国外科技简讯

日本的大米加工流程 日本制米厂的大米加工,是从糙米开始的。其简要流程为:糙米接收→粗选机筛选→计量→选石机去石→糙米仓→有效利用率测定仪品率测定→精米机加工→品率测定→往复振动筛筛选→色选机色选→精米仓→增味剂混合→磁选机磁选→米糠筛→计量包装→出厂 摘自日刊《食品与科学》1994.

Effect and mechanism of octanol in cassiterite flotation using benzohydroxamic acid as collector

The effect of octanol in cassiterite flotation using benzohydroxamic acid (BHA) as a collector was investigated. Theadsorption mechanism of octanol and BHA on the surface of cassiterite was analyzed by adsorption experiments and infrared spectraanalysis. Micro-flotation results indicated that single octanol exhibited almost no collecting power to cassiterite over a wide pHrange. However, as an auxiliary collector, octanol could markedly decrease the consumption of collector BHA and keep the recoveryof cassiterite in high level. The results of adsorption experiments and infrared spectra demonstrated that single octanol was notadsorbed on the surface of cassiterite. It formed adsorption connected with BHA on the surface of cassiterite, and enhanced thehydrophobicity of cassiterite. Octanol promoted the adsorption amount of BHA on the cassiterite surface, and decreased theconsumption of BHA.

Flotation performance and adsorption mechanism of novel 1-(2-hydroxyphenyl)hex-2-en-1-one oxime flotation collector to malachite

A novel collector 1-(2-hydroxyphenyl)hex-2-en-1-one oxime(HPHO)was synthesized from 2-hydroxy acetophenone and butyraldehyde.Its flotation performance and adsorption mechanism to malachite were investigated by flotation test,zeta potential,Fourier transform infrared(FTIR)and X-ray photoelectron spectroscopy(XPS)analysis techniques.Compared with benzohydroxamic acid(BA),1-(2-hydroxyphenyl)ethan-1-one oxime(HPEO)and sodium isobutyl xanthate(SIBX),HPHO exhibited excellent collecting power to malachite without additional reagents,such as Na2S regulator and methyl isobutyl carbinol(MIBC)frother.Results of zeta potential indicated that HPHO was coated on malachite surfaces through a chemisorption process.FTIR and XPS data gave clear evidence for the formation of Cu−oxime complex on malachite surfaces after HPHO adsorption through the linkage between C=C,—OH,N—OH group and Cu species.

Effect of hydroxamic acid polymers on reverse flotation of bauxite

The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates kaolinite in acidic pulp,while HPAM activates both diaspore and kaolinite in the pH range of 2.010.5. The measurement of zeta potential shows that both HAS and HPAM can increase zeta potential of negatively charged diaspore, which indicates the existence of chemical bonding or hydrogen bonding between the reagents and diaspore. By covering the collector dodecyl amine(DDA) on diaspore surface,HAS increases the hydrophilicity of minerals and depresses the flotation of diaspore,however HPAM activates the flotation of diaspore by increasing the adsorption of DDA on diaspore surface.

Effect and mechanism of siderite on reverse anionic flotation of quartz from hematite

Reverse flotation technology is one of the most efficient ways to improve the quality and reduce impurity of iron concentrate. Mineral processors dealing with hematite face a challenge that the flotation results of reverse flotation of hematite are poor in presence of siderite using fatty acid as collector, starch as depressant of iron minerals and calcium ion as activator of quartz at strong alkaline pH. In this work, the effect of siderite on reverse anionic flotation of quartz from hematite was investigated. The effect mechanism of siderite on reverse flotation of hematite was studied by solution chemistry, ultraviolet spectrophotometry(UV) and Fourier transform infrared spectroscopy(FTIR). It was observed that siderite had strong depressive effect on quartz in flotation using sodium oleate as collector, corn starch as depressant of iron minerals and calcium chloride as activator of quartz at strong alkaline pH. The starch was adsorbed onto calcium carbonate by chemical reaction which was formed by CO^(2-)_3 from siderite dissolution and Ca^(2+) from calcium chloride as activator of quartz and precipitated on the surface of quartz, which resulted in improving the hydrophilic ability of quartz.

Flotation separation of molybdenite and talc using tragacanth gum as depressant and potassium butyl xanthate as collector

Tragacanth gum(TG)was explored as a depressant to realize the flotation separation of molybdenite and talc.The flotation experiments indicated that when using potassium butyl xanthate(PBX)as a collector,molybdenite showed excellent floatability while talc was completely depressed by TG,thus realizing the flotation separation of the two minerals.X-ray photoelectron spectroscopy(XPS)analysis results showed that TG was adsorbed on molybdenite surface via chemisorption.The results of contact angle measurement,Fourier transform infrared(FTIR)spectroscopy,and time-of-flight secondary ion mass spectrometry(ToF-SIMS)indicated that the pre-adsorption of TG on molybdenite could not hinder the further chemisorption of PBX on molybdenite.Because PBX has no collecting ability on talc,the flotation separation of molybdenite and talc came true using PBX to collect molybdenite and TG to depress talc.

Activation flotation and mechanism of lime-depressed pyrite with oxalic acid

Flotation tests, contact angle measurements, infrared spectrum analyses, X-ray analyses and computer simulation were carried out in order to study the activation mechanism of lime-depressed pyrite with oxalic acid. The results show that the oxalic acid effectively eliminated the hydrophilic calcium film from the surface of pyrite. Therefore, the efficiency of pyrite flotation was also activated. The results indicate that after reacting with hydrophobic insoluble remainders on the surface of pyrite, oxalic acid can pro- duce hydrophilic compounds, such as CaC03, Ca（OH）2 and Fe（OH）3. As a consequence, a flesh pyrite layer was exposed and its flotation activated.

Effects of mechanical activation on the structural changes and microstructural characteristics of the components of ferruginous quartzite beneficiation tailings

The effects of mechanical activation in a planetary mill on the structural changes and microstructural characteristics of the components of ferruginous quartzite beneficiation railings generated by wet magnetic separation process were studied using X-ray and laser diffraction methods. The results revealed the relationship between variations in the mean particle size of activated powders and the milling time. The crystallite size, microstrain, lattice parameters and unit cell volumes were determined for different milling times in powder samples of quartz, hematite, dolomite, and magnetite from the beneficiation tailings. The main trends in the variation of the crystallite size of quartz, hematite, dolomite, and magnetite as a function mean particle size of powder samples were revealed. Changes in the particle shape as a function of the activation time was also investigated.

A Computer Model for Selecting Equipment in Earth-Fill Dam Projects

Selecting right equipment has been playing an important role in the success of construction projects. This paper presents a computer model, ESCMODEL, for equipment selection in Earth-fill dam projects. The proposed model is capable of assisting the users in making decisions to determine the size, number, type and schedule of presence of dozers, loaders, graders, excavators, trucks, sheepsfoot rollers and smooth wheel rollers. ESCMODEL can contribute to resolve this selection process through the application of an optimization technique, based on nonlinear programming. Three actual case studies of earth-fill dam projects are presented in order to illustrate the effectiveness and performance of the model.