The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou b...The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures. The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km- 18.8km, and that of the lower crust is 12.0km- 13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km- 31 .8km There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4kin, the maximum depth is about 5km. Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.展开更多
为了最大程度地利用资源和减小电磁干扰,无人机平台的雷达通信一体化设计有着尤为重要的意义。正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)信号具有较高的频谱利用率、较强的抗干扰性能、易于数字化处理等优点,在...为了最大程度地利用资源和减小电磁干扰,无人机平台的雷达通信一体化设计有着尤为重要的意义。正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)信号具有较高的频谱利用率、较强的抗干扰性能、易于数字化处理等优点,在雷达通信一体化系统备受关注。然而,OFDM信号在雷达和通信系统中对多普勒频偏较为敏感,针对多普勒频偏引起的子载波间干扰(Inter-Carrier Interference,ICI)问题,本文设计出一种RS-OFDM雷达通信一体化信号,并提出一种ICI抑制的信号处理算法,其中基于多普勒估计和校正实现OFDM的无ICI处理。仿真结果表明:所提方法在目标成像性能上优于传统方法,且对多普勒频偏具有较强的鲁棒性,而且并无明显增加计算复杂度。展开更多
Seismic wave velocity is one of the most important processing parameters of seismic data,which also determines the accuracy of imaging.The conventional method of velocity analysis involves scanning through a series of...Seismic wave velocity is one of the most important processing parameters of seismic data,which also determines the accuracy of imaging.The conventional method of velocity analysis involves scanning through a series of equal intervals of velocity,producing the velocity spectrum by superposing energy or similarity coefficients.In this method,however,the sensitivity of the semblance spectrum to change of velocity is weak,so the resolution is poor.In this paper,to solve the above deficiencies of conventional velocity analysis,a method for obtaining a high-resolution velocity spectrum based on weighted similarity is proposed.By introducing two weighting functions,the resolution of the similarity spectrum in time and velocity is improved.Numerical examples and real seismic data indicate that the proposed method provides a velocity spectrum with higher resolution than conventional methods and can separate cross reflectors which are aliased in conventional semblance spectrums;at the same time,the method shows good noise-resistibility.展开更多
Full waveform inversion size of full waveform inversion will and the limitation of full waveform is mainly used to obtain high resolution velocity models of subsurface. The lead to a gigantic computation cost. Under t...Full waveform inversion size of full waveform inversion will and the limitation of full waveform is mainly used to obtain high resolution velocity models of subsurface. The lead to a gigantic computation cost. Under the available computer resource inversion, the authors propose L-BFGS algorithm as the optimization method to solve this problem. In order to demonstrate the flexibility of the method, three different numerical experi- ments have been done to analyze the properties of full waveform inversion based on L-BFGS.展开更多
For solving complex flow field with multi-scale structure higher order accurate schemes are preferred. Among high order schemes the compact schemes have higher resolving efficiency. When the compact and upwind compact...For solving complex flow field with multi-scale structure higher order accurate schemes are preferred. Among high order schemes the compact schemes have higher resolving efficiency. When the compact and upwind compact schemes are used to solve aerodynamic problems there are numerical oscillations near the shocks. The reason of oscillation production is because of non-uniform group velocity of wave packets in numerical solutions. For improvement of resolution of the shock a parameter function is introduced in compact scheme to control the group velocity. The newly developed method is simple. It has higher accuracy and less stencil of grid points.展开更多
Due to the low sound propagation speed, the tradeoff between high azimuth resolution and wide imaging swath has severely limited the application of sonar underwater target imaging. However, based on compressed sensing...Due to the low sound propagation speed, the tradeoff between high azimuth resolution and wide imaging swath has severely limited the application of sonar underwater target imaging. However, based on compressed sensing(CS) technique, it is feasible to image targets with merely one pulse and thus avoid the above tradeoff. To investigate the possible waveforms for CS-based underwater imaging, the deterministic M sequences widely used in sonar applications are introduced in this paper. By analyzing the compressive matrix constructed from M sequences, the coherence parameter and the restricted isometry property(RIP) of the matrix are derived. Also, the feasibility and advances of M sequence are demonstrated by being compared with the existing Alltop sequence in underwater CS imaging framework. Finally, the results of numerical simulations and a real experiment are provided to reveal the effectiveness of the proposed signal.展开更多
基金This research was funded by the 10th Five-Year KeyProject of Fujian Province ,entitled"Exploration of active fault and seismic risk evaluationin cities in Fujian province"
文摘The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures. The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km- 18.8km, and that of the lower crust is 12.0km- 13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km- 31 .8km There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4kin, the maximum depth is about 5km. Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.
文摘为了最大程度地利用资源和减小电磁干扰,无人机平台的雷达通信一体化设计有着尤为重要的意义。正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)信号具有较高的频谱利用率、较强的抗干扰性能、易于数字化处理等优点,在雷达通信一体化系统备受关注。然而,OFDM信号在雷达和通信系统中对多普勒频偏较为敏感,针对多普勒频偏引起的子载波间干扰(Inter-Carrier Interference,ICI)问题,本文设计出一种RS-OFDM雷达通信一体化信号,并提出一种ICI抑制的信号处理算法,其中基于多普勒估计和校正实现OFDM的无ICI处理。仿真结果表明:所提方法在目标成像性能上优于传统方法,且对多普勒频偏具有较强的鲁棒性,而且并无明显增加计算复杂度。
基金funded by the National Key Research and Development Plan (No. 2017YFB0202905)China Petroleum Corporation Technology Management Department “Deep-ultra-deep weak signal enhancement technology based on seismic physical simulation experiments”(No. 2017-5307073-000008-01)。
文摘Seismic wave velocity is one of the most important processing parameters of seismic data,which also determines the accuracy of imaging.The conventional method of velocity analysis involves scanning through a series of equal intervals of velocity,producing the velocity spectrum by superposing energy or similarity coefficients.In this method,however,the sensitivity of the semblance spectrum to change of velocity is weak,so the resolution is poor.In this paper,to solve the above deficiencies of conventional velocity analysis,a method for obtaining a high-resolution velocity spectrum based on weighted similarity is proposed.By introducing two weighting functions,the resolution of the similarity spectrum in time and velocity is improved.Numerical examples and real seismic data indicate that the proposed method provides a velocity spectrum with higher resolution than conventional methods and can separate cross reflectors which are aliased in conventional semblance spectrums;at the same time,the method shows good noise-resistibility.
文摘Full waveform inversion size of full waveform inversion will and the limitation of full waveform is mainly used to obtain high resolution velocity models of subsurface. The lead to a gigantic computation cost. Under the available computer resource inversion, the authors propose L-BFGS algorithm as the optimization method to solve this problem. In order to demonstrate the flexibility of the method, three different numerical experi- ments have been done to analyze the properties of full waveform inversion based on L-BFGS.
基金the computers of the State Kay Laboratory of Scientific and Engineering Computing, the Chinese Academy of Sciences This work was supporded by the National Natural Science Foundation of China (Grant No. 19972070) "95" Project and 973 Project (Grant N
文摘For solving complex flow field with multi-scale structure higher order accurate schemes are preferred. Among high order schemes the compact schemes have higher resolving efficiency. When the compact and upwind compact schemes are used to solve aerodynamic problems there are numerical oscillations near the shocks. The reason of oscillation production is because of non-uniform group velocity of wave packets in numerical solutions. For improvement of resolution of the shock a parameter function is introduced in compact scheme to control the group velocity. The newly developed method is simple. It has higher accuracy and less stencil of grid points.
基金supported in part by National Natural Science Foundation of China (Grant No. 61271391)111 Project of China Ministry of Education (MOE) (Grant No. B14010)+2 种基金New Century Excellent Talents Supporting Plan of China MOE (Grant No. NCET-13-0049)Ministry Research Foundation (Grant No. 9140A21050114HT05338)Outstanding Youth Teacher Training Plan of BIT (Grant No. BIT-JC-201205)
文摘Due to the low sound propagation speed, the tradeoff between high azimuth resolution and wide imaging swath has severely limited the application of sonar underwater target imaging. However, based on compressed sensing(CS) technique, it is feasible to image targets with merely one pulse and thus avoid the above tradeoff. To investigate the possible waveforms for CS-based underwater imaging, the deterministic M sequences widely used in sonar applications are introduced in this paper. By analyzing the compressive matrix constructed from M sequences, the coherence parameter and the restricted isometry property(RIP) of the matrix are derived. Also, the feasibility and advances of M sequence are demonstrated by being compared with the existing Alltop sequence in underwater CS imaging framework. Finally, the results of numerical simulations and a real experiment are provided to reveal the effectiveness of the proposed signal.
