An ionic conductivity prediction equation at low concentration for two acid salts is proposed taking into account the dissociation and association equilibria among ions. The salts considered are sodium and potassium h...An ionic conductivity prediction equation at low concentration for two acid salts is proposed taking into account the dissociation and association equilibria among ions. The salts considered are sodium and potassium hydrogen tartrates. There is no additional parameter of high order terms except for the Onsager's coefficient of limited term in the new equation. Results show a complex conductance of acidic tartrates in aqueous solution. The molar conductivities of metal ions are nearly constant such that the contributions from hydrogen and tartrate ions decrease with concentration, while the molar conductivity of bitartrate ion increases with concentration.展开更多
Porous anodic oxide films were fabricated galvanostatically on titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate solution with different anodizing time.Scanning electron microscopy(SEM) and field emission scanning el...Porous anodic oxide films were fabricated galvanostatically on titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate solution with different anodizing time.Scanning electron microscopy(SEM) and field emission scanning electron microscopy(FE-SEM) were used to investigate the morphology evolution of the anodic oxide film.It is shown that above the breakdown voltage,oxygen is generated with the occurrence of drums morphology.These drums grow and extrude,which yields the compression stress.Subsequently,microcracks are generated.With continuous anodizing,porous oxides form at the microcracks.Those oxides grow and connect to each other,finally replace the microcrack morphology.The depth profile of the anodic oxide film formed at 1 800 s was examined by Auger electron spectroscopy(AES).It is found that the film is divided into three layers according to the molar fractions of elements.The outer layer is incorporated by carbon,which may come from electrolyte solution.The thickness of the outer layer is approximately 0.2-0.3 μm.The molar fractions of elements in the intermediate layer are extraordinarily stable,while those in the inner layer vary significantly with sputtering depth.The thicknesses of the intermediate layer and the inner layer are 2 μm and 1.0-1.5 μm,respectively.Moreover,the growth mechanism of porous anodic oxide films in neutral tartrate solution was proposed.展开更多
基金Supported by the National Natural Science Foundation of China(No.29736170)
文摘An ionic conductivity prediction equation at low concentration for two acid salts is proposed taking into account the dissociation and association equilibria among ions. The salts considered are sodium and potassium hydrogen tartrates. There is no additional parameter of high order terms except for the Onsager's coefficient of limited term in the new equation. Results show a complex conductance of acidic tartrates in aqueous solution. The molar conductivities of metal ions are nearly constant such that the contributions from hydrogen and tartrate ions decrease with concentration, while the molar conductivity of bitartrate ion increases with concentration.
基金Project(50571003) supported by the National Natural Science Foundation of China
文摘Porous anodic oxide films were fabricated galvanostatically on titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate solution with different anodizing time.Scanning electron microscopy(SEM) and field emission scanning electron microscopy(FE-SEM) were used to investigate the morphology evolution of the anodic oxide film.It is shown that above the breakdown voltage,oxygen is generated with the occurrence of drums morphology.These drums grow and extrude,which yields the compression stress.Subsequently,microcracks are generated.With continuous anodizing,porous oxides form at the microcracks.Those oxides grow and connect to each other,finally replace the microcrack morphology.The depth profile of the anodic oxide film formed at 1 800 s was examined by Auger electron spectroscopy(AES).It is found that the film is divided into three layers according to the molar fractions of elements.The outer layer is incorporated by carbon,which may come from electrolyte solution.The thickness of the outer layer is approximately 0.2-0.3 μm.The molar fractions of elements in the intermediate layer are extraordinarily stable,while those in the inner layer vary significantly with sputtering depth.The thicknesses of the intermediate layer and the inner layer are 2 μm and 1.0-1.5 μm,respectively.Moreover,the growth mechanism of porous anodic oxide films in neutral tartrate solution was proposed.
