A sulfonated poly（ether ether ketone） （SPEEK） membrane with a fairly high degree of sulfonation （DS） can swell excessively and even dissolve at high temperature. To solve these problems, insolvable functionalize...A sulfonated poly（ether ether ketone） （SPEEK） membrane with a fairly high degree of sulfonation （DS） can swell excessively and even dissolve at high temperature. To solve these problems, insolvable functionalized silica powder with sulfonic acid groups （SiOx-S） was added into the SPEEK matrix （DS = 55.1%） to prepare SPEEK/ SiOx-S composite membranes. The decrease in both the swelling degree and the methanol permeability of the membranes was a dose-dependent result of addition of the SiOx-S powder. Pure SPEEK membrane swelled 52.6% at 80℃, whereas the SPEEK/SiOx-S （15%, by mass） membrane swelled only 27.3% at the same temperature. From room temperature to 80℃, all SPEEK/SPEEK/SiOx-S composite membranes had methanol permeability of about one order of magnitude lower than that ofNafion115. Compared with pure SPEEK membranes, the addition of the SiOx-S powder not only leads to higher proton conductivity, but also increases the dimensional stability at higher temperatures, and greater proton conductivity can be achieved at higher temperature. The SPEEK/SiO4-S （20%, by mass） membrane could withstand temperature up to 145℃, at which in 100% relative humidity （RH） its proton conductivity exceeded slightly that of Nafion 1 15 membrane and reached 0.17 S·cm^-1, while pure SPEEK membrane dissolved at 90℃. The SPEEK/SiOx-S composite membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.展开更多
The present work studied fuel consumption through experiments on a diesel engine. In order to obtain lower BSFC （brake specific fuel consumption）, DME （dimethyl ether） is heated and introduced into air intake, tog...The present work studied fuel consumption through experiments on a diesel engine. In order to obtain lower BSFC （brake specific fuel consumption）, DME （dimethyl ether） is heated and introduced into air intake, together with fueling emulsified fuel to diesel engine. Results show that BSFC can decrease about 10% and diesel fuel consumption alone can decrease 18%. High saving rate of BSFC up to 10% is also acquired using ethanol instead of DME. To achieve high saving rate of BSFC, the heating temperature of about 1000 K is needed for DME operation, while the diesel engine exhaust temperature of about 750 K is suitable for ethanol. Hydrogen produced in DME or ethanol pyrolysis and the combustion characters of emulsified fuel are considered as main reasons for the excellent fuel saving. Besides, the technique adopted in the present work is extremely easy to be utilized, and may be firstly adopted on diesel engines for power plants, trains, and ships etc.展开更多
基金Supported by the State Key Development Program for Basic Research of China （2008CB617502）, the National Natural Science Foundation of China （20606025）, and Program for Changjiang Scholars and Innovative Research Team in University of China （IRT0641）.
文摘A sulfonated poly（ether ether ketone） （SPEEK） membrane with a fairly high degree of sulfonation （DS） can swell excessively and even dissolve at high temperature. To solve these problems, insolvable functionalized silica powder with sulfonic acid groups （SiOx-S） was added into the SPEEK matrix （DS = 55.1%） to prepare SPEEK/ SiOx-S composite membranes. The decrease in both the swelling degree and the methanol permeability of the membranes was a dose-dependent result of addition of the SiOx-S powder. Pure SPEEK membrane swelled 52.6% at 80℃, whereas the SPEEK/SiOx-S （15%, by mass） membrane swelled only 27.3% at the same temperature. From room temperature to 80℃, all SPEEK/SPEEK/SiOx-S composite membranes had methanol permeability of about one order of magnitude lower than that ofNafion115. Compared with pure SPEEK membranes, the addition of the SiOx-S powder not only leads to higher proton conductivity, but also increases the dimensional stability at higher temperatures, and greater proton conductivity can be achieved at higher temperature. The SPEEK/SiO4-S （20%, by mass） membrane could withstand temperature up to 145℃, at which in 100% relative humidity （RH） its proton conductivity exceeded slightly that of Nafion 1 15 membrane and reached 0.17 S·cm^-1, while pure SPEEK membrane dissolved at 90℃. The SPEEK/SiOx-S composite membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.
文摘The present work studied fuel consumption through experiments on a diesel engine. In order to obtain lower BSFC （brake specific fuel consumption）, DME （dimethyl ether） is heated and introduced into air intake, together with fueling emulsified fuel to diesel engine. Results show that BSFC can decrease about 10% and diesel fuel consumption alone can decrease 18%. High saving rate of BSFC up to 10% is also acquired using ethanol instead of DME. To achieve high saving rate of BSFC, the heating temperature of about 1000 K is needed for DME operation, while the diesel engine exhaust temperature of about 750 K is suitable for ethanol. Hydrogen produced in DME or ethanol pyrolysis and the combustion characters of emulsified fuel are considered as main reasons for the excellent fuel saving. Besides, the technique adopted in the present work is extremely easy to be utilized, and may be firstly adopted on diesel engines for power plants, trains, and ships etc.
