The synthetic index K s for evaluating flip-flow screens is proposed and systematically optimized in view of the whole system. A series of optimized values of relevant parameters are found and then compared with those...The synthetic index K s for evaluating flip-flow screens is proposed and systematically optimized in view of the whole system. A series of optimized values of relevant parameters are found and then compared with those of the current industrial specifications. The results show that the optimized value K s approaches the one of those famous flip-flow screens in the world. Some new findings on geometric and kinematics parameters are useful for improving the flip-flow screens with a low K s value, which is helpful in developing clean coal technology.展开更多
Dense-medium cyclones have been used for beneficiation of fine particles of coal. In this study, the usability of cyclones in the beneficiation of tailings of a coal preparation plant was investigated. For this purpos...Dense-medium cyclones have been used for beneficiation of fine particles of coal. In this study, the usability of cyclones in the beneficiation of tailings of a coal preparation plant was investigated. For this purpose, separation tests were conducted using spiral concentrator and heavy medium cyclones with the specific weight of medium 1.3-1.8 （g/cm^3） on different grading fractions of tailing in an industrial scale （the weight of tail sample was five tons）. Spiral concentrator was utilized to beneficiate particles smaller than 1 mm. In order to evaluate the efficiency of cyclones, sink and float experiments using a specific weight of 1.3, 1.5, 1.7 and 1.9 g/cm^3, were conducted on a pilot scale. Based on the obtained results, the recovery of floated materials in cyclones with the specific weight of 1.40, 1.47 and 1.55 g/cm^3 are 17.75%, 33.80%, and 50%, respectively. Also, the cut point （Pso）, which is the relative density at which particles report equally to the both products are 1.40, 1.67 and 1.86 g/cm^3. The probable errors of separation for defined specific weights for cyclones are 0.080, 0.085 and 0.030, respectively. Also, the coefficients of variation was calculated to be 0.20, 0.12 and 0.03. Finally, it could be said that the performance of a cyclone with a heavy medium of 1.40 g/cm^3 specific weight is desirable compared with other specific weights.展开更多
Taking the city of Qitaihe is as an example in order to provide practical methods for the selection of leading industries for coal resource cities, this paper establishes the specific operation scheme for selection of...Taking the city of Qitaihe is as an example in order to provide practical methods for the selection of leading industries for coal resource cities, this paper establishes the specific operation scheme for selection of leading industries according to the actual situation of coal resource cities based on the theory of coupling coordination together with the coupling coordination for technological innovation. The results show that the degree for coupling coordination of the technological innovation for each alternative industry differentiates with the development of coal resource cities. For example, the average degree of food processing industry from agricultural produce is 0.9. Therefore, coal resource cities should develop some industries related to coal industry, such as coking industry, some chemical and medicines industry and non-metallic mineral products manufacturing, in the near future, however, some industries with greater market and influence potentials and low carbon emissions should be attached much importance to in the future.展开更多
Mathematical model is a powerful means of prediction, simulation and optimization of jig process. And it is also an important part in computer control system. Jig process is divided into two sub-processes, stratifying...Mathematical model is a powerful means of prediction, simulation and optimization of jig process. And it is also an important part in computer control system. Jig process is divided into two sub-processes, stratifying process serially followed by separating process. Taking stratifying process as state transition process of particles in step with jig work cycle, the mathematical model of stratifying is established with Markov chain theory; By analyzing the characteristics and float-sink data of jig, the mathematical model of separating process was submitted. The physical meaning of parameters of the models are explained; the relationship between model and partition was discussed. The fitting result was good with the model.展开更多
文摘The synthetic index K s for evaluating flip-flow screens is proposed and systematically optimized in view of the whole system. A series of optimized values of relevant parameters are found and then compared with those of the current industrial specifications. The results show that the optimized value K s approaches the one of those famous flip-flow screens in the world. Some new findings on geometric and kinematics parameters are useful for improving the flip-flow screens with a low K s value, which is helpful in developing clean coal technology.
文摘Dense-medium cyclones have been used for beneficiation of fine particles of coal. In this study, the usability of cyclones in the beneficiation of tailings of a coal preparation plant was investigated. For this purpose, separation tests were conducted using spiral concentrator and heavy medium cyclones with the specific weight of medium 1.3-1.8 （g/cm^3） on different grading fractions of tailing in an industrial scale （the weight of tail sample was five tons）. Spiral concentrator was utilized to beneficiate particles smaller than 1 mm. In order to evaluate the efficiency of cyclones, sink and float experiments using a specific weight of 1.3, 1.5, 1.7 and 1.9 g/cm^3, were conducted on a pilot scale. Based on the obtained results, the recovery of floated materials in cyclones with the specific weight of 1.40, 1.47 and 1.55 g/cm^3 are 17.75%, 33.80%, and 50%, respectively. Also, the cut point （Pso）, which is the relative density at which particles report equally to the both products are 1.40, 1.67 and 1.86 g/cm^3. The probable errors of separation for defined specific weights for cyclones are 0.080, 0.085 and 0.030, respectively. Also, the coefficients of variation was calculated to be 0.20, 0.12 and 0.03. Finally, it could be said that the performance of a cyclone with a heavy medium of 1.40 g/cm^3 specific weight is desirable compared with other specific weights.
基金provided by the National Natural Science Foundation of China (No. 70972098)
文摘Taking the city of Qitaihe is as an example in order to provide practical methods for the selection of leading industries for coal resource cities, this paper establishes the specific operation scheme for selection of leading industries according to the actual situation of coal resource cities based on the theory of coupling coordination together with the coupling coordination for technological innovation. The results show that the degree for coupling coordination of the technological innovation for each alternative industry differentiates with the development of coal resource cities. For example, the average degree of food processing industry from agricultural produce is 0.9. Therefore, coal resource cities should develop some industries related to coal industry, such as coking industry, some chemical and medicines industry and non-metallic mineral products manufacturing, in the near future, however, some industries with greater market and influence potentials and low carbon emissions should be attached much importance to in the future.
文摘Mathematical model is a powerful means of prediction, simulation and optimization of jig process. And it is also an important part in computer control system. Jig process is divided into two sub-processes, stratifying process serially followed by separating process. Taking stratifying process as state transition process of particles in step with jig work cycle, the mathematical model of stratifying is established with Markov chain theory; By analyzing the characteristics and float-sink data of jig, the mathematical model of separating process was submitted. The physical meaning of parameters of the models are explained; the relationship between model and partition was discussed. The fitting result was good with the model.
