Ti6Al4V alloy was subjected to hydrothermal treatment in the concentrated Ca3(PO4)2, Ca HPO4 and Ca(H2PO4)2 solutions for bioactive surface modification. The treated samples are covered by films composed of nano-parti...Ti6Al4V alloy was subjected to hydrothermal treatment in the concentrated Ca3(PO4)2, Ca HPO4 and Ca(H2PO4)2 solutions for bioactive surface modification. The treated samples are covered by films composed of nano-particles with the size of 60-240 nm. Such film can also be grown on the strut surface of a Ti6Al4 V scaffold prepared by electron beam melting(EBM) technology. XPS analysis indicates that Ti element on the surface presents as TiO2, and Ca and P elements are in the form of calcium phosphate. XRD and Raman analyses show that the surface layer is composed of anatase TiO2 and hydroxyapatite. Potentiodynamic polarization test in a Ca-free Hank's balanced solution demonstrates that the treated sample has markedly improved corrosion resistance compared with the polished sample. The present work provides a bioactive surface modification method that is easily-operated, low-temperature, less corrosion, and applicable to porous Ti6Al4 V alloy for biomedical applications.展开更多
The serious limitations of available technologies for decontamination of wastewater have compelled researchers to search for alternative solutions. Catalytic treatment with hydrogen peroxide, which appears to be one o...The serious limitations of available technologies for decontamination of wastewater have compelled researchers to search for alternative solutions. Catalytic treatment with hydrogen peroxide, which appears to be one of the most efficient treatment systems, is able to degrade various organics with the help of powerful ·OH radicals. This review focuses on recent progress in the use of bicarbonate activated hydrogen peroxide for wastewater treatment. The introduction of bicarbonate to pollutant treatment has led to appreciable improvements, not only in process efficiency, but also in process stability. This review describes in detail the applications of this process in homogeneous and heterogeneous systems. The enhanced degradation, limited or lack of leaching during heterogeneous degradation, and prolonged catalysts stability during degradation are salient features of this system. This review provides readers with new knowledge regarding bicarbonate, including the fact that it does not always harm pollutant degradation, and can significantly benefit degradation under some conditions.展开更多
In order to produceα-calcium sulfate hemihydrate(α-CaSO4·0.5H2O)whiskers with high aspect ratios,a minor amount of CuCl2·2H2O was used as the modifying agent in the process of hydrothermal treatment of cal...In order to produceα-calcium sulfate hemihydrate(α-CaSO4·0.5H2O)whiskers with high aspect ratios,a minor amount of CuCl2·2H2O was used as the modifying agent in the process of hydrothermal treatment of calcium sulfate dihydrate(CaSO4·2H2O)precursor.The presence of 2.60×10–3 mol/L CuCl2·2H2O resulted in the increase of the aspect ratios ofα-CaSO4·0.5H2O whiskers from 81 to 253.The preferential adsorption of Cu2+on the negative{110}and{100}facets ofα-CaSO4·0.5H2O crystal structures was confirmed by EDS and XPS.And ATR-FTIR demonstrated the ligand adsorption of Cu2+on the surface ofα-CaSO4·0.5H2O whiskers.The experimental results reveal that the whiskers with high aspect ratios are attributed to the adsorption of Cu2+,which promotes the 1-D growth ofα-CaSO4·0.5H2O whiskers along the c axis.展开更多
A precursor of cobaltous dihydroxycarbonate was firstly prepared by precipitation reaction of cobalt sulfate solution and ammonium carbonate solution,and then a hydrothermal process for the precursor was conducted to ...A precursor of cobaltous dihydroxycarbonate was firstly prepared by precipitation reaction of cobalt sulfate solution and ammonium carbonate solution,and then a hydrothermal process for the precursor was conducted to obtain the spherical cobalt carbonate with low sulfur content.The experimental results show that the feeding method,final p H value of the precipitation reaction slurry and the concentration of the cobalt sulfate solution have obvious effects on the sulfur content,morphology and particle size distribution of the precursor.The sulfur content of the precursor is 0.0115 wt.%under the optimized conditions.The hydrothermal treatment with temperatures of 125-150℃can transform the precursor of cobaltous dihydroxycarbonate into spherical cobalt carbonate and decrease the sulfur content to 0.0030 wt.%in the obtained product.展开更多
The influence of intermetallic Al-Mn particles on the corrosion behavior of in-situ formed Mg-Al layered double hydroxide(Mg-Al-CO32--LDH)steam coating on AZ31 Mg alloy was investigated.The alloy was pretreated with H...The influence of intermetallic Al-Mn particles on the corrosion behavior of in-situ formed Mg-Al layered double hydroxide(Mg-Al-CO32--LDH)steam coating on AZ31 Mg alloy was investigated.The alloy was pretreated with H3PO4,HCl,HNO3or citric acid(CA),followed by hydrothermal treatment,for the fabrication of Mg-Al-LDH coating.The microstructure,composition and corrosion resistance of the coated samples were investigated.The results showed that the surface area fraction of Al-Mn phase exposed on the surface of the alloy was significantly increased after CA pretreatment,which promotes the growth of the Mg-Al-LDH steam coating.Further,the LDH-coated alloy pretreated with CA possessed the most compact surface and the maximum coating thickness among all the coatings.The corrosion current density of the coated alloy was decreased by three orders of magnitude as compared to that of the bare alloy.展开更多
General pretreatment processes of ammonia stripping and phenols solvent extraction can reduce the concentration of toxic compounds of the coal gasification wastewater for the following biological treatment. However, s...General pretreatment processes of ammonia stripping and phenols solvent extraction can reduce the concentration of toxic compounds of the coal gasification wastewater for the following biological treatment. However, some emulsified coal tar still exists in the influent and many substances in coal tar are refractory and toxic to microorganisms. This study is mainly on the removal of emulsified coal tar by acidification demulsion. The experimental results show that the acidification process of the wastewater by pure hydrochloric acid can reduce the chemical oxygen demand （COD）, total organic carbon （TOC）, total phenolics and oil about 3.1%-11.3%, 6%-- 10.8%, 5.3%--8.6% and 25.2%--57.4% respectively with pH value in the range of 4 to 7. The analysis of molecular weight distribution indicates that compounds removed from the wastewater by this process are large molecular substances. The experiment also shows that the efficiency of COD removal in the demulsion process by different acids is different and the phosphoric acid is prominent. The preserved time of the wastewater also affects the efficiency of demulsion. Small amount low-cost solid additives including kaolin and diatomite can improve the rate of coal tar sedimentation and enhance the removal efficiency of organics in the phosphoric acidification process.展开更多
Wastewater from production process of 2,3-acid was treated by adsorption usingmacroporous resin NDA-708. After only one-step treatment by resin adsorption, removalefficiency of three kinds of naphthalene chemicals was...Wastewater from production process of 2,3-acid was treated by adsorption usingmacroporous resin NDA-708. After only one-step treatment by resin adsorption, removalefficiency of three kinds of naphthalene chemicals was above 99%, removal efficiency ofCODcr was above 96% Under proper operating condition, desorption efficiency wasaround 100%. The running records of the industrial facility showed that the naphthlenechemicals in desorption effluent could be reused without obvious influence on the qualityOf the product.展开更多
基金Projects(xjj2011096,CHD2011JC001)supported by the Fundamental Research Fund for the Central Universities,ChinaProjects(50901058,51374174)supported by the National Natural Science Foundation of ChinaProject(2013JZ015)supported by the Science and Technology Program of Shaanxi Province,China
文摘Ti6Al4V alloy was subjected to hydrothermal treatment in the concentrated Ca3(PO4)2, Ca HPO4 and Ca(H2PO4)2 solutions for bioactive surface modification. The treated samples are covered by films composed of nano-particles with the size of 60-240 nm. Such film can also be grown on the strut surface of a Ti6Al4 V scaffold prepared by electron beam melting(EBM) technology. XPS analysis indicates that Ti element on the surface presents as TiO2, and Ca and P elements are in the form of calcium phosphate. XRD and Raman analyses show that the surface layer is composed of anatase TiO2 and hydroxyapatite. Potentiodynamic polarization test in a Ca-free Hank's balanced solution demonstrates that the treated sample has markedly improved corrosion resistance compared with the polished sample. The present work provides a bioactive surface modification method that is easily-operated, low-temperature, less corrosion, and applicable to porous Ti6Al4 V alloy for biomedical applications.
基金supported by the National Natural Science Foundation of China(21273086)~~
文摘The serious limitations of available technologies for decontamination of wastewater have compelled researchers to search for alternative solutions. Catalytic treatment with hydrogen peroxide, which appears to be one of the most efficient treatment systems, is able to degrade various organics with the help of powerful ·OH radicals. This review focuses on recent progress in the use of bicarbonate activated hydrogen peroxide for wastewater treatment. The introduction of bicarbonate to pollutant treatment has led to appreciable improvements, not only in process efficiency, but also in process stability. This review describes in detail the applications of this process in homogeneous and heterogeneous systems. The enhanced degradation, limited or lack of leaching during heterogeneous degradation, and prolonged catalysts stability during degradation are salient features of this system. This review provides readers with new knowledge regarding bicarbonate, including the fact that it does not always harm pollutant degradation, and can significantly benefit degradation under some conditions.
基金Project(B14034)supported by the National 111 Project,ChinaProject(2015CX005)supported by the Innovation Driven Plan of Central South University,ChinaProject(2016zzts104)supported by the Fundamental Research Funds for the Central Universities,China
文摘In order to produceα-calcium sulfate hemihydrate(α-CaSO4·0.5H2O)whiskers with high aspect ratios,a minor amount of CuCl2·2H2O was used as the modifying agent in the process of hydrothermal treatment of calcium sulfate dihydrate(CaSO4·2H2O)precursor.The presence of 2.60×10–3 mol/L CuCl2·2H2O resulted in the increase of the aspect ratios ofα-CaSO4·0.5H2O whiskers from 81 to 253.The preferential adsorption of Cu2+on the negative{110}and{100}facets ofα-CaSO4·0.5H2O crystal structures was confirmed by EDS and XPS.And ATR-FTIR demonstrated the ligand adsorption of Cu2+on the surface ofα-CaSO4·0.5H2O whiskers.The experimental results reveal that the whiskers with high aspect ratios are attributed to the adsorption of Cu2+,which promotes the 1-D growth ofα-CaSO4·0.5H2O whiskers along the c axis.
基金Project(51874372)supported by the National Natural Science Foundation of China
文摘A precursor of cobaltous dihydroxycarbonate was firstly prepared by precipitation reaction of cobalt sulfate solution and ammonium carbonate solution,and then a hydrothermal process for the precursor was conducted to obtain the spherical cobalt carbonate with low sulfur content.The experimental results show that the feeding method,final p H value of the precipitation reaction slurry and the concentration of the cobalt sulfate solution have obvious effects on the sulfur content,morphology and particle size distribution of the precursor.The sulfur content of the precursor is 0.0115 wt.%under the optimized conditions.The hydrothermal treatment with temperatures of 125-150℃can transform the precursor of cobaltous dihydroxycarbonate into spherical cobalt carbonate and decrease the sulfur content to 0.0030 wt.%in the obtained product.
基金supported by the National Natural Science Foundation of China(Nos.51601108 and 52071191)the Natural Science Foundation of Shandong Province,China(No.ZR2020ME011)。
文摘The influence of intermetallic Al-Mn particles on the corrosion behavior of in-situ formed Mg-Al layered double hydroxide(Mg-Al-CO32--LDH)steam coating on AZ31 Mg alloy was investigated.The alloy was pretreated with H3PO4,HCl,HNO3or citric acid(CA),followed by hydrothermal treatment,for the fabrication of Mg-Al-LDH coating.The microstructure,composition and corrosion resistance of the coated samples were investigated.The results showed that the surface area fraction of Al-Mn phase exposed on the surface of the alloy was significantly increased after CA pretreatment,which promotes the growth of the Mg-Al-LDH steam coating.Further,the LDH-coated alloy pretreated with CA possessed the most compact surface and the maximum coating thickness among all the coatings.The corrosion current density of the coated alloy was decreased by three orders of magnitude as compared to that of the bare alloy.
文摘General pretreatment processes of ammonia stripping and phenols solvent extraction can reduce the concentration of toxic compounds of the coal gasification wastewater for the following biological treatment. However, some emulsified coal tar still exists in the influent and many substances in coal tar are refractory and toxic to microorganisms. This study is mainly on the removal of emulsified coal tar by acidification demulsion. The experimental results show that the acidification process of the wastewater by pure hydrochloric acid can reduce the chemical oxygen demand （COD）, total organic carbon （TOC）, total phenolics and oil about 3.1%-11.3%, 6%-- 10.8%, 5.3%--8.6% and 25.2%--57.4% respectively with pH value in the range of 4 to 7. The analysis of molecular weight distribution indicates that compounds removed from the wastewater by this process are large molecular substances. The experiment also shows that the efficiency of COD removal in the demulsion process by different acids is different and the phosphoric acid is prominent. The preserved time of the wastewater also affects the efficiency of demulsion. Small amount low-cost solid additives including kaolin and diatomite can improve the rate of coal tar sedimentation and enhance the removal efficiency of organics in the phosphoric acidification process.
文摘Wastewater from production process of 2,3-acid was treated by adsorption usingmacroporous resin NDA-708. After only one-step treatment by resin adsorption, removalefficiency of three kinds of naphthalene chemicals was above 99%, removal efficiency ofCODcr was above 96% Under proper operating condition, desorption efficiency wasaround 100%. The running records of the industrial facility showed that the naphthlenechemicals in desorption effluent could be reused without obvious influence on the qualityOf the product.
