Forecasts and simulations are varied owing to different allocation of 3-dimensional variables in mesoscale models. No attempts have been made to address the issue of optimizing the simulation with a 3-dimensional vari...Forecasts and simulations are varied owing to different allocation of 3-dimensional variables in mesoscale models. No attempts have been made to address the issue of optimizing the simulation with a 3-dimensional variables distribution that should come to be. On the basis of linear nonhydrostatic anelastic equations, the paper hereby compares, mainly graphically, the computational dispersion with analytical solutions for four kinds of 3-dimensional meshes commonly found in mesoscale models, in terms of frequency, horizontal and vertical group velocities. The result indicates that the 3-D mesh C/CP has the best computational dispersion, followed by Z/LZ and Z/LY, with the C/L having the worst performance. It is then known that the C/CP mesh is the most desirable allocation in the design of nonhydrostatic baroclinic models. The mesh has, however, larger errors when dealing with shorter horizontal wavelengths. For the simulation of smaller horizontal scales, the horizontal grid intervals have to be shortened to reduce the errors. Additionally, in view of the dominant use of C/CP mesh in finite-difference models, it should be used in conjunction with the Z/LZ or Z/LY mesh if variables are allocated in spectral models.展开更多
Based on the experimental results, a simplified model for low-voltage powerline used as a high frequency communication channel is presented. With this model, the Orthogonal Frequency Division Multiplexing (OFDM) based...Based on the experimental results, a simplified model for low-voltage powerline used as a high frequency communication channel is presented. With this model, the Orthogonal Frequency Division Multiplexing (OFDM) based high rate digital communication over low-voltage powerline is analyzed and simulated. The capability of the signal transmission system in overcoming multi-path interference and selection of the system parameters are discussed. And time-domain simulation is carried out to investigate the transmission capability of the OFDM communication system for different mapping schemes and transmission power levels. Simulation results show that it is possible to realize high rate digital communication over low-voltage powerline using OFDM when the transmitted power is large enough.展开更多
In this work, a new mathematical modelling of drying kinetics is described. At first, the modelling of the transfer speed （St） of water was performed. Then St was used as basis to state the drying rate model. The dr...In this work, a new mathematical modelling of drying kinetics is described. At first, the modelling of the transfer speed （St） of water was performed. Then St was used as basis to state the drying rate model. The drying rate depends not only on drying time, but also on some modelling parameters which are themselves time-dependent. All the modelling parameters are calculated directly from the experimental drying data. Then the theoretical model of the moisture content was stated. Subsequently, the drying kinetics of natural solar drying of plantain banana was studied as illustration. The drying rate was investigated. The comparison with other models encountered in literatures proved that the current theoretical model was decidedly more accurate. Then the modelling of moisture content of banana was performed and the results were compared with the Henderson and Pabis model. The current theoretical modelling provided by far the best fit.展开更多
A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum-domain experimen...A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum-domain experiments to obtain the dynamic range of the F-P sensor, and a piezoelectric crystal unit (PZT) was used as the driver. The output signal was modulated by a piezoelectric ceramic ring and demodulated by a phase-locked oscillator. The experimental results show that the displacement resolution of the F-P sensor is less than 5 nm and the dynamic range is more than 100 μm. As acceleration is the second-order differential of displacement, an accelerometer model was proposed using the finite element method (FEM) nd ANSYS software.展开更多
基金Supported by the open research program of LASG Institute of Atmospheric Physics Chinese Academy of Sciences
文摘Forecasts and simulations are varied owing to different allocation of 3-dimensional variables in mesoscale models. No attempts have been made to address the issue of optimizing the simulation with a 3-dimensional variables distribution that should come to be. On the basis of linear nonhydrostatic anelastic equations, the paper hereby compares, mainly graphically, the computational dispersion with analytical solutions for four kinds of 3-dimensional meshes commonly found in mesoscale models, in terms of frequency, horizontal and vertical group velocities. The result indicates that the 3-D mesh C/CP has the best computational dispersion, followed by Z/LZ and Z/LY, with the C/L having the worst performance. It is then known that the C/CP mesh is the most desirable allocation in the design of nonhydrostatic baroclinic models. The mesh has, however, larger errors when dealing with shorter horizontal wavelengths. For the simulation of smaller horizontal scales, the horizontal grid intervals have to be shortened to reduce the errors. Additionally, in view of the dominant use of C/CP mesh in finite-difference models, it should be used in conjunction with the Z/LZ or Z/LY mesh if variables are allocated in spectral models.
文摘Based on the experimental results, a simplified model for low-voltage powerline used as a high frequency communication channel is presented. With this model, the Orthogonal Frequency Division Multiplexing (OFDM) based high rate digital communication over low-voltage powerline is analyzed and simulated. The capability of the signal transmission system in overcoming multi-path interference and selection of the system parameters are discussed. And time-domain simulation is carried out to investigate the transmission capability of the OFDM communication system for different mapping schemes and transmission power levels. Simulation results show that it is possible to realize high rate digital communication over low-voltage powerline using OFDM when the transmitted power is large enough.
文摘In this work, a new mathematical modelling of drying kinetics is described. At first, the modelling of the transfer speed （St） of water was performed. Then St was used as basis to state the drying rate model. The drying rate depends not only on drying time, but also on some modelling parameters which are themselves time-dependent. All the modelling parameters are calculated directly from the experimental drying data. Then the theoretical model of the moisture content was stated. Subsequently, the drying kinetics of natural solar drying of plantain banana was studied as illustration. The drying rate was investigated. The comparison with other models encountered in literatures proved that the current theoretical model was decidedly more accurate. Then the modelling of moisture content of banana was performed and the results were compared with the Henderson and Pabis model. The current theoretical modelling provided by far the best fit.
基金Project (No. 111303-8112D2) supported by the National DefenseResearch Foundation of Zhejiang University, China
文摘A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum-domain experiments to obtain the dynamic range of the F-P sensor, and a piezoelectric crystal unit (PZT) was used as the driver. The output signal was modulated by a piezoelectric ceramic ring and demodulated by a phase-locked oscillator. The experimental results show that the displacement resolution of the F-P sensor is less than 5 nm and the dynamic range is more than 100 μm. As acceleration is the second-order differential of displacement, an accelerometer model was proposed using the finite element method (FEM) nd ANSYS software.
