The thermal behavior of a thick transversely isotropic FGM rectangular plate was investigated within the scope of three-dimensional elasticity. Noticing many FGMs may have temperature-dependent properties, the materia...The thermal behavior of a thick transversely isotropic FGM rectangular plate was investigated within the scope of three-dimensional elasticity. Noticing many FGMs may have temperature-dependent properties, the material constants were further considered as functions of temperature. A solution method based on state-space formulations with a laminate approximate model was proposed. For a thin plate, the method was clarified by comparison with the thin plate theory. The influences of material inhomogeneity and temperature-dependent characteristics were finally discussed through numerical examples.展开更多
A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arse...A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arsenic in selected samples were evaluated. Arsenic contents in all input and output samples vary from 0.11% in raw lead to 6.66% in collected dust-2. More arsenic is volatilized in blast furnace and fuming furnace(73.02% of arsenic input) than bottom blowing furnace(10.29% of arsenic input).There are 78.97%, 13.69%, 7.31% of total arsenic distributed in intermediate materials, stockpiled materials and unorganized emissions, respectively. Matte slag-2, collected dust-1 and secondary zinc oxide are hazardous based on the arsenic concentrations of toxicity characteristic leaching procedure. According to risk assessment code(RAC) guideline, arsenic in collected dust-1 poses a very serious risk to the surrounding environment, arsenic in speiss, matte slag-2, water-quenched slag and secondary zinc oxide show low risk, while arsenic in matte slag-1, collected dust-2 and post dust has no risk to the environment.展开更多
An efficient synthesis of 2,6-pyridine dimethyl formate happened under the microwave irradiation is proposed. It is noteworthy that some factors influence the product yield such as time, temperature, ratio of reactant...An efficient synthesis of 2,6-pyridine dimethyl formate happened under the microwave irradiation is proposed. It is noteworthy that some factors influence the product yield such as time, temperature, ratio of reactants, and acidity which were discussed. The optimized quantity of 2,6-pyridine dimethyl acid is 10 mmol and methanol is 25 mmol. The yield is up to 95%-96% when using 2 mL 30% sulfuric acid. All products have been characterized by IR and 1H NMR.展开更多
A batch is a subset of jobs which must be processed jointly in either serial or parallel form. For the single machine, batching, total completion time scheduling problems, the algorithmic aspects have been extensively...A batch is a subset of jobs which must be processed jointly in either serial or parallel form. For the single machine, batching, total completion time scheduling problems, the algorithmic aspects have been extensively studied in the literature. This paper presents the optimal hatching structures of the problems on the batching ways： all jobs in exactly N（arbitrary fix batch number and 1 〈 N 〈 n） batches.展开更多
The interval graph completion problem of a graph G includes two class problems： the profile problem and the pathwidth problem, denoted as P（G） and PW（G） respectively, where the profile problem is to find an inter...The interval graph completion problem of a graph G includes two class problems： the profile problem and the pathwidth problem, denoted as P（G） and PW（G） respectively, where the profile problem is to find an interval supergraph with the smallest possible number of edges; the pathwidth problem is to find an interval supergraph with the smallest possible cliquesize. These two class problems have important applications to numerical algebra, VLSI- layout and algorithm graph theory respectively; And they are known to be NP-complete for general graphs. Some classes of special graphs have been investigated in the literatures. In this paper the exact solutions of the profile and the pathwidth of the complete multipartite graph Kn1,n2,...nr （r≥ 2） are determined.展开更多
文摘The thermal behavior of a thick transversely isotropic FGM rectangular plate was investigated within the scope of three-dimensional elasticity. Noticing many FGMs may have temperature-dependent properties, the material constants were further considered as functions of temperature. A solution method based on state-space formulations with a laminate approximate model was proposed. For a thin plate, the method was clarified by comparison with the thin plate theory. The influences of material inhomogeneity and temperature-dependent characteristics were finally discussed through numerical examples.
基金Project(2011AA061001)supported by the National High Technology Research and Development Program of ChinaProject(51304251)supported by the National Natural Science Foundation of China+1 种基金Project(2013M542141)supported by China Postdoctoral FoundationProject(K1201010-61)supported by Planned Program of Science and Technology of Changsha,China
文摘A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arsenic in selected samples were evaluated. Arsenic contents in all input and output samples vary from 0.11% in raw lead to 6.66% in collected dust-2. More arsenic is volatilized in blast furnace and fuming furnace(73.02% of arsenic input) than bottom blowing furnace(10.29% of arsenic input).There are 78.97%, 13.69%, 7.31% of total arsenic distributed in intermediate materials, stockpiled materials and unorganized emissions, respectively. Matte slag-2, collected dust-1 and secondary zinc oxide are hazardous based on the arsenic concentrations of toxicity characteristic leaching procedure. According to risk assessment code(RAC) guideline, arsenic in collected dust-1 poses a very serious risk to the surrounding environment, arsenic in speiss, matte slag-2, water-quenched slag and secondary zinc oxide show low risk, while arsenic in matte slag-1, collected dust-2 and post dust has no risk to the environment.
文摘An efficient synthesis of 2,6-pyridine dimethyl formate happened under the microwave irradiation is proposed. It is noteworthy that some factors influence the product yield such as time, temperature, ratio of reactants, and acidity which were discussed. The optimized quantity of 2,6-pyridine dimethyl acid is 10 mmol and methanol is 25 mmol. The yield is up to 95%-96% when using 2 mL 30% sulfuric acid. All products have been characterized by IR and 1H NMR.
基金Supported by the NSF of Henan Province(082300410070)
文摘A batch is a subset of jobs which must be processed jointly in either serial or parallel form. For the single machine, batching, total completion time scheduling problems, the algorithmic aspects have been extensively studied in the literature. This paper presents the optimal hatching structures of the problems on the batching ways： all jobs in exactly N（arbitrary fix batch number and 1 〈 N 〈 n） batches.
基金Supported by the Natural Science Foundation of Henan Province（082300460190） Sponsored by Program for Science and Technology Innovation Talents in Universities of Henan Province.
文摘The interval graph completion problem of a graph G includes two class problems： the profile problem and the pathwidth problem, denoted as P（G） and PW（G） respectively, where the profile problem is to find an interval supergraph with the smallest possible number of edges; the pathwidth problem is to find an interval supergraph with the smallest possible cliquesize. These two class problems have important applications to numerical algebra, VLSI- layout and algorithm graph theory respectively; And they are known to be NP-complete for general graphs. Some classes of special graphs have been investigated in the literatures. In this paper the exact solutions of the profile and the pathwidth of the complete multipartite graph Kn1,n2,...nr （r≥ 2） are determined.
