Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through anal...Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through analyzing both advantages and disadvantages of some technologies such as mining with stowing, partial extraction and grouting in separated beds of overburden, we used the principle of load replacement and propose a “3-step mining” method, a new pattern of controlling mining subsidence, which consists of： strip mining, i.e. grouting to fill and consolidate the caving zone and retained strip pillar mining. The mechanism of controlling mining subsidence by using the “3-step mining” pattern is analyzed. The effect of the control is numerically simulated. The preliminary analysis shows that the “3-step mining” can effectively control ground subsidence and deformation. By using this method, the ground subsidence factor can be controlled to a value of about 0.25. Coal recovery can reach 80%-90%. Coal mining without removing surface buildins can be realized and the economic loss resultin from round subsidence can be greatly reduced.展开更多
Based on the theory of coordinating action of building ground, foundation and structure, this paper presents a modified method for calculating additional stresses on buildings in mining areas by considering the joint ...Based on the theory of coordinating action of building ground, foundation and structure, this paper presents a modified method for calculating additional stresses on buildings in mining areas by considering the joint effect of cur- vature deformation and horizontal deformation on buildings. It points out that for buildings over the coal pillar, it is ad- visable to soften the intermediate ground of buildings when they are affected by mining. For buildings over the goaf, it is preferable to soften the ground at both ends of buildings. In order to enhance the ability of a building to resist tensile deformation, the key measure is to reinforce the bottom foundation of the building. In addition, the concept of “angle of break of building” is proposed. It is because of this angle that the protecting coal pillar is left, which is a better solution than prevailing solutions The findings provide a more scientific basis for mining under buildings.展开更多
No.4326 super-wide panel of Wangzhuang Coal Mine ( in which the fully-mechanized top-coal caving longwall mining method was used) was monitored for dynamic characteristic of surface movement. The dynamic surface movem...No.4326 super-wide panel of Wangzhuang Coal Mine ( in which the fully-mechanized top-coal caving longwall mining method was used) was monitored for dynamic characteristic of surface movement. The dynamic surface movement in and after mining was predicted by using the Mining Subsidence Prediction System. The results indicate that after mining, the surface above the super-wide panel reaches a state of full subsidence, making the No.309 national highway above the panel be located on the flat bottom of the subsidence basin so that the influence of mining activity in both sides of 4326 panel on the national highway is the smallest.展开更多
Hard coal mining in the German Ruhr district has a tradition of more than 200 years. Starting in the south near the river Ruhr with mining of seams near to the surface, mining wandered to the north with coal seams dee...Hard coal mining in the German Ruhr district has a tradition of more than 200 years. Starting in the south near the river Ruhr with mining of seams near to the surface, mining wandered to the north with coal seams deeper and deeper. In the same way all environmental effects of mining wandered from south to north, as there are abandoned mining sites, contaminated areas, burning mining dumps, subsided areas and gas accesses at day ground. This all happened in a very high populated area with more than four million inhabitants. Therefore Germany has a long tradition in solving environmental problems of mining activities. The very good interaction of mine authority, mining companies and the mine workers’ union is the main reason why the problems of decreasing mining activities in Germany were solved without economic, environmental or social hazards.展开更多
Brought forward the conception of conventional MS monitoring, and described the different monitoring ranges of frequencies and magnitude about earthquake and conventional MS monitoring and MS monitoring in detail. The...Brought forward the conception of conventional MS monitoring, and described the different monitoring ranges of frequencies and magnitude about earthquake and conventional MS monitoring and MS monitoring in detail. The monitoring results received by the Polish ARAMIS M/E monitoring system and the monitodng instrument designed by the author＇s research group in the same colliery show that the events amount received by conventional MS monitoring instrument which is only about 1/20 of the MS monitoring events, and it can only describe violent activity in larger range and be only applied to monitor hard and thick surrounding rock under mine. Meanwhile the small scale and high precision MS monitoring instrument can receive a lot of low rock fracturing signals, which can actualize the rock movement inversion and precisely descdbe 4-D changes of stress fields, and depend on the observed results we can determine the upper limits of mining and describe S-shaped strata spatial structure and high stress field in Iongwall face surrounded by two sides mined areas.展开更多
We combined the similar simulation with numerical simulation to analyze the movement and deforma- tion features of overlying strata caused by paste backfill mining, study the movement and deformation laws of the overl...We combined the similar simulation with numerical simulation to analyze the movement and deforma- tion features of overlying strata caused by paste backfill mining, study the movement and deformation laws of the overlying strata in paste backfill mining, structural movement of the stope strata as well as the stope stress distribution laws. Furthermore, authors also explored the key factors to the movement and deformation of the overlying strata in paste backfill mining. The results indicate that a caving zone existed in the bending zone only in the overlying strata of the paste backfill mining. Compared with the roof caving mining, the degree of stress concentration and area of influence in the paste filling stope were apparently smaller. And the degree of destruction and area of the overlying strata decreased prominently. Also, there was no apparent strata behavior in the working face. Lastly, the filling ratio was the key to control the movement and deformation of the overlying strata. Combined with a specific engineering example, the author proved the reliability of the simulation results and provided a theoretical basis for the further extension of the paste backfill mining.展开更多
文摘Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through analyzing both advantages and disadvantages of some technologies such as mining with stowing, partial extraction and grouting in separated beds of overburden, we used the principle of load replacement and propose a “3-step mining” method, a new pattern of controlling mining subsidence, which consists of： strip mining, i.e. grouting to fill and consolidate the caving zone and retained strip pillar mining. The mechanism of controlling mining subsidence by using the “3-step mining” pattern is analyzed. The effect of the control is numerically simulated. The preliminary analysis shows that the “3-step mining” can effectively control ground subsidence and deformation. By using this method, the ground subsidence factor can be controlled to a value of about 0.25. Coal recovery can reach 80%-90%. Coal mining without removing surface buildins can be realized and the economic loss resultin from round subsidence can be greatly reduced.
基金Project 50474064 supported by the National Natural Science Foundation of China
文摘Based on the theory of coordinating action of building ground, foundation and structure, this paper presents a modified method for calculating additional stresses on buildings in mining areas by considering the joint effect of cur- vature deformation and horizontal deformation on buildings. It points out that for buildings over the coal pillar, it is ad- visable to soften the intermediate ground of buildings when they are affected by mining. For buildings over the goaf, it is preferable to soften the ground at both ends of buildings. In order to enhance the ability of a building to resist tensile deformation, the key measure is to reinforce the bottom foundation of the building. In addition, the concept of “angle of break of building” is proposed. It is because of this angle that the protecting coal pillar is left, which is a better solution than prevailing solutions The findings provide a more scientific basis for mining under buildings.
文摘No.4326 super-wide panel of Wangzhuang Coal Mine ( in which the fully-mechanized top-coal caving longwall mining method was used) was monitored for dynamic characteristic of surface movement. The dynamic surface movement in and after mining was predicted by using the Mining Subsidence Prediction System. The results indicate that after mining, the surface above the super-wide panel reaches a state of full subsidence, making the No.309 national highway above the panel be located on the flat bottom of the subsidence basin so that the influence of mining activity in both sides of 4326 panel on the national highway is the smallest.
文摘Hard coal mining in the German Ruhr district has a tradition of more than 200 years. Starting in the south near the river Ruhr with mining of seams near to the surface, mining wandered to the north with coal seams deeper and deeper. In the same way all environmental effects of mining wandered from south to north, as there are abandoned mining sites, contaminated areas, burning mining dumps, subsided areas and gas accesses at day ground. This all happened in a very high populated area with more than four million inhabitants. Therefore Germany has a long tradition in solving environmental problems of mining activities. The very good interaction of mine authority, mining companies and the mine workers’ union is the main reason why the problems of decreasing mining activities in Germany were solved without economic, environmental or social hazards.
基金Supported by the National Natural Science Foundation of China and Project（2007-04） 0pen Fund of State Key Laboratory of Coal Resources and Safe Mining （40674017, 50534080）
文摘Brought forward the conception of conventional MS monitoring, and described the different monitoring ranges of frequencies and magnitude about earthquake and conventional MS monitoring and MS monitoring in detail. The monitoring results received by the Polish ARAMIS M/E monitoring system and the monitodng instrument designed by the author＇s research group in the same colliery show that the events amount received by conventional MS monitoring instrument which is only about 1/20 of the MS monitoring events, and it can only describe violent activity in larger range and be only applied to monitor hard and thick surrounding rock under mine. Meanwhile the small scale and high precision MS monitoring instrument can receive a lot of low rock fracturing signals, which can actualize the rock movement inversion and precisely descdbe 4-D changes of stress fields, and depend on the observed results we can determine the upper limits of mining and describe S-shaped strata spatial structure and high stress field in Iongwall face surrounded by two sides mined areas.
基金supported by the National Natural Science Foundation of China (No. 50774077)the Special Funds of Universities Outstanding Doctoral Dissertation (No. 200760)+1 种基金the Independent Research Funding of the State Key Laboratory of Coal Resources and Mine Safety (No. SKLCRSM10X02)the Fundamental Research Funds for the Central Universities (Nos. 2010QNA31 and2010QNA32)
文摘We combined the similar simulation with numerical simulation to analyze the movement and deforma- tion features of overlying strata caused by paste backfill mining, study the movement and deformation laws of the overlying strata in paste backfill mining, structural movement of the stope strata as well as the stope stress distribution laws. Furthermore, authors also explored the key factors to the movement and deformation of the overlying strata in paste backfill mining. The results indicate that a caving zone existed in the bending zone only in the overlying strata of the paste backfill mining. Compared with the roof caving mining, the degree of stress concentration and area of influence in the paste filling stope were apparently smaller. And the degree of destruction and area of the overlying strata decreased prominently. Also, there was no apparent strata behavior in the working face. Lastly, the filling ratio was the key to control the movement and deformation of the overlying strata. Combined with a specific engineering example, the author proved the reliability of the simulation results and provided a theoretical basis for the further extension of the paste backfill mining.
