降低混流式水轮机高部分负荷压力脉动方法探讨

针对混流式模型水轮机研发中有关降低高部分负荷压力脉动的方法进行了探讨。通过不同转轮多个方案的模型试验和深入比较,掌握了不同形式泄水锥对混流式水轮机高部分负荷压力脉动的影响规律以及不同补气位置对长泄水锥混流式水轮机转轮压力脉动的影响,为电站运行中降低高部分负荷压力脉动提供了科学依据。

pCO_2 and carbon fluxes across sea-air interface in the Changjiang Estuary and Hangzhou Bay

Partial pressure of CO2(pCO2) was investigated in the Changjiang(Yangtze River) Estuary,Hangzhou Bay and their adjacent areas during a cruise in August 2004,China.The data show that pCO2 in surface waters of the studied area was higher than that in the atmosphere with only exception of a patch east of Zhoushan Archipelago.The pCO2 varied from 168 to 2 264 μatm,which fell in the low range compared with those of other estuaries in the world.The calculated sea-air CO2 fluxes decreased offshore and varied from -10.0 to 88.1 mmol m-2 d-1 in average of 24.4 ± 16.5 mmol m-2 d-1.Although the area studied was estimated only 2 × 104 km2,it emitted(5.9 ± 4.0) × 103 tons of carbon to the atmosphere every day.The estuaries and their plumes must be further studied for better understanding the role of coastal seas playing in the global oceanic carbon cycle.

降低高部分负荷压力脉动方法探讨

本文针对混流式模型水轮机研发中有关降低高部分负荷压力脉动的方法进行了探讨。通过不同转轮多个方案的模型试验和深入比较,掌握了不同形式泄水锥对混流式水轮机高部分负荷压力脉动的影响规律以及不同补气位置对长泄水锥混流式水轮机转轮压力脉动的影响。为电站运行中降低高部分负荷压力脉动提供了科学依据。

The Effect of Hydrostatic Pressure Fields on the Dispersion Characteristics of Fluid-shell Coupled System

The effect of hydrostatic pressure on the vibration dispersion characteristics of fluid-shell coupled structures was studied.Both fluid-loaded cylindrical shells and fluid-filled cylindrical shells were considered.Numerical analysis was applied to solve the dispersion equations for shells filled with or loaded with fluid at various hydrostatic pressures.The results for external pressure showed that non-dimensional axial wave numbers are nearly independent when the pressure is below the critical level.The influence of internal pressure on wave numbers was found significant for the real branch s=1 and the complex branches of dispersion curves.The presence of internal pressure increased the cut on frequencies for the branch s=1 for high order wave modes.

Advances of the Vertical Directional Solidification Technique for the Growth of High Quality GaSb Bulk Crystals

Advantages of the detached phenomena have influenced researchers to modify the conventional methods to promote it on the earth. Since 1994, the vertical directional solidification （VDS） technique has been employed for the growth of bulk crystals, without the seed, without contact to the ampoule wall, without coating and without external pressure. An automated furnace was designed and fabricated for the controlled temperature gradients, growth conditions and parameters. The typical ingots growths of GaSb have shown the gap of 20 μm-145 μm and mobility μn = 1125 cm^2/V.sec at 300 K. Mobility is highest and five times larger than the attached growths. Dislocation density is the order of 104/cm2 in the conical region, decreases in the direction of growth, and in many crystals reached less than 103/cm2. The spontaneous gap formation due to the meniscus depends on the pressure differences and thermal state. GaSb grown ingots have shown progress in the properties of crystal grown ever, and attributed to reduce thermal stress without contact to the ampoule wall.

影响乌江渡发电厂机组稳定运行的若干问题

乌江渡发电厂一期工程机组增容改造和二期工程扩建机组投运后，逐渐暴露出一些影响机组稳定运行的若干问题。本文通过对一期工程1号机组存在“高部分负荷压力脉动”现象、二期工程4号与5号机组推力轴承径向摆度超标，以及一期工程增容改造机组大轴轴心补气量不足、一期工程1—3号发电机污染严重等问题的研究分析，提出了相应的处理方法的建议。

Experimental investigation of friction coefficient in tube hydroforming

The friction coefficient between tube and die in guide zone of tube hydroforming was obtained. In hydroforming, the tube is expanded by an internal pressure against the tool wall. By pushing the tube through tool, a friction force at the contact surface between the tube and the tool occurs. In guiding zone, the friction coefficients between tube and die can be estimated from the measured axial feeding forces. In expansion zone, the friction coefficients between tube and die can be evaluated from the measured geometries of expanded tubes and FE analysis.

THE EFFECT OF POSTERIOR ELEMENT RESECTION ON THE STRESS DISTRIBUTION IN THE LUMBAR SPINEA

A three-dimensional finite element model of the lumbar motion segment was used to predict the stress distribution in lumbar spine with posterior element resection. It was shown that the stress level in all parts of the lumbar spine was elevated although the stress distribution remained unchanged. The authors concluded that the posterior element resection in lumbar surgery should be avoided as much as possible.

Analysis of Properties of Thrust Bearing in Ship Propulsion System

Thrust bearing is a key component of the propulsion system of a ship. It transfers the propulsive forces from the propeller to the ship＇s hull, allowing the propeller to push the ship ahead. The performance of a thrust bearing pad is critical. When the thrust bearing becomes damaged, it can cause the ship to lose power and can also affect its operational safety. For this paper, the distribution of the pressure field of a thrust pad was calculated with numerical method, applying Reynolds equation. Thrust bearing properties for loads were analyzed, given variations in outlet thickness of the pad and variations between the load and the slope of the pad. It was noticed that the distribution of pressure was uneven. As a result, increases of both the outlet thickness and the slope coefficient of the pad were able to improve load beating capability.

Investigation of the Aerodynamic Character in Turbine Cascades with Aft-loaded Profile

For evaluate the aerodynamic character of the turbine cascades which have the aft-loaded profile, the experimental investigation was carried out on the low speed annular wind tunnel. And the detailed measurements of the aerodynamic parameters were made from upstream to downstream of the two type turbine cascades, the one is the conventional straight blades cascade, the other is the curved blades cascades. The static pressure distributions on the endwall and the blade surface were also carried out. The influence of the aft-loaded profile and the curved blade on the development of loss and the pressure distribution was discussed, and analyses the different flow phenomena and mechanism in two type turbine cascades.

Computer simulation of flow and mixing at the duodenal stump after gastric resection

AIM： To investigate the flow and mixing at the duodenal stump after gastric resection, a computer simulation was implemented. METHODS： Using the finite element method, two different Billroth fl procedure cases （A and B） were modeled. Case A was defined with a shorter and almost straight duodenal section, while case B has a much longer and curved duodenal section. Velocity, pressure and food concentration distribution were determined and the numerical results were compared with experimental observations. RESULTS： The pressure distribution obtained by numerical simulation was in the range of the recorded experimental results. Case A had a more favorable pressure distribution in comparison with case B. However, case B had better performance in terms of food transport because of more continual food distribution, as well as better emptying of the duodena section. CONCLUSION： This study offers insight into the transport process within the duodenal stump section after surgical intervention, which can be useful for future patient-specific predictions of a surgical outcome.

Finite Element ANSYS Analysis of the Behavior for 6061-T6 Aluminum Alloy Tubes under Cyclic Bending with External Pressure

In this paper, by using adequate stress-strain relationship, mesh elements, boundary conditions and loading conditions, the finite element ANSYS analysis on the behavior of circular tubes subjected to symmetrical cyclic bending with or without external pressure is discussed. The behavior includes the moment-curvature and ovalization-curvature relationships. In addition, the calculated ovalizations at two different sections, middle and right cross-sections, are also included. Experimental data for 6061-T6 aluminum alloy tubes subjected to cyclic bending with or without external pressure were compared with the ANSYS analysis. It has been shown that the analysis of the elastoplatic moment-curvature relationship and the symmetrical, ratcheting and increasing ovalization-curvature relationship is in good agreement with the experimental data.

Identification of Emergent Substances as an Indicator of the Presence of Microorganism in the Downstream of River Moraca in Locality-Vukovci

Based on the screening analysis for the first time in Montenegro, water samples for the presence of emergent wereanalyzed. Results from the locality Vukovci, the lower course of the river Morale, have shown the presence of chemical components that indicate the presence of emergent in the water. Thus identification component is associated with the presence of fiziological groups of microorganisms at the site, which with its functional and significant role in many ways reduce environmental stress.

Analysis on Characteristics of Focal Mechanisms for the M_S7.3 Yutian Earthquake Sequence of February 12,2014

The paper inverts the focal mechanism solutions of the Yutian M_S7. 3 main shock,foreshocks and M_S≥3. 5 aftershocks by using the CAP method,based on the broadband waveforms recorded by the Xinjiang and Tibet Digital Seismic Networks. The results show that the M_S7. 3 strong earthquake is of strike-slip type with a normal faulting component,and combined with the analysis of focal structure and the aftershock distribution,the nodal plane I with strike 241°,dip 90° and rake- 22° is considered to be the seismogenic fault plane of the main shock. The direction of P-axis for the main shock is 194°,close to the near NS direction of the principal stress P-axis of historical strong earthquakes in this region. The focal mechanism solution of the M_S5. 4 foreshock has a good consistency with that of the main shock. Among the 18 aftershocks,10 are of strike-slip type,6 are of normal faulting type and 2 are of thrust type. 70% of the aftershocks in the sequence have a focal mechanism with P-axis in the near-NS direction. The focal depths of this M_S7. 3 earthquake sequences are distributed in the range of 5km- 28 km,with the majority in the depth range of 15km- 20 km,slightly deeper than the depth of 10 km of the main shock as calculated.

爱转角

笑渐不闻声渐悄,多情却被无情恼。过往的很多事情就像这笑声,已经悄然地远了。只剩下少年们的多情,和不知名的烦恼。不过,若是没有那些所谓无情的过往,就不会有这些真挚的文字了。

杨师傅:盼望公司降份儿钱

“油价涨了之后,我现在每天要多花25元油钱,一个月就是750元啊。”杨师傅向记者大倒苦水。杨师傅的车是自己承包的,每天还要交给公司近百元的份儿钱。杨师傅的车主要是用来接待旅游团,每天的利润差不多是500-600元。杨师傅同样觉得涨价对于现在的旅行团来讲简直是不可能完成的任务,不过,杨师傅乐观地估计过一阵子运价肯定会上涨。“目前还只能自己消化啊。”面对油价上涨,杨师傅表示,“毕竟现在还能多少赚一点,如果公司能够把份儿钱降下来,我的压力就会小很多,但是估计最近一段肯定没希望。”

Kinetics and rate-limiting mechanisms of dolomite dissolution at various CO_2 partial pressures

Techniques of rotating-disk and catalyst were used in investigating the kinetics of dolomite dissolution in flowing CO2-H2O system. Experiments run in the solutions equilibrated with various CO2 partial pressures (PCO2) from 30 to 100000 Pa. It shows that dissolution rates ofdolomite are related with rotating speeds at conditions far from equilibrium. This was explained by modified diffusion boundary layer (DBL) model. In addition, the dissolution rates increase after addition of carbonic anhydrase (CA) to solutions, where the CA catalyzes CO2 conversion. However, great differences occur among various CO2 partial pressures. The experimental observations give a conclusion that the modified DBL model enables one to predict dissolution rates and their behaviour at various PCO2 with satisfactory precision at least far from equilibrium.

Theoretical analysis of the velocity field, stress field and vortex sheet of generalized second order fluid with fractional anomalous diffusion

The velocity field of generalized second order fluid with fractional anomalous diiusion caused by a plate moving impulsively in its own plane is investigated and the anomalous diffusion problems of the stress field and vortex sheet caused by this process are studied. Many previous and classical results can be considered as particular cases of this paper, such as the solutions of the fractional diffusion equations obtained by Wyss; the classical Rayleigh’s time-space similarity solution; the relationship between stress field and velocity field obtained by Bagley and co-worker and Podlubny’s results on the fractional motion equation of a plate. In addition, a lot of significant results also are obtained. For example, the necessary condition for causing the vortex sheet is that the time fractional diffusion index β must be greater than that of generalized second order fluid α; the establiihment of the vorticity distribution function depends on the time history of the velocity profile at a given point, and the time history can be described by the fractional calculus.

Decompressive craniectomy or not： intraoperative experience in 41 patients with severe traumatic brain injury

Objective： To present our experience in using decompressive craniectomy （DC） among severe trau- matic brain injury （TBI） patients during operation and to discuss its indication. Methods： From October 2008 to May 2009, 41 patients aged between 18 and 75 years with severe TBI were in- cluded in this study. They underwent DC or non-DC （NDC） according to their intraoperative findings. Postoperative intracranial pressure （ICP）, complications, requiring second operation or not and outcomes were observed. Results： Fifteen patients underwent DC and 26 pa- tients did not. The average postoperative ICP of each pa- tient was lower than 20 mm Hg. For patients received DC, 2 had seizures after operation and 1 developed cerebrocele in the follow-up period; only matic seizures, but none of 1 NDC patient had post-trau- them had delayed haematoma, cerebrospinal fluid fistula, cerebrocele or infections. At the end of follow-up, 10 patients died, 6 had the GOS of 2, 2 of 3, 9 of 4 and 14of 5. Conclusions： DC is necessary to manage fulminant intracranial hypertension or intraoperative brain swelling. If there was not brain swelling after removal of the haematoma and necrotized neural tissues, it is safe to replace skull flap. The intraoperative finding is an important factor to decide whether to perform DC or not.

The evolution of multi-component visual signals in darters （genus Etheostoma）

As complex traits evolve, each component of the trait may be under different selection pressures and could respond independently to distinct evolutionary forces. We used comparative methods to examine patterns of evolution in multiple components of a complex courtship signal in darters, specifically addressing the question of how nuptial coloration evolves across different areas of the body. Using spectral reflectance, we defined 4 broad color classes present on the body and fins of 17 species of freshwater fishes （genus Etheostoma） and quantified differences in hue within each color class. Ancestral state reconstruction suggests that most color traits were expressed in the most recent common ancestor of sampled species and that differences among species are mostly due to losses in coloration. The evolutionary lability of coloration varied across body regions; we found sig- nificant phylogenetic signal for orange color on the body but not for most colors on fins. Finally, patterns of color evolution and hue Of the colors were correlated among the two dorsal fins and between the anterior dorsal and anal fins, but not between any of the fins and the body. The observed patterns support the hypothesis that different components of complex signals may be subject to distinct evolutionary pressures, and suggests that the combination of behavioral displays and morphology in communication may have a strong influence on patterns of signal evolution .