二阶振荡系统阶跃响应的最大速率研究

通过对二阶振荡系统单位阶跃响应的最大速率V_(max)及最大速度的研究,提出了速阻因子的概念及其工程速算式,解决了多年来随动系统没有快速设计方法的难题,并在某飞机的迎角传感器激励系统的设计中得到满意的证实。

Arrhenius relationship and two-step scheme in AF hyperdynamics simulation of diffusion of Mg/Zn interface

The accelerating factor （AF） method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics （HD） simulation, the relationship between the diffusion coefficient along the direction of z-axis which is normal to the Mg/Zn interface and temperature was investigated, and the AF＇s impact on the diffusion constant （D0） and activation energy （Q^＊） was studied. Then, two steps were taken to simulate the atomic diffusion process and the formation of new phases： one for acceleration and the other for equilibration. The results show that： the Arrhenius equation works well for the description of Dz with different accelerating factors; the AF has no effect on the diffusion constant Do in the case of no phase transition; and the relationship between Q＊ and Q conforms to Q^＊=Q/A. Then, the new Arrhenius equation for AFHD is successfully constructed as Dz=Doexp[-Q/（ART）]. Meanwhile, the authentic equilibrium conformations at any dynamic moment can only be reproduced by the equilibration simulation of the HD-simulated configurations. Key words： accelerating factor method; Arrhenius equation; two-steps scheme; Mg/Zn interface; hyperdynamic simulation

Effect of initial microstructure on hot workability of 7085 aluminum alloy

The hot workability of 7085 aluminum alloys with different initial microstructures （as-homogenized and as-solution treated） was studied by isothermal compression tests at the deformation temperature ranging from 300 to 450 ℃ and the strain rate ranging from 0.0001 to 1 s 1. The strain rate sensitivity of the alloy was evaluated and used for establishing the power dissipation maps and instability maps on the basis of the flow stress data. The results show that the efficiency of power dissipation for the as-homogenized alloy is lower than that of the as-solution treated alloy. The deformation parameters of the dynamic recrystallization for the as-homogenized and as-solution treated alloy occur at 400 ℃, 0.01 s i and 450 ℃, 0.001 s-1, respectively. The flow instability region of the as-homogenized alloy is narrower than that of the as-solution treated alloy. These differences of the alloys with two different initial microstructures on the processing maps are mainly related to the dynamic precipitation characteristics.

Seismic wave propagation in Kelvin visco-elastic VTI media

In this article,under the assumption of weak anisotropy and weak attenuation, we present approximate solutions of anisotropic complex velocities and quality-factors for Kelvin visco-elastic transverse isotropy（KEL-VTI） media,based on the complex physical parameter matrix.Also,combined with the KEL-VTI media model,the propagation characteristics of the qP-,qS V-,and qSH-wave phases and energies are discussed.Further, we build a typical KEL-VTI media model of the Huainan coal mine to model the wave propagation.The numerical simulation results show that the PP- and PSV-wave theoretical wave-fields are close to the wave-fields of three-component P- and converted-waves acquired in the work area.This result proves that the KEL-VTI media model gives a good approximation to this typical coalfield seismic-geologic conditions and is helpful to the study of attenuation compensation of multi-component seismic data.

Study on the Daily Change of Photosynthetic Rate for Prunus domestica × armeniacain Different Seasons

[Objective] The aim of this study was to explore the daily change of photosyntheticratefor Prunus domestica ×armeniacain different growing seasons. The study can provide theoretical basis for arid area high yield and quality cultivation.[Method] The photosynthetic physiological properties of leaves of different types of Prunus domestica × armeniaca were measured by the Li-6400 portable photosynthesis system indifferent seasons. By this method could analysis of photosyntheticcharacteristicsfor different types of Prunus domestica×armeniaca in different seasons.[Result] Daily change of photosyntheticrate（Pn） for Prunus domestica×armeniaca in differentseasons showed a ＂double-peak＂ curve. The peak values were at 10：00 and16：00. The Pn of ‘Fengweihuanghou＇, ‘Konglongdan＇, ‘Weihou＇, ‘Weiwang＇ and‘Weidi＇ reached the maximum in July, theywere 13.75, 14.76, 12.96, 13.3, and 11.9μmol/（m^2·s）, respectively. The Pn of Prunus domestica×armeniaca reached minimumin August, they were 9.78, 10.71, 12.02, 10.43 μmol/（m^2·s）. The Pn overall average of ‘Konglongdan＇ was highest,it reached 12.65 μmol/（m^2·s）.The Pn overall average of ‘Weiwang＇ was lowest, it reached 11.31μmol/（m^2·s）. There were extremely significant positive correlation between the Pn and Gs（P0.01）. [Conclusion] Daily change of photosyntheticrate for Prunus domestica ×armeniaca in differentseasons showed a ＂double-peak＂ curve, showing significant phenomenon of ＂midday depression＂.The photosynthesis intensity of Prunus domestica ×armeniaca was strongest in July, and the photosynthesis intensity was weakest in August. ‘Konglongdan＇showed the strongest photosynthesis capacity, ‘Weihou＇ and ‘Weiwang＇, followed.There were highest correlation between the Pn and stoma conductance（Gs）.

Quench sensitivity of 6351 aluminum alloy

The quench sensitivity of 6351 alloy was determined by the time temperature-transformation（TTT） curves and time temperature-property（TTP） curves by an interrupted quench technique with measurement of as-aged hardness and as-quenched electro-conductivity.The microstructure transformation during isothermal treatment was studied by the transmission electron microscopy（TEM） and Avrami equation.The results showed that the electro-conductivity of the 6351 alloy increased and the hardness decreased with prolonging the holding time at a certain isothermal temperature.The TEM observation indicated that the supersaturated solid solution decomposed and needles β″ precipitated at the initial stage of isothermal holding.With the prolongation of holding time at the nose temperature,rod β＇ and plate β phases formed.The isothermal transformation rate at 360℃ was the fastest,and became slow at 280℃ and reached the slowest at 440℃.The nose temperatures of the TTT and TTP curves were about 360℃ and the high quench sensitive temperature range was 230 430℃.The quench factor analysis indicated that the cooling rate should be more than 15℃/s in the quench sensitive areas in order to get optimal mechanical properties.

Seismic dynamic monitoring in CO_2 flooding based on characterization of frequency-dependent velocity factor

The phase velocity of seismic waves varies with the propagation frequency, and thus frequency-dependent phenomena appear when CO2 gas is injected into a reservoir. By dynamically considering these phenomena with reservoir conditions it is thus feasible to extract the frequency-dependent velocity factor with the aim of monitoring changes in the reservoir both before and after CO2 injection. In the paper, we derive a quantitative expression for the frequency-dependent factor based on the Robinson seismic convolution model. In addition, an inversion equation with a frequency-dependent velocity factor is constructed, and a procedure is implemented using the following four processing steps： decomposition of the spectrum by generalized S transform, wavelet extraction of cross-well seismic traces, spectrum equalization processing, and an extraction method for frequency-dependent velocity factor based on the damped least-square algorithm. An attenuation layered model is then established based on changes in the Q value of the viscoelastic medium, and spectra of migration profiles from forward modeling are obtained and analyzed. Frequency-dependent factors are extracted and compared, and the effectiveness of the method is then verified using a synthetic data. The frequency-dependent velocity factor is finally applied to target processing and oil displacement monitoring based on real seismic data obtained before and after CO2 injection in the G89 well block within Shengli oilfield. Profiles and slices of the frequency-dependent factor determine its ability to indicate differences in CO2 flooding, and the predicting results are highly consistent with those of practical investigations within the well block.

Dynamic caustics experimental study on interaction between propagating crack and deformity inclusions in primary structure

The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadruple inclusion and triangular inclusion） under lowvelocity impact loading. By recording the caustic spots of crack tips at different moments during the crack propagation, the variation regulations of dynamic stress intensity factors（ DSIF） and crack growth velocity with respect to time are obtained. The experimental results showthat the resistance effects to crack growth are varied with different shapes of inclusions in specimens, and the quadruple inclusion＇s effect is more apparent. The distortion degree of caustic spots is affected by the shapes of inclusions as well, and the situation is more serious for cylinder and quadruple inclusions. The overall values of DSIFs of triangular inclusion specimen are greater than the others, and the crack growth velocities, characteristic sizes and DSIFs showprocesses of fluctuations because of the disturbance of reflection waves in specimens. The results provide an experimental basis for the analysis of strength and impact-resistance ability in structures with deformity inclusions.

Experimental study on dynamic fracture behavior of three-point bending beam with double deformity inclusions

The dynamic fracture behavior of the three-point bending beam with double deformity inclusions under impact loading is studied by using digital high-speed photography in combination with the transmission-type dynamic caustic method. The experimental results indicate that the fluctuation of crack propagation velocity v first increases and then decreases in the crack propagation process. During the process of crack propagating into the inclusion area, the fracture resistance effect of the circular inclusion is the most significant and the effects of triangular and square inclusions are less obvious. The stress intensity factor near the crack tip increases during the propagation process and reaches its maximum value when the crack tip is close to the inclusions. The crack tip’s dynamic stress intensity factor （ DSIF） decreases when the crack exceeds the middle area of the double inclusions. These results provide an experimental basis and scientific foundation to strengthen the evaluation and fracture analysis of the structure containing deformity inclusions.

关于船舶绕射增阻计算方法的评注

近年来,全球气候变暖问题日趋严重,船舶的温室气体排放开始受到航运业的关注,新船能效设计指数(EEDI)并其来计算船舶的二氧化碳排放。主要研究近两年国际海事组织(IMO)海上环境保护委员会(MEPC)所关注的海洋气象因子fw。船舶的波浪增阻是计算影响因子fw时必需的一项重要参数。针对fn计算公式中船舶在零航速时波浪绕射增阻的计算方法进行研究,根据三维势流理论计算了简化船模、集装箱船及油船模型的波浪漂移力,并将计算得到的数值结果与日本专家提出的方法计算结果进行对比,发现了其中存在的一些问题并就这些问题做了分析和总结。目前fw的计算方法仍在研究中,研究成果对于该计算方法的完善有一定的参考价值。

A Simple and Rapid Method to Determine the CO_2/O_2 Specificity Factor for Rubisco

A simple and rapid new method is presented to determine the CO 2/O 2 specificity factor for ribulose_1,5_bisphosphate(RuBP) carboxylase/oxygenase (Rubisco). In principle, the quantitative formula, which intrinsically resulted in error or enormous error in all reported methods, was improved to circumvent the problem. In practice, the complicated procedure with radiolabelling and chromatographic separation of 3_phosphoglycerate and 2_phosphoglycolate was substituted by one_step procedure without radiolabelling and chromatographic separation to decrease the random error. The effects of pH, temperature and ionic strength on accuracy of the data and the reliability of the calculation of the CO 2/O 2 specificity factor are also discussed.

汽油机工作过程的数值模拟

本文根据Benson等人提出的汽油机燃烧模型 ,考虑了燃烧室挤气面积对火焰传播速度的影响 ,对汽油机工作过程进行了数值模拟 ,并结合EQ610 0发动机实测数据找出了紊流火焰传播速度因子与发动机转速的关系。实验表明模拟结果是合理的 ,建立的汽油机燃烧过程模拟是可行的。

Path Analysis on the Meteorological Factors Impacting Soil Respiration Rate of Wheat Field

[Objective]The experiment aimed to study the effects of meteorological factors under different weather conditions on soil respiration. [ Method] The path analysis was used to analyze meteorological factors which influenced soil respiration of wheat field under different weather condition and at jointing stage. [ Result] In sunny day, the correlations between ground temperature at 5 cm, solar radiation, air relative humidity, air temperature and soil respiration were all at significant level while solar radiation and ground temperature at 5 cm were the major factors which influenced soil respiration. In cloudy day, solar radiation was a major factor which influenced soil respiration.[ Conclusion] The soil respiration and surplus path coefficient in sunny day were all higher than these in cloudy day, which demonstrated that except influenced by ground temperature, air temperature, solar radiation and air relative humidity, the soil respiration was also influenced by other factors especially biological factor.

Experimental and Theoretical Studies of CO2 Absorption Enhancement by Nano-Al203 and Carbon Nanotube Particles

The influence of nano-particles on CO2 absorption was studied experimentally in a stirred thermostatic reactor. Nano-A1203 and carbon nanotube （CNT） particles which showed different hydrophobic properties were chosen for the investigation. The experimental results were compared with that of micron-size activated carbon （AC） and Al2O3 particles. From the results, no enhancement by micron-size A1203 was found, and with the increase of A1203 concentration, the enhancement factor decreased. However, nano-Al203 showed a weak enlaancement tor me COz absorption. AC and CNT particles all intensified the gas-liquid mass transfer effectively, yet the trend of the enhancement factor with stirring speed for the two particles was different. With increasing stirring speed, the enhancement factor of AC particles was decreased, wl＇iereas in CNT suspensions it was increased. The experimental phenomena demonstrated a difference in enhancement mechanism for different size particles. For nano-particles, besides the influence of adsorbability and hydrophobicity, the micro-convection caused by Brownian motion should be also taken into account. Considering the micro-convection effect, a theoretical model was developed to shed light on the absorption enhancement bv nano-oarticles.

Macrophage inflammatory protein-2 contributes to liver resection-induced acceleration of hepatic metastatic tumor growth

AIM： To study the role of macrophage inflammatory protein （HIP）-2 in liver resection-induced acceleration of tumor growth in a mouse model of hepatic metastasis. METHODS： After a 50% hepatectomy, 1×10^5 CT26.WT cells were implanted into the left liver lobe of syngeneic balb/c mice （PHx）. Additional animals were treated with a monoclonal antibody （HAB452） neutralizing HIP-2 （PHx＋mAB）. Non-resected and non-mAB-treated mice （Con） served as controls. After 7 d, tumor angiogenesis and microcirculation as well as cell proliferation, tumor growth, and CXCR-2 expression were analyzed using in- travital fluorescence microscopy, histology, immunohisto- chemistry, and flow cytometry. RESULTS： Partial hepatectomy increased （P〈0.05）the expression of the HIP-2 receptor CXCR-2 on tumor cells when compared with non-resected controls, and markedly accelerated （P〈 0.05） angiogenesis and metastatic tumor growth. Neutralization of HIP-2 by HAB452 treatment significantly （P〈 0.05） depressed CXCR-2 expression. Further, the blockade of MIP-2 reduced the angiogenic response （P〈 0.05） and inhibited tumor growth （P〈 0.05）. Of interest, liver resection-induced hepatocyte proliferation was not effected by anti-HIP-2 treatment. CONCLUSION： HIP-2 significantly contributes to liver resection-induced acceleration of colorectal CT26.WT hepatic metastasis growth.

Effect of stress ratio on fatigue lifetime and crack growth behavior of WC-Co cemented carbide

Two types of fatigue tests, a rotating bending fatigue test and a three- or four-point bending fatigue test, were carried out on a fine grained WC-Co cemented carbide to evaluate its fatigue crack growth behavior and fatigue lifetime. From successive observations of the specimen surface during the fatigue process, it was revealed that most of the fatigue lifetime of the tested WC-Co cemented carbide was occupied with crack growth cycles. Using the basic equation of fracture mechanics, the relationship between the fatigue crack growth rate(da/dN) and the maximum stress intensity factor(Kmax) was derived. From this relation, both the values of the threshold intensity factor(Kth) and the fatigue fracture toughness(Kfc) of the material were determined. The fatigue lifetime of the WC-Co cemented carbide was estimated by analysis based on the modified linear elastic fracture mechanics approach. Good agreement between the estimated and experimental fatigue lifetimes was confirmed.

Measuring speed consistency for freeway diverge areas using factor analysis

Although either absolute speed or speed difference can be considered as a measure for speed consistency, few researches consider both in practice. The factor analysis method was introduced to extract an optimal number of factors from numerous original measures. The freeway diverging zone was divided into four elements, namely the upstream, the diverge area, the downstream and the exit ramp. Operating speeds together with individual vehicle speeds were collected at each element with radar guns. Following the factor analysis procedure, two factors, which explain 96.722% of the variance in the original data, were retained from the initial seven speed measures. According to the loadings after Varimax rotation, the two factors are clearly classified into two categories. The first category is named "speed scale" reflecting the absolute speed, and the other one is named "speed dispersion" interpreting speed discreteness. Then, the weighted score of speed consistency for each diverge area is given in terms of linear combination of the two retained factors. To facilitate the level classification of speed consistency, the weighted scores are normalized in the range of (0, 1.0). The criterion for speed consistency classification is given as 0≤F N <0.30, good consistency; 0.30≤F N <0.60, fair consistency; 0.60≤ F N ≤1.00, poor consistency. The validation by comparing with previously developed measures shows that the proposed measure is acceptable in evaluating speed consistency.

Numerical Derivation of Strain Rate Effects on Material Properties of Masonry with Solid Clay Bricks

In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume element （RVE）. Nudistinctive modeling of brick and mortar with their respective dynamic material properties obtained from laboratory tests. The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressuredependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor （DIF） of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.

Mitral peak early diastolic filling velocity to deceleration time ratio as a predictor of prognosis in patients with chronic heart failure and preserved or reduced ejection fraction

Objective Doppler derived mitral peak early diastolic filling velocity to deceleration time ratio （E/DT） has been proposed as parameter for predicting prognosis in general population. This study prospectively investigates the incremental prognostic value of E/DT over clinical, conven- tional eehocardiographic and mitral-Doppler variables in patients hospitalized for decompensated heart failure （HF）. Methods We analyzed 95 HF patients （mean age 64.8 ± 12.2 years） hospitalized at our institution from January 2010 to March 2012. The primary end-point was cardiac death or hospitalization, whichever occurred first. Cox regression analysis was performed to identify significant predictors of outcomes. Results During follow-up （median 37.7 months） 13 patients died and 44 were hospitalized for a cardiac event. At univariable analysis, New York Heart Association （NYHA） functional class, furosemide dosage, lateral tricuspidal annular plane systolic excursion, deceleration lime and E/DT were predictive of outcome. At multivariable analysis, E/DT was the only predictor of prognosis （hazard ratio = 1.02, P = 0.018）, giving incremental prognostic information to clinical and other echocardio-graphic measures （global chi-square from 15.4 to 25.2; P = 0.032）. Conclusions FJDT gives independent and incremental prognostic information in HF patients.

Acceleration Factors in the Improvement of Public Welfare Sangiran

Efforts to preserve the cultural heritage are manifestation to represent the work of the ancestors of the past so that people can now take advantage of in accordance with destining. There are at least four major aspects of a cultural heritage can be appreciated to the public, as art, as an economic resource （for tourism and improve the welfare of the people in the region）, as a source of information as knowledge and social fulfillment. This study aims to determine： （1） acceleration factors in the improvement of social welfare Sangiran; and （2） modernization of infrastructure and the role of maximum revenue acceleration in accelerating improvements in public welfare in the Sangiran with the integrated approach of the factors increasing human development, community empowerment, provision of credit banking and employment opportunities. This research is a survey of the Sangiran area using data collection methods of documentation, interviews, and questionnaires. The population in this study is people in the Sangiran region, Central Java. This study uses cluster sampling with sampling. Cluster sampling is a probability sampling extracted by certain groups with similar characteristics. In this study, samples were grouped according to the residence of respondents. The sample used in this study was 500 respondents. The analysis technique used is structural equation modeling （SEM）. The results of this study show that： （1） the factors of human development, community empowerment, access to bank credit and employment opportunities to accelerate the improvement of social welfare in the Sangiran area; and （2） the acceleration of the increase in welfare Sangiran region can be achieved by an integrated approach of the factors increasing human development, community empowerment, bank lending and increase employment opportunities through increased infrastructure modernization and maximum income.