期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
毕赤酵母产木聚糖酶的动力学及流加策略 被引量:2
1
作者 江学斌 林健聪 梁世中 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2013年第12期115-119,124,共6页
为优化发酵工艺,通过单罐恒化培养对组成型毕赤酵母X-33产木聚糖酶XYL1的动力学进行了研究,并探讨了比生长速率与菌体生产率和产物生产率的关系.基于动力学研究,在50 L发酵罐中采用分段控制工艺表达XYL1.结果表明:比生长速率与葡... 为优化发酵工艺,通过单罐恒化培养对组成型毕赤酵母X-33产木聚糖酶XYL1的动力学进行了研究,并探讨了比生长速率与菌体生产率和产物生产率的关系.基于动力学研究,在50 L发酵罐中采用分段控制工艺表达XYL1.结果表明:比生长速率与葡萄糖浓度的关系基本符合Monod方程,最大比生长速率为0.35 h-1,饱和常数为0.38 g/L;当比生长速率介于0.024~0.212之间时,XYL1生成动力学模型可用一元二次方程描述;比底物消耗速率与比生长速率呈线性关系;最佳稀释速率为0.316 h-1,实验预测的最大菌体生产率为7.509 g/(L·h);当产物生产率最大时,比生长速率达0.156 h-1;最终发酵菌湿重达(415±12)g/L,酶活达(2788±85)IU/mL,实现了XYL1的高效表达. 展开更多
关键词 组成型毕赤酵母 木聚糖酶 发酵动力学 流加策略
下载PDF
糯米稠酒发酵工艺的优化研究 被引量:4
2
作者 马粉娟 刘邻渭 +2 位作者 苏娜 郭庆彬 李琼 《中国酿造》 CAS 北大核心 2008年第2期58-61,共4页
通过单因素试验和正交试验对稠酒的生产工艺进行优化,确定了稠酒的最佳工艺条件。结果表明,稠酒生产的最佳液化条件为添加1.0%的液化酶在40℃作用120min;最佳糖化条件为添加0.5%的糖化酶在30℃糖化24h:复合酵母的最佳配比:甜酒曲:黄酒酵... 通过单因素试验和正交试验对稠酒的生产工艺进行优化,确定了稠酒的最佳工艺条件。结果表明,稠酒生产的最佳液化条件为添加1.0%的液化酶在40℃作用120min;最佳糖化条件为添加0.5%的糖化酶在30℃糖化24h:复合酵母的最佳配比:甜酒曲:黄酒酵母:葡萄酒酵母为0.8%:0.05%:0.1%;最佳的发酵条件为发酵温度30℃,加水量1倍,发酵时间72h,组合酵母按比例添加甜酒曲0.64%、黄酒酵母0.04%、葡萄酒酵母0.08%。在此条件下生产的稠酒风味独特,具有浓郁的醇香滋味。 展开更多
关键词 糯米稠酒 液化 糖化 酵母组成 发酵工艺
下载PDF
Relationship between Ethanol and 2-phenylethanol Stress Tolerance and Fatty Acid Compositions of Saccharomyces cerevisiae
3
作者 Olga Mameeva Valentin Podgorsky 《Journal of Food Science and Engineering》 2013年第2期71-78,共8页
In the present study, we investigated of the ethanol (Eth), 2-phenylethanol (2-PE) and ethanol/2-phenylethanol (Eth/2-PE) stress tolerance and established relationship between stress tolerance and fatty acid com... In the present study, we investigated of the ethanol (Eth), 2-phenylethanol (2-PE) and ethanol/2-phenylethanol (Eth/2-PE) stress tolerance and established relationship between stress tolerance and fatty acid compositions of wine yeast strain S. cerevisiae UCM Y-524 in relation to different cultivation factors. Changes in cell membrane fatty acid profiles studied under different temperature and media. The active oxygenation, semi-aerobic cultivation supplemented Tween 80 conditions were used in different combinations. The concentrations of 2-PE and Eth, the fatty acids methyl esters (FAMES) in the media were measured by GC-MS analyses. 2-PE, Eth, FAMES were identified by NIST02 MS database at the 2-PE and Eth standard solution (Merck, Germany), bacterial FAMES standard (Supelco). Palmitoleic and oleic acid were dominated for S. cerevisiae UCM Y-524. The unsaturated/saturated fatty acid (UFA/SFA) ratio was higher than five for S. cerevisiae UCM Y-524 at 14 ~C in simple medium and about more than three for other conditions. It has been found that yeast cells grown in the presence of the 2-PE, Eth and Eth/2-PE appear to increase the amount of unsaturated fatty acids, especially oleic acid, in cellular lipids especially under active oxygenation supplemented with Tween 80. S. cerevisiae UCM Y-524 has a higher tolerance under 2-PE, Eth and Eth/2-PE stress at 28 ~C in a simple medium under aerobic conditions. A higher concentration of unsaturated fatty acids in the membrane S. cerevisiae UCM Y-524 and a lower temperature under aerobic conditions, has been considered to have a positive influence on the excretion of 2-phenylethanol. 展开更多
关键词 Yeasts 2-PHENYLETHANOL ETHANOL stress tolerance fatty acids.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部