Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is...Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is presented. The measurement of upward, downward and net solid fluxes was carried out in a cold model circulating fluidized bed (CFB) unit. The result shows that the profile of the net solid flux is in good agreement with the previous experimental data measured with a suction probe. The comparison between the average solid flux determined with the optical measuring system and the external solid flux was made, and the maximum deviationturned out to be 22%, with the average error being about 6.9%. These confirm that the optical fiber system can be successfully used to measure the upward, downward and net solid fluxes simultaneously by correctly processing the sampling signals obtained from the optical measuring system.展开更多
The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a cold model column of 400 mm diameter. The results indicat...The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a cold model column of 400 mm diameter. The results indicate that the hole F-factor F0 and surface tension are the main factors which influence the liquid dispersion expressed by the Sauter mean diameter D32. A correlation of D32 on surface tension, viscosity, .F-factor, weir height and liquid flow rate is proposed.展开更多
Graphene substrates have recently been found to generate Raman enhancement. Systematic studies using different Raman probes have been implemented, but one of the most commonly used Raman probes, rhodamine 6G （R6G）, ...Graphene substrates have recently been found to generate Raman enhancement. Systematic studies using different Raman probes have been implemented, but one of the most commonly used Raman probes, rhodamine 6G （R6G）, has yielded controversial results for the enhancement effect on graphene. Indeed, the Raman enhancement factor of R6G induced by graphene has never been measured directly under resonant excitation because of the presence of intense fluorescence backgrounds. In this study, a polarization-difference technique is used to suppress the fluorescence background by subtracting two spectra collected using different excitation laser polarizations. As a result, enhancement factors are obtained ranging between 1.7 and 5.6 for the four Raman modes of R6G at 611, 1,183, 1,361, and 1,647 cm-~ under resonant excitation by a 514.5 nm laser. By comparing these results with the results obtained under non-resonant excitation （632.8 nm） and pre-resonant excitation （593 nm）, the enhancement can be attributed to static chemical enhancement （CHEM） and tuning of the molecular resonance. Density functional theory simulations reveal that the orbital energies and densities for R6G are modified bv ~raphene dots.展开更多
文摘Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is presented. The measurement of upward, downward and net solid fluxes was carried out in a cold model circulating fluidized bed (CFB) unit. The result shows that the profile of the net solid flux is in good agreement with the previous experimental data measured with a suction probe. The comparison between the average solid flux determined with the optical measuring system and the external solid flux was made, and the maximum deviationturned out to be 22%, with the average error being about 6.9%. These confirm that the optical fiber system can be successfully used to measure the upward, downward and net solid fluxes simultaneously by correctly processing the sampling signals obtained from the optical measuring system.
基金Supported by the Key Technologies R&D Programme (No. 95-530-01-02).
文摘The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a cold model column of 400 mm diameter. The results indicate that the hole F-factor F0 and surface tension are the main factors which influence the liquid dispersion expressed by the Sauter mean diameter D32. A correlation of D32 on surface tension, viscosity, .F-factor, weir height and liquid flow rate is proposed.
文摘Graphene substrates have recently been found to generate Raman enhancement. Systematic studies using different Raman probes have been implemented, but one of the most commonly used Raman probes, rhodamine 6G （R6G）, has yielded controversial results for the enhancement effect on graphene. Indeed, the Raman enhancement factor of R6G induced by graphene has never been measured directly under resonant excitation because of the presence of intense fluorescence backgrounds. In this study, a polarization-difference technique is used to suppress the fluorescence background by subtracting two spectra collected using different excitation laser polarizations. As a result, enhancement factors are obtained ranging between 1.7 and 5.6 for the four Raman modes of R6G at 611, 1,183, 1,361, and 1,647 cm-~ under resonant excitation by a 514.5 nm laser. By comparing these results with the results obtained under non-resonant excitation （632.8 nm） and pre-resonant excitation （593 nm）, the enhancement can be attributed to static chemical enhancement （CHEM） and tuning of the molecular resonance. Density functional theory simulations reveal that the orbital energies and densities for R6G are modified bv ~raphene dots.
