Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been construc...Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been constructed hydrothermally using H_(2)cpna(5-(4-carboxyphenoxy)nicotinic acid),dpea(1,2-di(4-pyridyl)ethane),dpey(1,2-di(4-pyridyl)ethylene),and zinc,cobalt,and nickel chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the triclinic system,space group P1.Compounds 1-3 show 2D layer structures.The catalytic activities in the Knoevenagel condensation reaction of these compounds were investigated.Compounds 1 and 2 exhibit effective catalytic activities in the Knoevenagel condensa-tion reaction at room temperature.For this reaction,various parameters were optimized,followed by the investiga-tion of the substrate scope.CCDC:2335676,1;2335677,2;2335678,3.展开更多
The novel solid acid with both sulfonic and carbonyl acid groups has been synthesized from 3-((2-sulfoethoxy) carbonyl)acrylic acid and tetraethyl orthosilicate(TEOS). The catalytic activities were investigated throug...The novel solid acid with both sulfonic and carbonyl acid groups has been synthesized from 3-((2-sulfoethoxy) carbonyl)acrylic acid and tetraethyl orthosilicate(TEOS). The catalytic activities were investigated through the acetalization. The results showed that the novel solid acid was very efficient for the reactions with the high yields. The high acidity, high stability and reusability were the key feature of the novel solid acid. Moreover, the sulfonic and carbonyl acid groups could cooperate during the catalytic process, which improved its catalytic activities. The catalyst shows recyclability, and hold great potential for replacement of homogeneous catalysts.展开更多
A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3P...A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3PW12O40/MCM-48 was studied with butyraldehyde and glycol as reactants. H3PW12O40/MCM-48 was an excellent catalyst for the synthesizing butyraldehyde glycol acetal and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（butyraldehyde）： n（glycol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions had been found, that was, molar ratio of butyraldehyde to glycol was 1： 1.6, mass ratio of catalyst used to the reactants was 0.25% and reaction time was 75 min. Under these conditions, the yield of butyraldehyde glycol acetal can reach 79.74%.展开更多
文摘Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been constructed hydrothermally using H_(2)cpna(5-(4-carboxyphenoxy)nicotinic acid),dpea(1,2-di(4-pyridyl)ethane),dpey(1,2-di(4-pyridyl)ethylene),and zinc,cobalt,and nickel chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the triclinic system,space group P1.Compounds 1-3 show 2D layer structures.The catalytic activities in the Knoevenagel condensation reaction of these compounds were investigated.Compounds 1 and 2 exhibit effective catalytic activities in the Knoevenagel condensa-tion reaction at room temperature.For this reaction,various parameters were optimized,followed by the investiga-tion of the substrate scope.CCDC:2335676,1;2335677,2;2335678,3.
基金Supported by the Chinese National General Administration of Quality Supervision,Inspection and Quarantine(2012IK048,2011IK041)the National Natural Science Foundation of China(21103111)
文摘The novel solid acid with both sulfonic and carbonyl acid groups has been synthesized from 3-((2-sulfoethoxy) carbonyl)acrylic acid and tetraethyl orthosilicate(TEOS). The catalytic activities were investigated through the acetalization. The results showed that the novel solid acid was very efficient for the reactions with the high yields. The high acidity, high stability and reusability were the key feature of the novel solid acid. Moreover, the sulfonic and carbonyl acid groups could cooperate during the catalytic process, which improved its catalytic activities. The catalyst shows recyclability, and hold great potential for replacement of homogeneous catalysts.
基金This work was financially supported by the Natural Science Foundation of Hubei Province, China （No. 2005ABA053）.
文摘A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3PW12O40/MCM-48 was studied with butyraldehyde and glycol as reactants. H3PW12O40/MCM-48 was an excellent catalyst for the synthesizing butyraldehyde glycol acetal and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（butyraldehyde）： n（glycol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions had been found, that was, molar ratio of butyraldehyde to glycol was 1： 1.6, mass ratio of catalyst used to the reactants was 0.25% and reaction time was 75 min. Under these conditions, the yield of butyraldehyde glycol acetal can reach 79.74%.
