Texture and grain boundary character distribution of Cu interconnects with different line width for as-deposited and annealed conditions were measured by EBSD. All specimens appear mixed texture and （111） texture is...Texture and grain boundary character distribution of Cu interconnects with different line width for as-deposited and annealed conditions were measured by EBSD. All specimens appear mixed texture and （111） texture is the dominate component.As-deposited interconnects undergo the phenomenon of self-annealing at RT,in which some abnormally large grains are found. Lower aspect ratio of lines and anneal treatment procured larger grains and stronger （111） texture. Meanwhile, the intensity proportion of other textures with lower strain energy to （111） texture is decreased. As-deposited specimens reveal （111）（112？ and （111） （231） components, （111） （110） component appeared and （111） （112？ and （111） （231） components were developed during the annealing process. High angle boundaries are dominant in all specimens, boundaries with a misorientation of 55°-60° and ∑3 ones in higher proportion, followed by lower boundaries with a misorientation of 35°-40° and 29 boundaries. As the aspect ratio of lines and anneal treatment increase,there is a gradual in- crement in ∑3 boundaries and a decrease in ∑9 boundaries.展开更多
There is an increasing trend to apply GNSS continuous observation of short baselines to the monitoring of engineering works, such as bridges and dams, for their structural analysis and safety control. In the case of l...There is an increasing trend to apply GNSS continuous observation of short baselines to the monitoring of engineering works, such as bridges and dams, for their structural analysis and safety control. In the case of large dams, one important application of the GNSS continuous observation is thc establishment of early warning systems that demand accurate, frequently updated information and where the analysis of the baseline time series, in order to separate signal from noise is mandatory. The paper presents a study on the performance of linear filters of the asymmetric moving average type to smooth baseline time series. The transfer function of the filter is adopted as a smoothing criterion to choose an adequate order for the moving average, in face of the spectral density function of the baseline time series. Onc series of measurements of a short test baseline （325 m）, materialized in the campus of the National Laboratory for Civil Engineering, is used as an example of the proposed strategy.展开更多
文摘Texture and grain boundary character distribution of Cu interconnects with different line width for as-deposited and annealed conditions were measured by EBSD. All specimens appear mixed texture and （111） texture is the dominate component.As-deposited interconnects undergo the phenomenon of self-annealing at RT,in which some abnormally large grains are found. Lower aspect ratio of lines and anneal treatment procured larger grains and stronger （111） texture. Meanwhile, the intensity proportion of other textures with lower strain energy to （111） texture is decreased. As-deposited specimens reveal （111）（112？ and （111） （231） components, （111） （110） component appeared and （111） （112？ and （111） （231） components were developed during the annealing process. High angle boundaries are dominant in all specimens, boundaries with a misorientation of 55°-60° and ∑3 ones in higher proportion, followed by lower boundaries with a misorientation of 35°-40° and 29 boundaries. As the aspect ratio of lines and anneal treatment increase,there is a gradual in- crement in ∑3 boundaries and a decrease in ∑9 boundaries.
文摘There is an increasing trend to apply GNSS continuous observation of short baselines to the monitoring of engineering works, such as bridges and dams, for their structural analysis and safety control. In the case of large dams, one important application of the GNSS continuous observation is thc establishment of early warning systems that demand accurate, frequently updated information and where the analysis of the baseline time series, in order to separate signal from noise is mandatory. The paper presents a study on the performance of linear filters of the asymmetric moving average type to smooth baseline time series. The transfer function of the filter is adopted as a smoothing criterion to choose an adequate order for the moving average, in face of the spectral density function of the baseline time series. Onc series of measurements of a short test baseline （325 m）, materialized in the campus of the National Laboratory for Civil Engineering, is used as an example of the proposed strategy.
