The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on...The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on charged particles in discharge channel is calculated under the electromagnetic field with high frequency. Through the theoretical analysis and experimental study, the forming process of discharge channel is conjectured. And it is considered that the changes of discharge channel, such as the decrease of diameter and increase of energy density, coming from the intense magnetic pinch effect in high frequency electromagnetic field, are the main reasons for a series of special phenomena on the machined surface in micro EDM.展开更多
In oil and mineral exploration, gravity gradient tensor data include higher- frequency signals than gravity data, which can be used to delineate small-scale anomalies. However, full-tensor gradiometry （FTG） data are...In oil and mineral exploration, gravity gradient tensor data include higher- frequency signals than gravity data, which can be used to delineate small-scale anomalies. However, full-tensor gradiometry （FTG） data are contaminated by high-frequency random noise. The separation of noise from high-frequency signals is one of the most challenging tasks in processing of gravity gradient tensor data. We first derive the Cartesian equations of gravity gradient tensors under the constraint of the Laplace equation and the expression for the gravitational potential, and then we use the Cartesian equations to fit the measured gradient tensor data by using optimal linear inversion and remove the noise from the measured data. Based on model tests, we confirm that not only this method removes the high- frequency random noise but also enhances the weak anomaly signals masked by the noise. Compared with traditional low-pass filtering methods, this method avoids removing noise by sacrificing resolution. Finally, we apply our method to real gravity gradient tensor data acquired by Bell Geospace for the Vinton Dome at the Texas-Louisiana border.展开更多
Based on the minimum settling time （MST） theory and step-response analysis of the second order system in active switched capacitor （SC） networks, a novel clock feedthrough frequency compensation （CFFC） method fo...Based on the minimum settling time （MST） theory and step-response analysis of the second order system in active switched capacitor （SC） networks, a novel clock feedthrough frequency compensation （CFFC） method for a folded-cascode OTA is proposed. The damping factor r/is adjusted by using MOS capacitors to introduce clock feedthrough so that the OTA can obtain the MST state and thus achieve fast settling. Research results indicate that the settling time of the compensated OTA is reduced by 22.7% ;as the capacitor load varies from 0.5 to 2.5pF,the improved settling time increases approximately linearly from 3.62 to 4.46ns： for VGA application, fast settling can also be achieved by modifying the MOS capacitor value accordingly when the closed loop gain of the compensated OTA varies.展开更多
The insertion loss （IL） of a T-type attenuator is theoretically analyzed. A T-type RF （ radio frequency） CMOS （ complementary metal-oxide-semiconductor ） attenuator is designed as an on-off keying（OOK） modulat...The insertion loss （IL） of a T-type attenuator is theoretically analyzed. A T-type RF （ radio frequency） CMOS （ complementary metal-oxide-semiconductor ） attenuator is designed as an on-off keying（OOK） modulator in a time-hopping ultra wide-band （TH-UWB）communication with a carrier frequency of 4 GHz. In the topology of the OOK modulator circuit, there are three parts, an oscillator with an oscillating frequency of 4 GHz, a T-type attenuator constructed by RF CMOS transistors, and an output impedance matching network with a L-type LC structure. The modulator is controlled by a time-hopping pulse position modulation（TH-PPM） signal. The envelope of the modulated signal varies with the amplitude of the controlling signal. Meanwhile, an output matching network is also designed to match a 50 Ω load. In 0. 18 μm RF CMOS technology, a modulator is designed and simulated. The implemented modulator chip has 65 mV of the output amplitude at a 50 fl load from a 1.8 V supply, and the return loss （ S11 ） at the output port is less than - 10 dB. The chip size is 0. 7 mm × 0. 8 mm, and the power consumption is 12. 3 mW.展开更多
The performance analysis and simulation of coding schemes based on the modeling Ka band fixed satellite channel have been presented. The results indicate that concatenated codes with large inner interleaving depth ha...The performance analysis and simulation of coding schemes based on the modeling Ka band fixed satellite channel have been presented. The results indicate that concatenated codes with large inner interleaving depth have good performance and high spectrum efficiency. The studies also show that simple block interleaving is very effective in combating the slow frequency nonselective fading of Ka band.展开更多
An RF bandpass filter with a Q-enhancement active inductor is presented. The design technique for a tunable Q-enhancement CMOS active inductor operating in the wide RF-band is described. Moreover,issues related to noi...An RF bandpass filter with a Q-enhancement active inductor is presented. The design technique for a tunable Q-enhancement CMOS active inductor operating in the wide RF-band is described. Moreover,issues related to noise and stability of the active inductor are explained. The filter was fabricated in 0.18μm CMOS technolo- gy,and the circuit occupied an active area of only 150μm ×200μm. Measurement results show that the filter centered at 2. 44GHz with about 60MHz bandwidth （3dB） is tunable in center frequency from about 2.07 to 2. 44GHz. The ldB compression point is - 15dBm while consuming 10. 8mW of DC power,and a maximum quality factor of 103 is attained at the center frequency of 2.07GHz.展开更多
The performance of the graph-based scheduling for device-to-device communications overlaying cellular networks is studied. The graph-based scheduling consists of two stages, the frequency assignment stage and the time...The performance of the graph-based scheduling for device-to-device communications overlaying cellular networks is studied. The graph-based scheduling consists of two stages, the frequency assignment stage and the time slot scheduling stage. For such scheduling, a theoretical method to analyze the average spectrum efficiency of the D2D subsystem is proposed. The method consists of three steps. First, the frequency assignment stage is analyzed and the approximate formula of the average number of the D2D links which are assigned the same frequency is derived. Secondly, the time slot scheduling stage is analyzed and the approximate formula of the average probability of a D2D link being scheduled in a time slot is derived. Thirdly, the average spectrum efficiency of the D2D subsystem is analyzed and the corresponding approximate formula is derived. Analysis results show that the average spectrum efficiency of the D2D subsystem is approximately inversely linearly proportional to the second- order origin moment of the normalized broadcast radius of D2D links. Simulation results show that the proposed method can correctly predict the average spectrum efficiency of the D2D subsystem.展开更多
基金Supported by the National Natural Science Foundation of China(50635040)~~
文摘The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on charged particles in discharge channel is calculated under the electromagnetic field with high frequency. Through the theoretical analysis and experimental study, the forming process of discharge channel is conjectured. And it is considered that the changes of discharge channel, such as the decrease of diameter and increase of energy density, coming from the intense magnetic pinch effect in high frequency electromagnetic field, are the main reasons for a series of special phenomena on the machined surface in micro EDM.
基金financially supported by the SinoProbe-09-01(201011078)
文摘In oil and mineral exploration, gravity gradient tensor data include higher- frequency signals than gravity data, which can be used to delineate small-scale anomalies. However, full-tensor gradiometry （FTG） data are contaminated by high-frequency random noise. The separation of noise from high-frequency signals is one of the most challenging tasks in processing of gravity gradient tensor data. We first derive the Cartesian equations of gravity gradient tensors under the constraint of the Laplace equation and the expression for the gravitational potential, and then we use the Cartesian equations to fit the measured gradient tensor data by using optimal linear inversion and remove the noise from the measured data. Based on model tests, we confirm that not only this method removes the high- frequency random noise but also enhances the weak anomaly signals masked by the noise. Compared with traditional low-pass filtering methods, this method avoids removing noise by sacrificing resolution. Finally, we apply our method to real gravity gradient tensor data acquired by Bell Geospace for the Vinton Dome at the Texas-Louisiana border.
文摘Based on the minimum settling time （MST） theory and step-response analysis of the second order system in active switched capacitor （SC） networks, a novel clock feedthrough frequency compensation （CFFC） method for a folded-cascode OTA is proposed. The damping factor r/is adjusted by using MOS capacitors to introduce clock feedthrough so that the OTA can obtain the MST state and thus achieve fast settling. Research results indicate that the settling time of the compensated OTA is reduced by 22.7% ;as the capacitor load varies from 0.5 to 2.5pF,the improved settling time increases approximately linearly from 3.62 to 4.46ns： for VGA application, fast settling can also be achieved by modifying the MOS capacitor value accordingly when the closed loop gain of the compensated OTA varies.
文摘The insertion loss （IL） of a T-type attenuator is theoretically analyzed. A T-type RF （ radio frequency） CMOS （ complementary metal-oxide-semiconductor ） attenuator is designed as an on-off keying（OOK） modulator in a time-hopping ultra wide-band （TH-UWB）communication with a carrier frequency of 4 GHz. In the topology of the OOK modulator circuit, there are three parts, an oscillator with an oscillating frequency of 4 GHz, a T-type attenuator constructed by RF CMOS transistors, and an output impedance matching network with a L-type LC structure. The modulator is controlled by a time-hopping pulse position modulation（TH-PPM） signal. The envelope of the modulated signal varies with the amplitude of the controlling signal. Meanwhile, an output matching network is also designed to match a 50 Ω load. In 0. 18 μm RF CMOS technology, a modulator is designed and simulated. The implemented modulator chip has 65 mV of the output amplitude at a 50 fl load from a 1.8 V supply, and the return loss （ S11 ） at the output port is less than - 10 dB. The chip size is 0. 7 mm × 0. 8 mm, and the power consumption is 12. 3 mW.
文摘The performance analysis and simulation of coding schemes based on the modeling Ka band fixed satellite channel have been presented. The results indicate that concatenated codes with large inner interleaving depth have good performance and high spectrum efficiency. The studies also show that simple block interleaving is very effective in combating the slow frequency nonselective fading of Ka band.
文摘An RF bandpass filter with a Q-enhancement active inductor is presented. The design technique for a tunable Q-enhancement CMOS active inductor operating in the wide RF-band is described. Moreover,issues related to noise and stability of the active inductor are explained. The filter was fabricated in 0.18μm CMOS technolo- gy,and the circuit occupied an active area of only 150μm ×200μm. Measurement results show that the filter centered at 2. 44GHz with about 60MHz bandwidth （3dB） is tunable in center frequency from about 2.07 to 2. 44GHz. The ldB compression point is - 15dBm while consuming 10. 8mW of DC power,and a maximum quality factor of 103 is attained at the center frequency of 2.07GHz.
基金The National Natural Science Foundation of China(No.61571111)the National High Technology Research and Development Program of China(863 Program)(No.2014AA01A703,2015AA01A706)the Fundamental Research Funds for the Central Universities of China(No.2242016K40098)
文摘The performance of the graph-based scheduling for device-to-device communications overlaying cellular networks is studied. The graph-based scheduling consists of two stages, the frequency assignment stage and the time slot scheduling stage. For such scheduling, a theoretical method to analyze the average spectrum efficiency of the D2D subsystem is proposed. The method consists of three steps. First, the frequency assignment stage is analyzed and the approximate formula of the average number of the D2D links which are assigned the same frequency is derived. Secondly, the time slot scheduling stage is analyzed and the approximate formula of the average probability of a D2D link being scheduled in a time slot is derived. Thirdly, the average spectrum efficiency of the D2D subsystem is analyzed and the corresponding approximate formula is derived. Analysis results show that the average spectrum efficiency of the D2D subsystem is approximately inversely linearly proportional to the second- order origin moment of the normalized broadcast radius of D2D links. Simulation results show that the proposed method can correctly predict the average spectrum efficiency of the D2D subsystem.
