抗震结构构件箍筋下料长度的计算方法研究

根据新的《混凝土结构设计规范》和《建筑抗震设计规范》对箍筋材料和构造要求的规定,推导不同级别的抗震结构构件箍筋下料长度的理论计算公式,将理论计算公式与工程中常用的经验计算方法对比分析,判断其工程中常用的经验计算方法的准确性及适用范围。

对犯罪的经济和长效分析

犯罪人和普通人一样 ,都是为了谋取正当利益的“经济人” ,但犯罪人采取了恶的手段 ,他们认为采取这种手段可行、轻松、有效。分析各类犯罪 ,恶的手段虽然经常能暂时性地取得重大的成功 ,但从经济和长效的角度分析 ,恶的手段不是非常有效 ,恶的手段主要在使受害者遭受痛苦上有效 (根据量度差 ) ,作为获取利益的手段则是既昂贵又无效。恶人们过于关注短期因素 ,忽视长期因素 ,缘于他们内控机制的失灵。

基建施工钢筋配料优化

一、概述基建工程目前钢筋混凝土为主。美国未来学家托夫勒在'第三次浪潮'中予言,在下一个世纪的新材料中,钢筋混凝土依旧不可取代,且有发展的趋势。就以乌鲁木齐为例。近两年来,市内众多高楼大厦拔地而起。二十层以上的钢筋混凝土现浇框架结构,以年增30多栋的速度腾空出现,已达70余座。大楼消耗大量的钢材,统计数字表明,每立方米钢混结构。

基于MEMS三轴加速度传感器的摔倒检测

摔倒作为人体活动的一部分,是影响人体健康的一大因素,尤其对病人和老年人而言,摔倒检测至关重要。基于MEMS三轴加速度传感器采集的人体活动加速度信号,提出了一种基于固定阈值的信号幅度向量滑动平均法SVMSA。该方法根据人体活动时的加速度信号特征,利用预先设定的阈值对加速度信号幅度向量SVM的滑动平均SVMSA进行判决,同时使用差分信号幅度域DSMA区分快速跑步等剧烈运动,准确实现了人体的摔倒检测。主要优势在于分析并区别了人体快速跑步等剧烈运动对摔倒检测的影响。通过对8位实验者的测试,该算法实现了94.4%的精确度。实验表明该算法能够较为准确地实现人体的摔倒检测。

箍筋拉筋和吊筋的下料长度计算

针对目前建筑工程中的箍筋、拉筋和吊筋的下料长度计算普遍存在着与现行相关规范和结构图集的要求相违背的地方,基于现行相关规范和结构图集的要求,推导出了135°弯钩增加长度、钢筋做不大于90°弯折的量度差的计算公式,并具体介绍了箍筋、拉筋和吊筋的下料长度计算,对于保证工程质量和节约工程成本都具有重大的现实意义。

CDMA2000前向信道速率判决

速率判决是CDMA系统的重要技术之一。该文首先介绍了CDMA2000前向信道基于CRC校验和反转误码率的传统速率判决,并在此基础上增加了另外两个判决准则;分别描述出了这四个判决准则的实现方法,以及联合使用的判决逻辑;仿真结果表明增加的两个判决依据减小了速率判决的误帧率。

Experimental investigation of crystallization process of nanofluid by DSC

A water-TiO2nanofluid with a weight fraction of 5% and an average particle size of 75 nm is used to investigate the effect of TiO2 nanoparticles on the crystallization and melting behaviors of deionized water by using differential scanning calorimetry（DSC）at four different cooling rates,3,5,7,9 ℃/min.The DSC experimental results show that the water-TiO2 nanofluid has a lower supercooling degree and a faster crystallization rate than the deionized water.With the increase in the cooling rate,the influence of the TiO2 nanoparticles on the supercooling degree of the deionized water becomes greater,but on the crystallization rate it turns lower.During the melting process,compared with the deionized water,the water-TiO2 nanofluid has a lower melting temperature,a less latent heat and a higher melting rate.

Determination of Trace Elements in Potatoes by Flame Atomic Absorption Spectrometry

[Objective] This study aimed to analyze the contents of trace elements in potatoes from different production areas in Qinghai Province. [Method] By flame atomic absorption spectrometry （FAAS）, the contents of various trace elements in potatoes were determined. [Result] Potatoes contain abundant trace elements such as Cu, Zn, Fe, Mn, Ca, K and Mg. To be specific, the contents of Ca, K and Mg were relatively high. [Conclusion] By using FAAS, the relative standard deviation was 1.17%-2.75% and the recovery rate was 97%-99.5%, indicating accurate and reli-able results with high precision.

An improved multidirectional velocity model for micro-seismic monitoring in rock engineering

An improved multidirectional velocity model was proposed for more accurately locating micro-seismic events in rock engineering. It was assumed that the stress wave propagation velocities from a micro-seismic source to three nearest monitoring sensors in a sensor's array arrangement were the same. Since the defined objective function does not require pre-measurement of the stress wave propagation velocity in the field, errors from the velocity measurement can be avoided in comparison to three traditional velocity models. By analyzing 24 different cases, the proposed multidirectional velocity model iterated by the Simplex method is found to be the best option no matter the source is within the region of the sensor's array or not. The proposed model and the adopted iterative algorithm are verified by field data and it is concluded that it can significantly reduce the error of the estimated source location.

Image Distortion Metric Based on Total Bounded Variation

Image definition measurement plays an important role in various image processing applications.And a reliable objective image definition metrics is critical for evaluating the definition of the restored image.In this paper,a novel image distortion metric based on minimal Total Bounded Variation(TBV) is presented.It is clarified that when the restored image approximates to the original clear image,the smaller the TBV is,the better the definition of the restored image is.Furthermore,the difference between the restored image and the original clear image is the smallest when the TBV is minimum.In numerical results,the TBV of the original clear image,blur image and restored image are presented and compared,and the results demonstrate the validity of the distortion metric proposed.

No-relationship Between Impossibility of Faster-Than-Light Quantum Communication and Distinction of Ensembles with the Same Density Matrix

It has been claimed in the literature that impossibility of faster-than-light quantum communication has an origin of indistinguishability of ensembles with the same density matrix. We show that the two concepts are not related.We argue that even with an ideal single-atom-precision measurement, it is generally impossible to produce two ensembles with exactly the same density matrix; or to produce ensembles with the same density matrix, classical communication is necessary. Hence the impossibility of faster-than-light communication does not imply the indistinguishability of ensembles with the same density matrix.

Analytical Model for Calculating Trapped Charge in a－Si：H and Its Relative Error Analysis

Using a Taylor series expansion for the Fermi-Dirac occupation function,an accurate analytical model is developed for calculating the trapped-charge density in a-Si: H considering deep and tail states simultaneously without simplification.This is followed by the investigation of the relative errors of the localized trapped charge density in a-Si:H at all temperatures as a function of the quasi-Fermi level in the band gap calculated from three published analytical models and our above model. The results suggest that the relative errors of all these models increase notably as Efn is very closed to Ec(e.g.,-0.01 eV< Efn-Ec).It is also noticed that the relative errors of all above models become larger normally the greater is the value of temperature.A detailed analysis indicates that each model has its own applicability with various temperatures and various positions of the Fermi level.

GPS Rapid Static and Kinematic Positioning Based on GPS Active Network

This paper presents a data processing strategy for GPS kinematic positioning by using a GPS active network to model the GPS errors in double difference observable.Firstly,the double difference residuals are estimated between the reference stations in the active network.Then the errors at a user station are predicted as the network corrections to user measurements,based on the location of the user.Finally conventional kinematic positioning algorithms can be applied to determine the position of the user station.As an example,continuous 24_hour GPS data in March 2001 has been processed by this method.It clearly demonstrates that,after applying these corrections to a user within the network,both the success rate for ambiguity resolution and the positioning accuracy have been significantly improved.

Algorithm for Harmonic Tidal Analysis along T/P Tracks： Taking Differences of Observed Sea Surface Heights at Adjacent Points as Observations

An algorithm （differential mode） is presented for the improvement of harmonic tidal analysis along T/P tracks, in which the differences between the observed sea surface heights at adjacent points are taken as observations. Also, the observation equations are constrained with the results of the crossover analysis; the parameter estimations are performed at 0.1° latitude intervals by the least squares. Cycle 10 to 330 T/P altimeter data covering the China Sea and the Northwest Pacific Ocean （2°-50° N,105°-150° E） are adopted for a refined along-track harmonic tidal analysis, and harmonic constants of 12 constituents in 8 474 points are obtained, which indicates that the algorithm can efficiently remove non-tidal effects in the altimeter observations, and improve the precision of tide parameters. Moreover, parameters along altimetry tracks represent a smoother distribution than those obtained by traditional algorithms. The root mean squares of the fitting errors between the tidal height model and the observations reduce from 11 cm to 1.3 cm.

Processing Approach of Non-linear Adjustment Models in the Space of Non-linear Models

This paper investigates the mathematic features of non-linear models and discusses the processing way of non-linear factors which contributes to the non-linearity of a non-linear model. On the basis of the error definition,this paper puts forward a new adjustment criterion, SGPE.Last,this paper investigates the solution of a non-linear regression model in the non-linear model space and makes the comparison between the estimated values in non-linear model space and those in linear model space.

Research on CMOS Mm-Wave Circuits and Systems for Wireless Communications

This paper lenges in the design of discusses some chal- millimeter-wave （mln- wave） circuits and systems for 5th generation （5G） wireless systems in CMOS process. The properties of some passive and active devices such as inductors, capacitors, transmission lines, translbrmers and transistors in mm-wave frequency band are discussed. Self-healing technique dealing with PVT variation, res- onant mode switching technique to enhance frequency tuning range of voltage controlled oscillator （VCO） and dual mode technique for power amplifier （PA） efficiency enhancement are introduced. At last, A fully-integrated 60 GHz 5 Gb/s QPSK transceiver with the transmit/receive （T/R） switch in 65nm CMOS process is introduced. The measured error vector magnitude （EVM） of the TX is -21.9 dB while the bit error rate （BER） of the RX with a -52 dBm sine-wave input is below 8e-7 when transmitting/receiving 5 Gb/s data. The transceiver is powered by 1.0 V and 1.2 V supply （except the phase-frequency detector and charge-pump in the frequency synthesizer which are powered by 2.5 V supply） and con- sumes 135 mW in TX mode and 176 mW in RX mode.

Formal Difference Analysis and Unification on p-Norm Distribution Density Functions

The cause of the formal difference of p-norm distribution density functions is analyzed, two problems in the deduction of p-norm formulating are improved, and it is proved that two different forms of p-norm distribution density functions are equivalent. This work is useful for popularization and application of the p-norm theory to surveying and mapping.

Preliminary Results of Assessing the Mixing of Wave Transport Flux Residualin the Upper Ocean with ROMS

The effects of the mixing of wave transport flux residual(Bvl) on the upper ocean is studied through carrying out the control run(CR) and a series of sensitive runs(SR) with ROMS model.In this study,the important role of Bvl is revealed by comparing the ocean temperature,statistical analysis of errors and evaluating the mixed layer depth.It is shown that the overestimated SST is improved effectively when the wave-induced mixing is incorporated to the vertical mixing scheme.As can be seen from the vertical structure of temperature 28℃ isotherm changes from 20 min CR to 35 m in SR3,which is more close to the observation.Statistic analysis shows that the root-mean-square errors of the temperature in 10 m are reduced and the correlation between model results and observation data are increased after considering the effect of Bvl.The numerical results of the ocean temperature show improvement in summer and in tropical zones in winter,especially in the strong current regions in summer.In August the mixed layer depth(MLD) which is defined as the depth that the temperature has changed 0.5℃ from the reference depth of 10 m is further analyzed.The simulation results have a close relationship with undetermined coefficient of Bvl,sensitivity studies show that a coefficient about 0.1 is reasonable value in the model.

Improvement of machining quality of copper-plated roll mold by controlling temperature variation

Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the quality of micro prism film. The main cause of the pitch error was investigated during machining large roll mold whose machined length was 1 200 mm. The temperature of machining system was elevated during machining roll mold, and this elevation induced thermal expansion of the system. The temperature variation around the roll mold also made thermal expansion of the roll mold. The amount of thermal expansion had strong relationship to the amount of pitch error. Therefore, the roll mold was machined after warming-up of machining system and precise temperature controller around copper-plated roll mold was installed, which minimized the temperature variation. Finally, precise micro prism patterns without pitch error were machined on the large roll mold.

Correlation between Atmospheric Water Vapor and Diurnal Temperature Range over China

Diurnal temperature range （DTR） is an im- portant measure in studies of climate change and variability. The changes of DTR in different regions are affected by many different factors. In this study, the degree of correlation between the DTR and atmospheric precipitable water （PW） over China is explored using newly homogenized surface weather and sounding observations. The results show that PW changes broadly reflect the geographic patterns of DTR long-term trends over most of China during the period 1970-2012, with significant anticorrelations of trend patterns between the DTR and PW, especially over those regions with higher magnitude DTR trends. PW can largely explain about 40% or more （re 0.40） of the DTR changes, with a d（PW）/d（DTR） slope of -2% to -10% K^-1 over most of northwestern and southeastern China, despite certain seasonal dependencies. For China as whole, the significant anticorrelations between the DTR and PW anomalies range from -0.42 to -0.75, with a d（PW）/d（DTR） slope of-6% to -11% K^-1. This implies that long-term DTR changes are likely to be associated with opposite PW changes, approximately following the Clausius-Clapeyron equation. Furthermore, the relationship is more significant in the warm season than in the cold season. Thus, it is possible that PW can be considered as one potential factor when exploring long-term DTR changes over China. It should be noted that the present study has a largely statistical focus and that the underlying physical processes should therefore be examined in future work.