The carbon steels dispersed with ultrafine TiC particles were fabricated by conventional casting method. The casting process is more economical than other available routes for metal matrix composite production, and th...The carbon steels dispersed with ultrafine TiC particles were fabricated by conventional casting method. The casting process is more economical than other available routes for metal matrix composite production, and the large sized components to be fabricated in short processing time. However, it is extremely difficult to obtain uniform dispersion of ultrafine ceramic particles in liquid metals due to the poor wettability and the specific gravity difference between the ceramic particle and metal matrix. In order to solve these problems, the mechanical milling (MM) and surface-active processes were introduced. As a result, Cu coated ultrafine TiC powders made by MM process using high energy ball milling machine were mixed with Sn powders as a surfactant to get better wettability by lowering the surface tension of carbon steel melt. The microstructural investigations by OM show that ultrafine TiC particles are distributed uniformly in carbon steel matrix. The grain sizes of the cast matrix with ultrafine TiC particles are much smaller than those without ultrafine TiC particles. This is probably due to the fact that TiC particles act as nucleation sites during solidification. The wear resistance of cast carbon steel composites added with MMed TiC/Cu-Sn powders is improved due to grain size refinement.展开更多
The contribution of anthropogenic mineral aerosol dust has been of interest to understand the impact of dust aerosols on climate, and the health of workers occupational exposure. Several studies have been investigated...The contribution of anthropogenic mineral aerosol dust has been of interest to understand the impact of dust aerosols on climate, and the health of workers occupational exposure. Several studies have been investigated the physical and chemical properties mainly in particulate matter. However, the characterizations have not extended diameters below to 1.0 μm. In this study, it described chemical composition and shape measurements of individual aerosol particles with 50% cut-off diameters less than 1.1 μm emitted at ceramic-tile manufacturing. Four emission sites of process were selected, and their samples were collected using a cascade-impactor, investigated using X-ray diffraction, energy dispersive X-ray spectroscopy, and digital image processing, where the data were analysed applying a combination of principal component and cluster analysis. Particles of tectosilicate （quartz, zeolite）, phyllosilicate （illite, montmorillonite）, and inosilicate （calcium silicate） were founded in all sampling sites; also, silicates mixed with transition metals oxides used as pigments （e.g., Fe, Ti, Co, Ni, Zn and Mo）. Silicates were granulated and flat crystals with a transparent, translucent appearance; otherwise, the mixture had flake shapes and opaque appearance. Analyses of multivariate data showed that the process stages emissions were related with specific composition and shape suggesting the use three measurements related （1） the internal axis, （2） roundness and （3） roughness to isolate particles shapes, and the presence of transition metals oxides as emissions tracer of the ceramic industry.展开更多
基金supported by the Korea Atomic Energy Research Institute (KAERI) R&D Program
文摘The carbon steels dispersed with ultrafine TiC particles were fabricated by conventional casting method. The casting process is more economical than other available routes for metal matrix composite production, and the large sized components to be fabricated in short processing time. However, it is extremely difficult to obtain uniform dispersion of ultrafine ceramic particles in liquid metals due to the poor wettability and the specific gravity difference between the ceramic particle and metal matrix. In order to solve these problems, the mechanical milling (MM) and surface-active processes were introduced. As a result, Cu coated ultrafine TiC powders made by MM process using high energy ball milling machine were mixed with Sn powders as a surfactant to get better wettability by lowering the surface tension of carbon steel melt. The microstructural investigations by OM show that ultrafine TiC particles are distributed uniformly in carbon steel matrix. The grain sizes of the cast matrix with ultrafine TiC particles are much smaller than those without ultrafine TiC particles. This is probably due to the fact that TiC particles act as nucleation sites during solidification. The wear resistance of cast carbon steel composites added with MMed TiC/Cu-Sn powders is improved due to grain size refinement.
文摘The contribution of anthropogenic mineral aerosol dust has been of interest to understand the impact of dust aerosols on climate, and the health of workers occupational exposure. Several studies have been investigated the physical and chemical properties mainly in particulate matter. However, the characterizations have not extended diameters below to 1.0 μm. In this study, it described chemical composition and shape measurements of individual aerosol particles with 50% cut-off diameters less than 1.1 μm emitted at ceramic-tile manufacturing. Four emission sites of process were selected, and their samples were collected using a cascade-impactor, investigated using X-ray diffraction, energy dispersive X-ray spectroscopy, and digital image processing, where the data were analysed applying a combination of principal component and cluster analysis. Particles of tectosilicate （quartz, zeolite）, phyllosilicate （illite, montmorillonite）, and inosilicate （calcium silicate） were founded in all sampling sites; also, silicates mixed with transition metals oxides used as pigments （e.g., Fe, Ti, Co, Ni, Zn and Mo）. Silicates were granulated and flat crystals with a transparent, translucent appearance; otherwise, the mixture had flake shapes and opaque appearance. Analyses of multivariate data showed that the process stages emissions were related with specific composition and shape suggesting the use three measurements related （1） the internal axis, （2） roundness and （3） roughness to isolate particles shapes, and the presence of transition metals oxides as emissions tracer of the ceramic industry.
