Influence of blank holder type on drawability of 5182-O aluminum sheet at room temperature

To study the influence of blank holder type on the drawability of 5182-O aluminum sheet at room temperature, the flat blank holder and curved blank holder were employed during the deep drawing process. The microstructures were characterized by optical microscopy （OM）. The results reveal that the limiting drawing ratio （LDR） of 5182-O aluminum alloy sheet is 1.7 using the flat blank holder. The drawn cup have severe earring. Compared with using flat blank holder, the LDR of 5182-O aluminum alloy sheet is enhanced to 2.0 using curved blank holder. In addition, the earring ratio also reduces and flange wrinkling is prevented when the curved blank holder is used. These are due to a more uniform sheet flow in different directions with curved blank holder.

論新見楚君酓延尊以及相關的幾個問題

一、前言吴鎮烽先生主編的《商周青銅器銘文暨圖像集成》[1](底下簡稱《銘圖》)第21册11790號261頁著録一件新見銅器一一'楚君酓延尊'(圖一),[2]吴先生描述器形爲喇叭口,長頸,扁圓腹,高圈下有很高的筒狀邊圈,頸部到口沿有四道扉棱。頸部飾蕉葉紋,葉内填蟠螭紋,腹部飾羽翅紋,圈足飾蟠螭紋,認爲銅器年代是'戰國晚期'。[3]吴先生所作的釋文是:

Crack Quantification of Bolted Joints by Using a Parallelogram Eddy Current Array Sensing Film

Crack monitoring at the bolt hole edge is one of the important focuses of aircraft structural health monitoring.In this study,a novel eddy current sensing film based on a parallelogram coil array is developed to quantitatively monitor the crack characteristics near the bolt hole with fewer layers and coils,compared with the existing methods.The parallelogram coil array configuration is designed and optimized to improve the quantitative monitoring ability of the crack.A 3×3 parallelogram coil array is used to quantify the crack parameters of aluminum bolted joints.Finite element simulation and experiments show that the proposed parallelogram coil array could not only accurately and quantitatively identify the crack angle at the edge of the bolt hole,but also track the crack length along the radial direction of the bolt hole and the depth along the axial direction.

Mutual Inductance Calculation Between Arbitrarily Positioned Polygonal Coils

Polygonal coil systems are designed for increasing and more kinds of sensors and electromagnetic systems.This paper presents a method for calculating mutual inductance between polygonal coils including irregular polygons.Based on the Biot-Savart law,the method calculates mutual inductance by dividing a polygonal coil into finite wires,and expresses the magnetic induction intensity generated by the excitation coil as a function of the spatial position of each vertex of the coil.The calculation method of the feasible region of the objective function is updated and the calculation process is simplified,so the calculation accuracy is improved.For octagon coils arbitrarily positioned in space,the accuracy of the algorithm is verified by the simulation and experiment.

Structures of Facial Cycles and C-bridges of Embedded Graphs with Locally LEW-embedding Properties

In this paper, we show that for a locally LEW-embedded 3-connected graph G in orientable surface, the following results hold： 1） Each of such embeddings is minimum genus embedding; 2） The facial cycles are precisely the induced nonseparating cycles which implies the uniqueness of such embeddings; 3） Every overlap graph O（G, C） is a bipartite graph and G has only one C-bridge H such that C U H is nonplanar provided C is a contractible cycle shorter than every noncontractible cycle containing an edge of C. This extends the results of C Thomassen＇s work on LEW-embedded graphs.

A New Model of Lithosphere Deformation Beneath the Okinawa Trough Based on Gravity Data

The Ryukyu trench-arc system can be divided into two types according to its subduction model. The normal subduction in the northern part of the Philippine Sea plate creates a hinge sedimentary wedge with large deformation at the collision front, while the oblique subduction in the southern part gives rise to a smaller accretion with small deformation than that in the northern part. The mechanisms that cause the distinction between these two types have been analysed and calculated by using gravity data based on the lithosphere rheology and the stress state of the lithosphere in the subduction boundary. The two types of subduction model are associated with the internal extension in the southern Okinawa Trough and the small extension in the northern part. The difference of the stress state between the two types of subduction model is also manifested in other tectonic features, such as topography, volcanic activity and crust movement. Modeling bathymetric and gravity data from this area suggests that the oblique subduction of low angle, together with smooth geometry of the overlying plate crust, results in small stress released on the south of the trench by the subduction plate. The intraplate faults in the southern Okinawa Trough behind the trench stand in surplus intensive stress. On the other hand, the normal subduction of high angle, together with strong undulation geometry of the overlying crust, results in more intensive stress released in the northern Ryukyu Trench than that in the south. The intraplate faults in the northern Okinawa Trough behind the northern Ryukyu Trench stand in small stress.

Temporal-spatial Variations of Dynamic Source Parameters in the Capital Circle Region and Its Surrounding Areas before the 2006 M_S5.1 Wenan Earthquake in Hebei Province

Source spectra,corner frequency and zero frequency amplitudes in near-source conditions were measured using waveform data from 989 earthquakes with magnitudes larger than ML2.0 observed by the Beijing Digital Telemetry Seismic Network in the Capital Circle Region of China and its surrounding areas from January 2002 to June 2006 by the Brune model.Relevant formulas that were used for the calculation of dynamic source parameters include rupture radius,seismic moment,seismic energy,stress drop,and apparent stress.Scaling relations and characteristics of temporal-spatial variations of these dynamic parameters before the MS5.1 Wenan earthquake in Hebei Province that occurred on July 20,2006 were analyzed.Results show that apparent stress,stress drop,and the ratio of seismic energy to the rupture radius had relatively high values in some areas before the Wenan earthquake.These high-value concentration areas were mainly distributed in the North China Plain seismic zone.As is seen from the time curves,parameters,such as apparent stress,stress drop,and ratio of seismic energy to rupture radius underwent significant ascending processes before the Wenan earthquake,but the variation in the corner frequency showed a descending trend.This result might be related to the enhancement of stress in the North China Plain seismic zone before the earthquake.

Acyclic edge coloring of planar graphs without adjacent cycles

A proper edge coloring of a graph G is said to be acyclic if there is no bicolored cycle in G.The acyclic edge chromatic number of G,denoted byχ′a(G),is the smallest number of colors in an acyclic edge coloring of G.Let G be a planar graph with maximum degree.In this paper,we show thatχ′a(G)+2,if G has no adjacent i-and j-cycles for any i,j∈{3,4,5},which implies a result of Hou,Liu and Wu(2012);andχ′a(G)+3,if G has no adjacent i-and j-cycles for any i,j∈{3,4,6}.

Thermal convection thinning of the North China Craton: Numerical simulation

We used twodimensional numerical simulations to investigate smallscale convection in the upper mantlelithosphere system with depth and temperaturedependent viscosity. Our aim was to examine the mechanism of craton thinning by thermal con vection. The model domain is 700 km deep and 700 km wide with a resolution of 71x71 nodes and 160000 markers. The ve locity boundary conditions are freeslip along all the boundaries. A thermal insulation condition was applied at the two side walls, with constant temperatures for the top and bottom boundaries. We assumed an initial temperature of 273 K at the upper boundary and 1673 K at the lower boundary, and 1573 K at the bottom of the lithosphere （200 km depth） for the thick, cold, and stable North China Craton （NCC）. We calculated the thermal evolution in the upper mantle when the temperature at its bottom is raised because of lower mantle convection or plumes. The temperature at the bottom of the upper mantle was set at 1773, 1873, 1973, and 2073 K for different models to study the temperature effect on the lithospheric thinning processes. Our endmember calculations show that with the bottom boundary raising the lithosphere can be thinned from a depth of 200 km to a depth of between 100 and 126.25 km. The thinning rates are at mm/y order of magnitude, and the thinning timescale is about 10 Ma.

The Edge-pancyclicity of Generalized Hypercubes

Generalized hypercubes （denoted by Q（d1,d2,... ,dn）） is an important network topology for parallel processing computer systems. Some methods of forming big cycle from small cycles and links have been developed. Basing on which, we has proved that in generalized hypercubes, every edge can be contained on a cycle of every length from 3 to IV（G）I inclusive and all kinds of length cycles have been constructed. The edgepanciclieity and node-pancilicity of generalized hypercubes can be applied in the topology design of computer networks to improve the network performance.

THE METHOD OF COLORING IN GRAPHS AND ITS APPLICATION

Graph coloring has interesting real life applications in optimization and network design. In this paper some new results on the acyclic-edge coloring, f-edge coloring, g-edge cover coloring, （g, f）-coloring and equitable edge-coloring of graphs are introduced. In particular, some new results related to the above colorings obtained by the authors are given. Some new problems and conjectures are presented.