalyst is of the MFI structure composed of the ZSP zeolite as the main act...RIPP has developed the third generation novel DCC catalysts aimed at increasing the propylene yield, named as the MMC series catalysts. This catalyst is of the MFI structure composed of the ZSP zeolite as the main active component, which has higher capability for producing low-carbon olefins, in particular the propylene. The commercial application of this catalyst at SINOPEC Anqing Petrochemical Company has revealed that the adoption of the MMC-2 catalyst has resulted in a 1.6-4.0 percentages increase in propylene yield under basically similar conditions in terms of the feedstock property and process operating regime coupled with reduction in gasoline olefin COntent and increase in aromatic content to improve the gasoline quality.展开更多
基金financially supported bu the Nationol Key Technology R&D Program of China(2007BAE43B01)and SINOPEC Corporation(contact No.106076)
文摘The FCC naphtha selective hydrodesulfurization technology(RSDS-II)has been tested with different feedstocks in pilot scale.The results show that RSDS-II technology is viable in terms of its adaptability to different feedstocks.To produce gasoline with a sulfur content of less than 50μg/g by the RSDS-II technology,the gasoline RON loss is less than 1.8,0.9and 0.2 units,respectively,upon processing the conventional high-sulfur and high-olefin FCC naphtha,the high-sulfur MIP naphtha,and the medium-sulfur or low-sulfur MIP naphtha.Upon using the naphtha produced from pre-hydrotreated FCC feedstock as the RSDS-II feedstock to manufacture gasoline with a sulfur content of lower than 10μg/g,the RON loss does not exceed 1.0 unit.The RSDS-II technology has been commercialized successfully at many refineries.The result of operating commercial RSDS-II unit at the Shanghai Petrochemical Company has revealed that upon processing a feedstock containing 38.7 v% —43.3 v% of olefins and 250—470 mg/g of sulfur,the sulfur content in the treated gasoline ranges from 33μg/g to 46μg/g and the RON loss is equal to only 0.3—0.6 units.Till now this RSDS-II unit has been operating smoothly over 30 months.Thanks to its high HDS activity and good selectivity,the RSDS-II technology can meet the refinery’s needs for adequate upgrading of gasoline.
文摘The influence of active metal components of catalyst, additives and catalyst preparation method on the reactivity of catalyst for selective hydrodesulfurization (HDS) of FCC naphtha was investigated, and the RSDS-21 catalyst with high HDS performance and the RSDS-22 catalyst with high selectivity were developed by RIPP. The composite loading of a new series of catalysts for selective HDS of FCC gasoline has demonstrated excellent desulfurization activity and selectivity and can under conventional hydrotreating conditions manufacture clean gasoline product meeting the national IV emission standard and the Euro V emission standard with less loss in antiknock index. The finalized new series of FCC catalysts upon being adopted for selective HDS of FCC naphtha have good adaptability to different feedstocks along with good stability.
文摘RIPP has developed the third generation novel DCC catalysts aimed at increasing the propylene yield, named as the MMC series catalysts. This catalyst is of the MFI structure composed of the ZSP zeolite as the main active component, which has higher capability for producing low-carbon olefins, in particular the propylene. The commercial application of this catalyst at SINOPEC Anqing Petrochemical Company has revealed that the adoption of the MMC-2 catalyst has resulted in a 1.6-4.0 percentages increase in propylene yield under basically similar conditions in terms of the feedstock property and process operating regime coupled with reduction in gasoline olefin COntent and increase in aromatic content to improve the gasoline quality.
