速脉饮治疗房室传导阻滞31例报告

我们应用速脉饮治疗房室传导阻滞31例,临床症状及心电图改善明显,血脂、血流变、微循环均有不同程度改善,心功能有不同程度提高,现报道如下。

速脉灵治疗病窦综合征100例疗效观察

目的探讨中药速脉灵治疗病窦综合征的疗效。方法100例患有不同类型的病窦综合征患者参加此项治疗。速脉灵由附子、肉桂、仙灵脾、黄芪、红参、麦冬、五味子、玉竹、丹皮、三七、桃仁等组成,水煎服,每日1剂,4周为1个疗程。结果速脉灵对3种类型病窦综合征的疗效无显著差别,总有效率80%。结论速脉灵具有益气助阳、活血化瘀、复脉通络的作用,是治疗病窦综合征的有效方法。

不同初始剂量胺碘酮治疗无脉性室速和心室纤颤疗效观察

目的观察不同初始负荷剂量胺碘酮治疗无脉性室速和室颤的效果。方法选择183例无脉性室速和室颤患者,经常规心肺复苏、使用肾上腺素以及3次电除颤未能转复者,随机分为两组:胺碘酮组(n=125):300mg或150mg胺碘酮溶于40mL葡萄糖液中快速静注,再予电除颤,按初始剂量,胺碘酮组又分为300mg组(n=64)和150mg组(n=61);对照组(n=58):仅给予常规肾上腺素、CPR及电除颤;记录并比较各组患者的心律转复时间,入院、出院存活人数。结果两种剂量的胺碘酮均能明显缩短心律转复时间[(9.8±1.7)min,(10.5±2.3)min vs (15.6±2.2)min](P<0.05),提高入院存活率(35.9%,32.8% vs 20.7%)(P<0.05),300mg剂量的胺碘酮的效果略优于150mg剂量组,但差异无统计学意义(P>0.05),胺碘酮对于出院存活率无明显改善。结论300mg与150mg剂量的胺碘酮能有效缩短无脉性室速和心室纤颤患者的心律转复时间,但不能提高出院存活率。

阴阳学说的现代解释和研究

阴阳学是我国古代的朴素辩证法,将阴阳学说应用到医学中来是祖国医学的最重要的根本特色,也是明显区别于西医的最重要的特征。阴阳学说来源于哲学,故仍需用哲学的观点及方法对之进行研究。

Pulse Quick Charger of Electric Vehicle

In order to improve the charging efficiency of lead acid battery, shorten the charging time and avoid the battery polarization, a new charging method was put forward. Based on the analyzed results of charging characteristic of lead acid battery, a pulse quick charger is designed to adjust the charging current pulse’s amplitude and pulse width automatically stage by stage according to the measured battery voltage and feedback current. Compared with other kinds of quick chargers, it has such characteristics as shorter charging time, higher charging efficiency and lower temperature increasing during the charging process. As a result, the battery polarization is reduced efficiently.

Grain refinement of as-cast superalloy IN718 under action of low voltage pulsed magnetic field

The grain refinement of superalloy IN718 under the action of low voltage pulsed magnetic field was investigated. The experimental results show that fine equiaxed grains are acquired under the action of low voltage pulsed magnetic field. The refinement effect of the pulsed magnetic field is affected by the melt cooling rate and superheating. The decrease of cooling rate and superheating enhance the refinement effect of the low voltage pulsed magnetic field. The magnetic force and the melt flow during solidification are modeled and simulated to reveal the grain refinement mechanism. It is considered that the melt convection caused by the pulsed magnetic field, as well as cooling rate and superheating contributes to the refinement of solidified grains.

IMPROVEMENT IN WAVEFORM OF SWITCHING POINT-PRESET SPWM INVERTERS

Total harmonic distortion (THD) is one of the key technical indexes of inverter output voltage. Optimization o f switching points and filter parameters could ensure the switching-point-preset sinusoidal pulse width modulation (SPWM) inverters with low harmonyic content in theory.The THD value would be increased by switching time delay of power devices and control circuit. A new control coecuit with delay time compensation is presented in this paper. With this control scheme, the output of the inverter could be basically identified with the theory given.Test results of experimental circuit verify that the control circuit presented in this paper is feasible. The THD of the inverter output voltage could be reduced to a certain extent by this method.

An improved resampling algorithm for rolling element bearing fault diagnosis under variable rotational speeds

In order to address the issues of traditional resampling algorithms involving computational accuracy and efficiency in rolling element bearing fault diagnosis, an equal division impulse-based（EDI-based） resampling algorithm is proposed. First, the time marks of every rising edge of the rotating speed pulse and the corresponding amplitudes of faulty bearing vibration signal are determined. Then, every adjacent the rotating pulse is divided equally, and the time marks in every adjacent rotating speed pulses and the corresponding amplitudes of vibration signal are obtained by the interpolation algorithm. Finally, all the time marks and the corresponding amplitudes of vibration signal are arranged and the time marks are transformed into the angle domain to obtain the resampling signal. Speed-up and speed-down faulty bearing signals are employed to verify the validity of the proposed method, and experimental results show that the proposed method is effective for diagnosing faulty bearings. Furthermore, the traditional order tracking techniques are applied to the experimental bearing signals, and the results show that the proposed method produces higher accurate outcomes in less computation time.

A Study on the Static Characteristics of Typical Composite High Speed On-Off Valves

Natural properties of high speed on-off valves can be described through their on-off behavior and spool movement (static and oscillating) characteristics. High speed on-off valves can be combined with actuators in systems into four typical types of composite valves whose static characteristics are related not only to the structures of the single valves and the composite ones, but also to the PWM control modes. It is proved that the composite valves have similar features as those of servo valves. The nonlinear specific properties of single valves composited can be completely compensated by the suitable PWM control modes.

Aortoesophageal fistula:A case misdiagnosed as esophageal polyp

Aortoesophageal fistula(AEF)is a rare and fatal disorder. It is also a life-threatening cause of massive upper gastrointestinal hemorrhage.Thoracic aortic aneurysm is the most common cause of AEF.Management of a patient with this disorder requires rapid diagnosis and immediate intervention,which is considered the best way to save the patient's life.We report a case of AEF misdiagnosed as esophageal polyp.

Science Letters:Controllable high repetition rate gain-switchedNd:YVO_4 microchip laser

We demonstrated a monolithic, compact, diode-pumped gain-switched Nd:YVO4 laser at 1.064 μm wavelength with controllable repetition rate of 1 Hz to 25 kHz. Stable gain-switched pulse train with maximum repetition rate of 25 kHz and pulse width of 16 ns was obtained.

High-Speed,Robust CMOS Dynamic Circuit Design

A novel circuit with a narrow pulse driving structure is proposed for enhancing the noise immunity and improving the performance of wide fan-in dynamic circuits. Also,an analytical mode that agrees well with simulations is presented for transistor sizing. Simulation results show that an improvement of up to 12% over the conventional technique at 1GHz is obtained with this circuit,which can run 1.6 times faster than the existing technique with the same noise immunity.

Linear Track Estimation Using Double Pulse Sources for Near-Field Underwater Moving Target

The double pulse sources （DPS） method is presented for linear track estimation in this work. In the field of noise identification of underwater moving target, the Doppler will distort the frequency and amplitude of the radiated noise. To eliminate this, the track estimation is necessary. In the DPS method, we first estimate bearings of two sinusoidal pulse sources installed in the moving target through baseline positioning method. Meanwhile, the emitted and recorded time of each pulse are also acquired. Then the linear track parameters will be achieved based on the geometry pattern with the help of double sources spacing. The simulated results confirm that the DPS improves the performance of the previous double source spacing method. The simulated experiments were carried out using a moving battery car to further evaluate its performance. When the target is 40-60m away, the experiment results show that biases of track azimuth and abeam distance of DPS are under 0.6° and 3.4m, respectively. And the average deviation of estimated velocity is around 0.25m/s.

Low-Rate DoS Attack Flows Filtering Based on Frequency Spectral Analysis

In frequency domain,the power spectrum of Low-rate denial of service(LDoS) attacks is totally spread into the spectrum of normal traffic.It is a challenging task to detect and filter LDoS attack flows from the normal traffic.Based on the analysis of LDoS attack flows and legitimate TCP traffic in time and frequency domains,the periodicity of the TCP traffic and LDoS attack flows is explored to facilitate the research of network traffic processing.Hence,an approach of LDoS attack flow filtering based on frequency spectrum analysis is proposed.In this approach,the TCP traffic and LDoS attack flows are transformed from the time domain into the frequency domain.Then the round-trip time(RTT) is estimated by using frequency domain search method.Analysis of amplitude spectrum shows that TCP traffic energy is mainly concentrated on the points of n/RTT.Therefore,a comb filter using infinite impulse response(IIR) filter is designed to filter out the LDoS attack flows in frequency domain,while most legitimate TCP traffic energy at the points of n/RTT are pass through.Experimental results show that the maximum pass rate for legitimate TCP traffic reaches 92.55%,while the maximum filtration rate of LDoS attack flows reaches 81.36%.The proposed approach can effectively filter the LDoS attack flows while less impact on the legitimate TCP traffic.

Analysis on conducted coupling of electrical fast transient burst in mines

Under the inflammable or explosive environment, the direct measurement methods by opening up the explo- sion-proof shell of electrical installations were not adopted. So, it＇s impossible to have a quantitative analysis on the limit of conducted disturbance for electrical fast transient burst （EFT/B） in such dangerous environments. Transient conducted coupling model, which using EFT/B as its excitation source, can be built based on circuit and electromagnetic field theory. Furthermore, numerical analysis was performed. The results indicate that the capacitive coupling voltage is the same polarity as EFT/B, and is the main disturbance form of conducted coupling in mines. The inductive coupling voltage is reversed polarity with the ca- pacitive coupling voltage, and both peaks appear only in the rising time of EFT/B, which increase with the rising of load resistance. Moreover, the cable coupling voltage on the side of disturbance source is higher than the one on the other side in tunnel. To reduce the common resistance can suppress the resistive coupling disturbance.

Optimization of Parameters for Melt Crystallization of p-Cresol

Laboratory-scale experiments were carried out to evaluate the influences of operational parameters on the melt crystallization efficiency for p-cresol purification.The optimal crystallization conditions were determined:dynamic pulsed aeration at 90 L·h-1 and the cooling rate of 0.6-0.8 ℃·min-1,followed by sweating at 0.2-0.3 ℃·min-1 for 40 min.Results also demonstrate that the melt crystallization efficiency is sensitive to feed concentration,which highlights this technology for separation and purification of high purity products.

Optimization Design of Silicon Micro - capacitive Accelerometer with PWM Technique

The property of silicon micro-capacitive accelerometer is analyzed and discussed by establishing the model of the sensor,to lay a basis for optimization design of sensor system structure. Discussed issues include the static modeling and dynamic behavior of the two commonly used structures,i.e., double-cantilever supported and four-beam supported structures, and also the measurement range of these devices.

Natural ventilation performance of single room building with fluctuating wind speed and thermal mass

Natural ventilation is driven by either buoyancy forces or wind pressure forces or their combinations that inherit stochastic variation into ventilation rates. Since the ventilation rate is a nonlinear function of multiple variable factors including wind speed, wind direction, internal heat source and building structural thermal mass, the conventional methods for quantifying ventilation rate simply using dominant wind direction and average wind speed may not accurately describe the characteristic performance of natural ventilation. From a new point of view, the natural ventilation performance of a single room building under fluctuating wind speed condition using the Monte-Carlo simulation approach was investigated by incorporating building facade thermal mass effect. Given a same hourly turbulence intensity distribution, the wind speeds with 1 rain frequency fluctuations were generated using a stochastic model, the modified GARCH model. Comparisons of natural ventilation profiles, effective ventilation rates, and air conditioning electricity use for a three-month period show statistically significant differences （for 80% confidence interval） between the new calculations and the traditional methods based on hourly average wind speed.

Ultrasonic characterization of modified Cr_2O_3 coatings by reflection coefficient spectroscopy

Pores,microcracks and density of plasma sprayed Cr2O3 coatings before and after high-intensity pulsed ion beam(HIPIB) irradiation were investigated using the ultrasonic reflection coefficient spectroscopy(URCS).The URCS was analyzed based on an acoustic transmission model for the multi-layered structure.The longitudinal velocity in the coatings was calculated from the experimental URCS,and the attenuation coefficient expression was deduced by comparing the experimental and numerical fitting amplitude spectral lines.The longitudinal velocity of as-sprayed Cr2O3 coating is 2 002 m/s,and increases to 2 099 and 2 148 m/s after being irradiated by HIPIB with 1 and 5 shots.Correspondingly,the factor A changes from 0.046 to 0.026 and 0.020 and n from 1.702 to 1.658 and 1.649 in the attenuation coefficient expression of α=Af n.It is observed that the surface morphology of Cr2O3 coatings changes from rough and porous to smooth and uniform with the increase of shot number,which accords with the ultrasonic analyses reasonably.The URCS seems to provide a convenient and nondestructive method to characterize surface modification of the plasma sprayed coatings.

Brachial-ankle pulse wave velocity is an independent predictor of carotid artery atherosclerosis in the elderly

Objective Brachial-ankle pulse wave velocity （baPWV） is widely used as a simple noninvasive measure of arterial softness. The aim of this study was to evaluate the usefulness of baPWV as a predictor of the carotid artery atherosclerosis in the elderly. Methods A total of 721 elderly participants （mean ~ SD age, 70.3 -4- 5.6years） were enrolled in the current study. All participant underwent both baPWV measurement and B-mode ultrasound for the intima-media thickness. Carotid atherosclerosis （CAS） was defined as the present of carotid plaque or and/or intima media thickness for at least 1.1 mm. Results A multivariate logistic regression analysis reveals that age, sex, brachial-ankle pulse wave velocity, smoking and LDL-C level showed a significant correlation with the presence of CAS. The odds ratios of CAS associated with a 500cm/s increase of brachial-ankle pulse wave velocity were 2.378 [95% confidence interval, 1.36 to 4.00, P〈0.05], 3.733 [95% confidence interval, 1.729 to 8.058, P〈0.01], 4.438 [95% confidence interval, 1.659 to 11.803, P〈0.01]. The baPWV significantly correlated with IMT by bivariate correlation analysis （r=-0.39; p=0.001）. After adjusting for factors influencing, baPWV all the same correlated with IMT （r=-0.35; p=0.001）.Conclusion These results indicate that brachial-ankle PWV is an independent predictor of CAS in the elderly.It also means that the direct measurement of arterial stiffness by this simple method may be of great help for the evaluation of carotid artherosclerosis, at least in the elderly