The molecular dynamics(MD)model ofα-Al_(2)O_(3) nanowires in bending is established by using LAMMPS to calculate the atomic stress and strain at different loading rates in order to study the effect of loading rate on...The molecular dynamics(MD)model ofα-Al_(2)O_(3) nanowires in bending is established by using LAMMPS to calculate the atomic stress and strain at different loading rates in order to study the effect of loading rate on the bending mechanical behaviors of theα-Al_(2)O_(3) nanowires.Research results show that the maximum surface stress−rotation angle curves ofα-Al_(2)O_(3) nanowires at different loading rates are all divided into three stages of elastic deformation,plastic deformation and failure,where the elastic limit point can be determined by the curve symmetry during loading and unloading cycle.The loading rate has great influence on the plastic deformation but little on the elastic modulus ofα-Al_(2)O_(3) nanowires.When the loading rate is increased,the plastic deformation stage is shortened and the material is easier to fail in brittle fracture.Therefore,the elastic limit and the strength limit(determined by the direct and indirect MD simulation methods)are closer to each other.The MD simulation result ofα-Al_(2)O_(3) nanowires is verified to be valid by the good agreement with the improved loop test results.The direct MD method becomes an effective way to determine the elastic limit and the strength limit of nanoscale whiskers failed in brittle or ductile fracture at arbitrary loading rate.展开更多
The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on ...The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on the evolution of normal stress and effective stress inside and outside groove was also analyzed.The results show that when linear loading path changes from uniaxial tension to equi-biaxial tension,the initial groove angle plays a weaker role in the evolution of strain rate in the M-K model.Due to the constraint of force equilibrium between inside and outside groove,the strain rate difference makes the normal stress inside groove firstly decrease and then increase during calculation,which makes the prediction algorithm of forming limit convergent at elevated temperature.The decrease of normal stress inside groove is mainly caused by high temperature softening effect and the rotation of groove,while the increase of normal stress inside groove is mainly due to strain rate hardening effect.展开更多
In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume...In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume element （RVE）. Nudistinctive modeling of brick and mortar with their respective dynamic material properties obtained from laboratory tests. The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressuredependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor （DIF） of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.展开更多
基金the National Natural Science Foundation of China(No.12162010)the Science Technology Base and Talent Special Project of Guangxi,China(No.AD19245143)Natural Science Foundation of Guangxi,China(No.2021GXNSFAA220087).
文摘The molecular dynamics(MD)model ofα-Al_(2)O_(3) nanowires in bending is established by using LAMMPS to calculate the atomic stress and strain at different loading rates in order to study the effect of loading rate on the bending mechanical behaviors of theα-Al_(2)O_(3) nanowires.Research results show that the maximum surface stress−rotation angle curves ofα-Al_(2)O_(3) nanowires at different loading rates are all divided into three stages of elastic deformation,plastic deformation and failure,where the elastic limit point can be determined by the curve symmetry during loading and unloading cycle.The loading rate has great influence on the plastic deformation but little on the elastic modulus ofα-Al_(2)O_(3) nanowires.When the loading rate is increased,the plastic deformation stage is shortened and the material is easier to fail in brittle fracture.Therefore,the elastic limit and the strength limit(determined by the direct and indirect MD simulation methods)are closer to each other.The MD simulation result ofα-Al_(2)O_(3) nanowires is verified to be valid by the good agreement with the improved loop test results.The direct MD method becomes an effective way to determine the elastic limit and the strength limit of nanoscale whiskers failed in brittle or ductile fracture at arbitrary loading rate.
基金Project(51775023)supported by the National Natural Science Foundation of ChinaProject(YWF-18-BJ-J-75)supported by the Fundamental Research Funds for the Central Universities,China
文摘The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on the evolution of normal stress and effective stress inside and outside groove was also analyzed.The results show that when linear loading path changes from uniaxial tension to equi-biaxial tension,the initial groove angle plays a weaker role in the evolution of strain rate in the M-K model.Due to the constraint of force equilibrium between inside and outside groove,the strain rate difference makes the normal stress inside groove firstly decrease and then increase during calculation,which makes the prediction algorithm of forming limit convergent at elevated temperature.The decrease of normal stress inside groove is mainly caused by high temperature softening effect and the rotation of groove,while the increase of normal stress inside groove is mainly due to strain rate hardening effect.
基金Supported by Australia Research Council(No.DP0451966)
文摘In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume element （RVE）. Nudistinctive modeling of brick and mortar with their respective dynamic material properties obtained from laboratory tests. The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressuredependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor （DIF） of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.
