血站检验科检验标本的采集与处理

献血者血液检测的大部分项目都是围绕输血传染病的筛选而展开的,而检验标本的采集与处理直接关系到血液检测结果的准确性和可靠性,为保证给临床提供安全、有效的血液制品,必须正确、规范化地采集和处理血液标本。

Study on the Influencing Factors and the Root Mechanism in Cutting Process of Prunus humilis(Bge). Sok

A procedure for cutting Prunus humilis（Bge）. Sok was comprehensively studied in this paper. It was found that the key factors involved in this procession were medium, rooting accelerator, concentration of rooting accelerator and type of shoot. The results showed that send was used as mediums; Treatment with 1 000 mg/L AST rooting powder No. 2 and semi-woody shoots were the optimal materials for cutting, and the rooting rate reached 88.1%. Anatomical study on rooting of Prunus hum#is（Bge）. Sok cutting has been carded out by the paraffin section method. The observation result shows that the adventitious root primordium of Prunus humili$（Bge）. Sok cutting belongs to the type of induced root primordium. The adventitiousroot primordium originates from the cross region of vascular cambium and pith rays.

Design and Research of Information Processing System Based on Mix Platform

Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.

飞行试验遥测地面站(FTTGS)方案和 QUAD 7系统(上)

飞行试验遥测地面站(FTTGS)由 SNEC 遥测接收子系统;QUAD7实时数据采集/处理子系统和 VAX4300主计算机子系统三大部分组成。遥测接收子系统包括 S 波段自动跟踪天线2通道接收机全向天线,校准天线等众多部件,跟踪速≥30°/s。瞄准精度≤0.1°,工作风速达100km/h;VAX4300计算机系统提供了8VUPS的 CPU 性能。最大主存容量为224MB,最大海量存贮器容量为28GB,I/O 吞吐量高达11.2MB/S;QUAD 7子系统是一个先进的,高性能的数据采集/处理系统,能采集、处理、分配 PCM、PCM-1553、MIL-STD-1553,并行数字,数字离散量和模似量等各类数据,能模拟和监视数据流,能提高可编程的处理,快速建库、编辑动态数据库。文中对各子系统的结构、工作方式、技术规范和有关问题作了介绍,附结构图2幅。列出了有关数据。

Intelligent Control and Maintenance Man-agement Integrated System Based on Multi-Agents for Coal-Preparation Plant

This paper discusses the progress of computer integrated processing （CIPS） of coal-preparation and then preserits an intelligence controlled production-process, device-maintenance and production-management system of coal- preparation based on multi-agents （IICMMS-CP）. The construction of the IICMMS-CP, the distributed network control system based on live intelligence control stations and the strategy of implementing distributed intelligence control system are studied in order to overcome the disadvantages brought about by the wide use of the PLC system by coaipreparation plants. The software frame, based on a Multi-Agent Intelligence Control and Maintenance Management integrated system, is studied and the implemention methods of IICMMS-CP are discussed. The characteristics of distributed architecture, cooperation and parallel computing meet the needs of integrated control of coal-preparation plants with large-scale spatial production distribution, densely-related processes and complex systems. Its application further improves the reliability and precision of process control, accuracy of fault identification and intelligence of production adjustment, establishes a technical basis for system integration and flexible production. The main function of the system has been tested in a coal-preparation plant to good effect in stabilizing product quality, improving efficiency and reducing consumption.

Methods to increase the depth and precision of transient Rayleigh wave exploration

In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large amount of experiments. By reducing the group interval, the low frequency signal are enhanced instead of been attenuated. Fur-thermore, to solve the problem that the precision of Rayleigh wave exploration method count much to the signal-to-noise ratio, some preprocessing methods were put forward. By using zero shift rectifying, digital F-K filtering and cutting, noises can be effectively eliminated.

Discuss on High Speed Data Acquisition and Signal Processing

In order to realize the high speed data acquisition and fast Fourier analysis, the paper put forward a kind of high speed data acquisition and analysis system based on FPGA, the system uses Cyclone series FPGA with high-speed A/D converter, and use the fast Fourier custom analysis nucleation of Altera company, using the standard TCP/IP protocol communication with PC, match up the master machine based on Matlab GUI analysis software. We experiment high speed data acquisition and fast Fourier analysis for a plurality of groups of high frequency analog signals, at the same time the results display on the computer. The experimental results validate the fast Fourier analysis theory, and has realized the low cost, high performance data acquisition and analysis of the complete system design.

A Laser Ranging System Using Chaotic Light

A novel laser ranging system using chaotic laser as probe light source is designed and presented.The system is made up of five components:chaotic light source,transmitter,receiver,data acquisition unit and data processing unit.Chaotic light is generated by an 808 nm,500 mW,single-mode laser diode with optical feedback cavity.Single target detection and multi-target detection are experimentally realized by correlating the chaotic reference light and the reflected or backscattered probe light.The performances,including the resolution of 18 cm within at least 130 m range and the sensitivity of-20 dB,are achieved and analyzed.

Design of EPS Testing System Based on LabVIEW2012

The article designed a set of automatic test system of automobiles EPS based on LabVIEW, which can collect current signal and torque signal when emergency braking. It consists of two parts： hardware and software. Hardware includes sensors,condition circuits, data acquisition card and your computer. Software-related programs, including an analysis of acquisition signal processing and storage display.The system is stable and reliable by contrast verification.

Signal Acquisition and Processing Method Using Sector SSPA

Self scanning photodiode array (SSPA) is a kind of solid state imaging sensor. The signal processing method using a special sector SSPA was investigated. Based on the principle and characteristics of SSPA, a signal acquisition and processing method controlled by computer was introduced. The amplification of weak signal, the matching of time sequence, the fast peak holding with low leakage, the high speed A/D conversion and nonlinear correction were discussed. This method can acquire the peak signal of every ring of sector SSPA with high accuracy and in real time. It can be used to detect the distribution of space light energy.

Dynamic evaluation of traffic flows on city roads

This paper presents an analysis of the random fluctuations, deferred conduction effect and periodicity of road traffic based on the basic features of road networks. It also discusses the limitations of road network evaluation theories based on road "V/C". In addition, it proposes a set of theoretical and technical methods for the real-time evaluation of traffic flows for entire road networks, and for solving key technical issues, such as real-time data collection and processing in areas with no blind zones, the spatial-temporal dynamic analysis of road network traffic, and the calibration of key performance index thresholds. It also provides new technical tools for the strategic transportation planning and real-time diagnosis of road traffic. The new tools and methodology presented in this paper are validated using a case study in Beijing.

Study on Anti-Disturbance and High-Resolution Shallow Seismic Exploration of Active Faults in Urban Regions

The significance of detection of urban active faults and the general situation concerning detection of urban active faults in the world are briefly introduced. In a brief description of the basic principles of anti-disturbance and high-resolution shallow seismic exploration, the stress is put on the excitation of seismic sources, the performance of digital seismographs, receiving mode and conditions, geometry as well as data acquisition, processing and interpretation in the anti-disturbance and high-resolution shallow seismic exploration of urban active faults. The study indicates that a controlled seismic source with a linear or nonlinear frequency-conversion scanning function and the relevant seismographs must be used in data acquisition, as well as working methods for small group interval, small offset, multi-channel receiving, short-array and high-frequency detectors for receiving are used. Attention should be paid to the application of techniques for static correction of refraction, noise suppressing, high-precision analysis of velocity, wavelet compressing, zero-phasing of wavelet and pre-stacking migration to data processing and interpretation. Finally, some cases of anti-disturbance and high-resolution shallow seismic exploration of urban active faults are present in the paper.

The Design and Implementation of Multi-user Data Sharing Platform for Remote Monitoring System Based on Virtual Instruments

Remote data monitoring system which adopts virtual instrument usually applies data sharing, acquisition and remote transmission technology via internet. It is able to finish concurrent data acquisition and processing for multi-user and multi-task and also build a personalized virtual testing environment for more people but with fewer instruments. In this paper, we＇ 11 elaborate on the design and implementation of information sharing platform through a typical example of how to build multi-user concurrent virtual testing environment based on the virtnal software LabVIEW.

The Design and Construction of Jiangxi Red Tourism Resource E-C/C-E Bilingual Parallel Corpus

On the basis of description of the necessity in construction of the Jiangxi red tourism resource E-C/C-E bilingual parallel corpus, this paper discusses the design and construction of the corpus. In its design, it describes the general design and the framework of the corpus, then it describes its construction including data collection, the standard for the sorted data, data selection, data digitalization, data tagging and data aligning. With the construction, it will not only realize purposes and functions of the corpus, but also provide others with ways or means to use the corpus and to establish such kind of corpus.

Standardized pod collection time, pod length and pre-sowing treatment of Albizia lebbeck at terai zone of West Bengal, India

Three pod lengths （ 10 cm, 10–20 cm and 20 cm） and 13 pre-sowing treatments were considered with four dates of collection （9 February, 19 February, 1 March and 11 March） to investigate their effect on germination rate and growth of seedlings of Albizia lebbeck （L.） Benth. at Pundibari, West Bengal, India. The best time of pod collection was on 19 February as the germination rate of the seeds collected on this date was 92.5% without requiring any pre-sowing treatments. This clearly indicated that the seeds collected on 19 February were non-dormant, viable and physiologically mature. Significantly better seedling growth was also obtained when the seeds were sown on 19 February which was extracted from pods of length 10-20 cm. Application of thio-urea as a pre-treatment did not significantly enhanced seed germination rate, but its application in lower concentration （100 μL·L-1） resulted in better seedling growth and development.

Design and Implementation of Data Acquisition System based on Linux Platform

This paper introduces the hardware structure and software design of data acquisition system based on embedded Linux. In order to improve the real-time response performance and the ability of multi task for system, using ARM9 microprocessor technology in hardware, and transplant the Linux operating system, and the system reliability and scalability can be improved. The design makes full use of the characteristics of embedded Linux. The system software module have data acquisition module, data processing module, data communication module and data diagnostic module. The embedded Linux operating system is transplant into data acquisition system, that can accelerate the development of the system and convenient to future expansion functions, improve the observation data timeliness and accuracy, and can realize automation observation.

Design of DSP-based Embedded Video Remote Monitoring System

Presented is a scheme of an embedded video remote monitoring system based on TMS320DM642. Using DM642 as the data processing core, the remote monitoring system is composed of video acquisition module, video processing module and communication module, which gives an implementation of class/mini driver module in DSP/BIOS integrated developing environment and also a common task module in application layer is achieved. The system realizes the entire functions of the analog video signal acquisition, H.264 video coding and Internet transmission. It provides the general connection for the future development and has good flexibility and extendibility. The system uses a modular design and overall development of programming methods to improve the efficiency of system development.

Digital Image Processing Methods for Bridge Coating Management and Their Limitations

Accurate and objective rust defect assessment is required to maintain good quality steel bridge coating surfaces and make a decision whether a bridge shall completely or partially be repainted. For more objective rust defect recognition, digital image recognition methods have been developed for the past few years and they are expected to replace or complement conventional painting inspection methods. Efficient image processing methods are also essential for the successful implementation of steel bridge coating warranty contracting where the owner, usually a state agency, and the contractor inspect steel bridge coating conditions regularly and decide whether additional maintenance actions are needed based on the processed data. There are two approaches to develop automated rust defect recognition methods： applying a statistical method or an artificial intelligence technique. This paper presents the application of previously developed image processing methods for defect evaluations on a bridge coating surface and discusses their limitations under three environmental conditions which are often encountered while acquiring digital images.