谈谈RFID技术的应用

本文简述了RFID技术应用发展现状,着重介绍了系统应用的基本原理、系统组成、分类形式及选择标准和性能评估等方面内容。结合在称重物流应用的实践经验,列举了几种系统应用解决方案。

Characteristics and formation of high quality reservoirs in sediment gravity flows of Gangzhong area,Huanghua depression

Reservoirs can be developed in the sediment gravity flows.However,high quality reservoirs are found widespread in sediment gravity flows of Gangzhong area,Huanghua depression,Bohai Bay Basin,East China.Characteristics and formation of these reservoirs are key problems to be solved.Through comprehensive analysis of thin section petrography,scanning electron microscopy and X-ray diffraction,two distinct rules were obtained.1) These high quality reservoirs have apparent characteristics:lithology consists mainly of medium-fine grained sands; moderately-well sorted and rounded; intergranular pores dominating >70% of the entire pores,surface per unit pore volume reaches 15%; average porosity is 21% and average permeability is 55×10-3 μm2.2) Types of sedimentary microfacies and dissolution strongly control on the formation of high quality reservoirs.Main channels and sandy braided bars have the best reservoir properties.Because that sediments are mainly medium-fine grained sands in high-energy environments.The favorable primary porosity and permeability may promote calcite cementation and help to produce more secondary pores.Besides,at the depth of 2500-3200 m,basically matching threshold of oil generation,organic acid expelled when organic matter became mature,and H+ released during clay mineral transformation.These both result in the dissolution of calcite cements and create large volume pores,then physical properties improve correspondingly.Moreover,deep hydrothermal fluid intrusion may also have impacts on the development of secondary pores.

Assessment of heavy metals in sediment in a heavily polluted urban river in the Chaohu Basin, China

The Nanfei River （Anhui Province, China） is a severely polluted urban river that flows into Chaohu Lake. In the present study, sediments were collected from the river and analyzed for their heavy metal contents. Multivariate statistics and the fuzzy comprehensive assessment method were used to determine the sources of pollution, the current pollution status, and spatial and temporal variations in heavy metal pollution in sediments. The concentrations of arsenic （As）, cadmium （Cd）, chromium （Cr）, copper （Cu）, mercury （Hg）, nickel （Ni）, lead （Pb）, and zinc （Zn） in sediments ranged from 5.67-113, 0.08-40.2, 41.6-524, 15.5-460, 0.03-4.84, 13.5-180, 18.8-250, and 47.9-1 996 mg/kg, and the average concentrations of each metal were 1.7, 38.7, 1.8, 5.5, l 8.8, 1.3, 2.5, and 11.1 times greater than the background values, respectively. Multivariate statistical analysis demonstrated that Hg, Cu, Cr, Cd, and Ni may have originated from industrial activities, whereas As and Pb came from agricultural activities. The fuzzy comprehensive assessment method, based on the fuzzy mathematics theory, was used to obtain a detailed assessment of the sediment quality in the Nanfei River watershed. The results indicated that the pollution was moderate in the downstream tributaries of the Nianbu and Dianbu Rivers, but was severe in the main channel of the Nanfei River and in the upstream tributaries of the Sill and Banqiao Rivers. Therefore, sediments in the Nanfei River watershed are heavily polluted and urgent measures should be taken to remedy the status.

Characterization of suspended solids and particle-bound heavy metals in a first flush of highway runoff

To investigate the dynamic characteristics of total suspended solids (TSS) and their particle-bound heavy metals in a first flush, the runoff sampling together with its flow rate measuring was conducted for three rainfall events at outfalls of highway in Shanghai from June to September 2007. Field samples were analyzed to determine the concentrations of TSS and particle-bound heavy metals, such as Zn, Pb, and Cu. Results show that the wash off behavior of TSS under varying runoff rate condition can be explained by different antecedent dry weather period (ADWP). Contribution of fine fraction (<45 μm) to TSS was generally higher than that of coarse fraction (>45 μm). When the runoff flow increased obviously, a significant contribution of the coarse fraction was observed for a certain rainfall events with long antecedent dry weather condition. The changes of total metals concentration and particle-bound metal concentrations were strongly dependent on the TSS variation. TSS was generally well correlated with most particulate-bound heavy metals. Of the heavy metals, the concentration of Zn was found considerably high and that of Pb was significantly low at North Zhongshan 2 Road, in Shanghai, China, but they are still within the range reported in the literature. Fluctuation of heavy metal contents in the coarse fraction during a first flush period was more significant compared with that in the fine fraction. The results will assist in the development of effective control strategies to minimize heavy metals and solids in highway runoff.

Aerosol Removal by Emergency Spray in PWR Containment

During the course of a hypothetical severe accident in a nuclear Pressurized Water Reactor （PWR）, containment reactor is pressurized by steam and hydrogen released from a primary circuit breach and distributed into the containment according to convective flows and steam wall condensation. In addition, core degradation leads to fission products released into the containment. Water spraying is used in the containment as mitigation means in order to reduce pressure, to remove fission products and to enhance the gas mixing in case of presence of hydrogen. This paper presents results of the TOSQAN aerosol program undertaken by the Institute de Radioprotection et de Sfiret6 Nucl6aire （IRSN） devoted to study the aerosol removal by a spray, for typical accidental thermal hydraulic conditions in PWR containment. The TOSQAN facility is a large enclosure devoted to simulate typical accidental thermal hydraulic flow conditions in nuclear PWR containment.

Drifting Sand Endangering Gezira Irrigation Scheme in Central Sudan, History and Impact

This study was carried out at Gezira area in Central Sudan that lies between longitude 32° and 32° 50＇ and latitude 14° and 14°15＇. It dealt with the history of the sand, its source and rate of movement towards Gezira scheme and monitored the trend of blowing sand over 10 years. To find out the origin of drifting sand, sand samples were collected from the sandy area west to the White Nile and from the study area. Heavy minerals analysis was carried out on these samples and its mineral assemblage was matched with the mineral of both sand at western bank of the White Nile and the Blue Nile. To picture the trend of moving sand, Multispectral Scanning System （MSS, 1975）, and Thematic Map （TM, 1985） were used to delineate the sandy areas and their trend with time. The rate of the blowing sand was quantified using Bottemane sand catcher. The heavy mineral results showed that the mineral of the drifting sand in the study area are quite similar to the sand of sand dune west to the White Nile indicating the same origin. The sand was transported by southern and southwestern winds through a corridor across the White Nile to its eastern bank, where the most likely water transported sediment was reworked by wind and transported further to the northeast. Between 1972 and 1985, the sand invaded the area at an average rate of about 30 km2 per year and map of 1985 demonstrated a corridor across the White Nile for sand movement. The area was subject to 7 days sand storm with an average of 35 kg/m.d and in summer time, the average amount of moving sand was about 28 kg/m.d. These results demonstrated the future hazard of drifting sand and its impact, which has to be tackled immediately to protect Gezira scheme.

东北振兴的产业重构与空间布局--基于振兴目标、资源优势和物流成本的综合分析

20世纪90年代前,东北地区一直是共和国最重要的工业基地、能源基地和粮食基地,经济相对发达,对国家贡献巨大。随着我国市场经济的日益完善和工业化进程的不断加快,过度依赖工业化的传统思维、"重物流"工业发展区位优势的丧失、工业产能过剩时代的到来,导致东北地区经济日显疲态。应以系统思维和全域视野制定振兴策略,对标国家东北振兴战略目标,规划建设若干覆盖全区域、涵盖全产业和惠及全人口的产业区、经济带、城市群等功能区带,以国家战略需求产业、优势资源产业、"轻物流"产业和"零物流"后工业产业的发展,推动东北全面振兴、全方位振兴。

Assessment of Heavy Metal Pollution in Estuarine Surface Sediments of Tangxi River in Chaohu Lake Basin

A total of 30 surface sediments samples from the estuary wetland of the Tangxi River, Chaohu Lake Basin were obtained and tested. Enrichment factor （EF） and geoaccumulation index （Igeo） as well as multivariate statistical analysis methods including Factor Analysis （FA） and Hierarchical Cluster Analysis （HCA） were applied for the assessment of heavy metal pollution in surface sediments. The results of EF values show that the pollution of copper （Cu） and cadmium （Cd） occurs in the estuarine sediments, and that zinc （Zn）, lead （Pb） and chrome （Cr） may originate from crustal materials or natural weathering process. The mean EF values of the five heavy metals are in the decreasing order： Cu〉Cd）Zn〉Pb〉Cr. Based on the lgeo of target heavy metals, the surface sediments collected from the study area can be approximately categorized as unpolluted with Zn, Pb and Cr, and moderately polluted with Cu and Cd. The degree of heavy metal pollution decreases in the order of Cu〉Cd〉Zn〉Pb〉Cr. Three groups of pollution factors are presented from FA： Zn-TOC, Cu-Cd and Cr-Pb, which respectively accounte for 27.22%, 25.20% and 21.05% of variance. By means of HCA, a total number of seven groups are distinguished from 30 sampling sites. Results indicate that Cu and Cd are the prior controlled pollutants in the estuarine sediments of the Tangxi River.

Optimization Study of the Efficient Spindle

In the field of yarn dyeing, the most generally employed method is a type of package dyeing which uses a package of cheese stacked on a spindle made of a perforated tube. Spindles up to now, have been designed without considering the characteristics of dyeing liquid, focusing only on the geometric configuration which cause many problems such as lack of level dyeing. To improve the level dyeing and find the appropriate spindle configuration for the most effective dyeing process, this study examines the spindle flow-field in detail, using a computational method. Flow characteristics inside the spindle have been investigated with varying in porosity, porous diameter and the velocity of the flow. The results show that the total pressure of the flow through the spindle is used to overcome body force. The characteristics of the flow from the porous spindle could also be observed. Based on the results from this study, an effective spindle configuration for level-dyeing has been proposed.