太阳能电池及金属化材料的现状及发展趋势

对太阳能电池的主要研究机构、制造商、供应商的现状及金属化材料的发展进行了阐述,并指出了金属化材料的发展方向。

金属化纺织材料的研制与应用

金属化纺织材料的制造方法包括电镀、化学镀、化学涂层、真空蒸镀、真空溅射、转移等 ,制品可用于产业用。

金属化纺织材料制备技术

综述了金属化纺织材料制备技术,主要包括涂层、真空镀膜、磁控溅射法、化学镀和低温等离子体方法,介绍了各技术原理、特点,并展望了其应用前景。

金属化纤维电磁防护复合材料电磁仿真及性能研究

本文以镀镍碳纤维作为主要增强材料,利用TexGen软件进行织物多维结构建模;采用时域有限积分法(FITD)仿真电磁波在织物结构中的传播效应,对金属化纤维电磁防护复合材料的屏蔽效能进行了电磁仿真。用热压罐成型工艺制备了一类金属化纤维电磁防护复合材料,对该材料的屏蔽效能(频段:30 MHz~10 GHz)进行了实测。对仿真结果和实测结果进行分析对比,发现两者较为吻合,表明该电磁仿真技术可以有效地对电磁防护复合材料的电磁屏蔽性能进行预判。

金属化纤维电磁防护复合材料拉伸强度及失效研究

本文以镀镍碳纤维作为主要增强材料;基于经典层合板理论进行了材料建模和性能参数设定,采用Hashin准则作为材料的失效行为判据,对该材料的拉伸强度进行了数值计算。用热压罐成型工艺制备了金属化纤维电磁防护复合材料,对该材料的室温拉伸强度性能进行了实测。对数值计算结果和实测结果进行分析对比,发现两者较为吻合,实现对电磁防护复合材料的力学和失效性能进行有效预判,从而缩短产品的结构力学设计周期。

化学镀银在材料表面金属化中的应用解析

针对材料表面金属化中化学镀银工艺的应用展开探讨,从化学镀银应用背景、应用方案、应用启示三个方面着手,阐述化学镀银工艺的优势、操作要点,提高材料表面金属化处理效率,优化材料性能。

Understanding the roles of Brønsted/Lewis acid sites on manganese oxide-zeolite hybrid catalysts for low-temperature NH_(3)-SCR

Although metal oxide-zeolite hybrid materials have long been known to achieve enhanced catalytic activity and selectivity in NO_(x)removal reactions through the inter-particle diffusion of intermediate species,their subsequent reaction mechanism on acid sites is still unclear and requires investigation.In this study,the distribution of Brønsted/Lewis acid sites in the hybrid materials was precisely adjusted by introducing potassium ions,which not only selectively bind to Brønsted acid sites but also potentially affect the formation and diffusion of activated NO species.Systematic in situ diffuse reflectance infrared Fourier transform spectroscopy analyses coupled with selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)reaction demonstrate that the Lewis acid sites over MnO_(x)are more active for NO reduction but have lower selectivity to N_(2)than Brønsted acids sites.Brønsted acid sites primarily produce N_(2),whereas Lewis acid sites primarily produce N_(2)O,contributing to unfavorable N_(2)selectivity.The Brønsted acid sites present in Y zeolite,which are stronger than those on MnO_(x),accelerate the NH_(3)-SCR reaction in which the nitrite/nitrate species diffused from the MnO_(x)particles rapidly convert into the N_(2).Therefore,it is important to design the catalyst so that the activated NO species formed in MnO_(x)diffuse to and are selectively decomposed on the Brønsted acid sites of H-Y zeolite rather than that of MnO_(x)particle.For the physically mixed H-MnO_(x)+H-Y sample,the abundant Brønsted/Lewis acid sites in H-MnO_(x)give rise to significant consumption of activated NO species before their inter-particle diffusion,thereby hindering the enhancement of the synergistic effects.Furthermore,we found that the intercalated K+in K-MnO_(x)has an unexpected favorable role in the NO reduction rate,probably owing to faster diffusion of the activated NO species on K-MnO_(x)than H-MnO_(x).This study will help to design promising metal oxide-zeolite hybrid catalysts by identifying the role of the acid sites in two different constituents.

Microstructure and wear resistance of laser clad TiB-TiC/TiNi-Ti_2Ni intermetallic coating on titanium alloy

A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder blends as the precursor materials.Microstructure and worn surface morphologies of the coating were characterized by optical microscopy（OM）,scan electron microscopy（SEM）,X-ray diffraction（XRD）,energy dispersive X-ray analysis（EDS） and atomic force microscopy（AFM）.Wear resistance of the coating was evaluated under dry sliding wear test condition at room temperature.The results indicate that the laser clad coating has a unique microstructure composed of flower-like TiB-TiC eutectic ceramics uniformly distributed in the TiNi-Ti2Ni dual-phase intermetallic matrix.The coating exhibits an excellent wear resistance because of combined action of hard TiB-TiC eutectic ceramic reinforcements and ductile TiNi-Ti2Ni dual-phase intermetallic matrix.

Tortuosity factor for porous FeAl intermetallics fabricated by reactive synthesis

The tortuosity factor is the most critical parameter for the pore characteristic of porous materials. The tortuosity factor for porous FeAl intermetallics was studied based on the Darcy law and Hagen-Poiseuille equation. Porous stainless steel with the same pore structure parameter as porous FeAl was fabricated by powder metallurgy method for comparison. The results show that the tortuosity factor of porous FeAl intermetallics is smaller than that of porous stainless steel when their pore structure parameters are the same. The average tortuosity factor is 2.26 for the porous FeAl material and 2.92 for the porous stainless steel, calculated by Hagen-Poiseuille equation. The reason of the different tortuosity factors for porous FeAl and porous stainless steel was also explored through studying the pore formation mechanisms of the two types of porous materials.

Topology optimization of microstructure and selective laser meltingfabrication for metallic biomaterial scaffolds

The precise design and fabrication of biomaterial scaffolds is necessary to provide a systematic study for bone tissue engineering. Biomaterial scaffolds should have sufficient stiffness and large porosity. These two goals generally contradict since larger porosity results in lower mechanical properties. To seek the microstructure of maximum stiffness with the constraint of volume fraction by topology optimization method, algorithms and programs were built to obtain 2D and 3D optimized microstructure and then they were transferred to CAD models of STL format. Ti scaffolds with 30% volume fraction were fabricated using a selective laser melting （SLM） technology. The architecture and pore shape in the metallic biomaterial scaffolds were relatively precise reproduced and the minimum mean pore size was 231μm. The accurate fabrication of intricate microstructure has verified that the SLM process is suitable for fabrication of metallic biomaterial scaffolds.

WC-Ni_3Al-B composites prepared through Ni+Al elemental powder route

In order to develop the liquid phase sintering process of WC-Ni3Al-B composites,the preparation process of WC＋Ni3Al prealloyed powder by reaction synthesis of carbonyl Ni,analytical purity Al and coarse WC powders was investigated.DSC and XRD were adopted to study the procedure of phase transformation for the 3Ni＋Al and 70%WC＋（3Ni＋Al） mixed powders in temperature ranges of 550-1200 °C and 25-1400 °C,respectively.The results demonstrate that the formation mechanism of Ni3Al depends on the reaction temperature.Besides WC phase,there exist Ni2Al3,NiAl and Ni3Al intermetallics in the powder mixture after heat treatment at 200-660 °C,while only NiAl and Ni3Al exist at 660-1100 °C.Homogeneous WC＋Ni3Al powder mixture can be obtained in the temperature range of 1100-1200 °C.The WC-30%（Ni3Al-B） composites prepared from the mixed powders by conventional powder metallurgy technology show nearly full density and the shape of WC is round.WC-30%（Ni3Al-B） composites exhibit higher hardness of 9.7 GPa,inferior bending strength of 1800 MPa and similar fracture toughness of 18 MPa-m1/2 compared with commercial cemented carbides YGR45（WC-30%（Co-Ni-Cr））.

Theoretical prediction of effective elastic constants for new intermetallic compound porous material

Based on microstructure analysis of the new Ti-A1 intermetallic compound porous material, a micromechanics model of heterogeneous Plateau porous structure was established and calculation formulas of elastic constants （including effective elastic modulus, effective shear elastic modulus and effective Poisson ratio） were derived by the energy method for this porous material. Calculation results show that both the effective elastic modulus and effective shear elastic modulus increase with the increase of the relative density while the effective Poisson ratio decreases. Compared with the currently-existing hexagonal honeycomb model and micromechanics model of composite materials, the micromechanics model of heterogeneous Plateau porous structure in this study is more suitable for characterizing the medium-density porous material and more accurate for predicting the effective elastic constants of the medium-density porous material. Moreover, the obtained explicit expressions of the effective elastic constants in term of the relative density rather than the microstructural parameters for the uniform and regular Plateau porous structure are more convenient to engineering application.

Mechanism of anti-arterial thrombosis of Dahuangzhecong Fang screened by Ti-Al intermetallic compound porous material

The mechanism of antithrombotic of Dahuangzhechong Fang separated and purified by Ti-Al intermetallic compound porous material (TAICPM) was researched. Dahuangzhechong Fang, which was isolated and screened by TAICPM, was used to oral rats. At the end of study, their blood and thrombus were collected. The results show that TAICPM with the pore size of 1-5 μm can screen Dahuangzhechong Fang well. Dahuangzhechong Fang can increase 6-keto-PGF1α, lower content of TXD2 and platelet. Dahuangzhechong Fang has good effect to resist arterial thrombosis.

Strategies for engineering metal-organic frameworks as efficient photocatalysts

Environmental pollution and energy deficiency represent major problems for the sustainability of the modern world. Photocatalysis has recently emerged as an effective and environmentally friendly technique to address some of these sustainability issues,although the key to the success of this approach is dependent on the photocatalysts themselves. Based on their attractive physic chemical properties,including their ultrahigh surface areas,homogeneous active sites and tunable functionality,metal-organic frameworks（MOFs） have become interesting platforms for the development of solar energy conversion devices. Furthermore,MOFs have recently been used in a wide variety of applications,including heterogeneous photocatalysis for pollutant degradation,organic transformations,hydrogen production and CO2 reduction. In this review,we have highlighted recent progress towards the application of MOFs in all of these areas. We have collected numerous reported examples of the use of MOFs in these areas,as well as providing some analysis of the key factors influencing the efficiency of these systems. Moreover,we have provided a detailed discussion of new strategies that have been developed for enhancing the photocatalytic activity of MOFs. Finally,we have provided an outlook for this area in terms of the future challenges and potential prospects for MOFs in photocatalysis.

Multilayered Ti-Al intermetallic sheets fabricated by cold rolling and annealing of titanium and aluminum foils

Multilayered Ti-Al based intermetallic sheets were fabricated by sintering alternately layered titanium and aluminum foils.The microstructure and phase formation of the obtained sheets under different sintering conditions were evaluated by various techniques.The results reveal that when the sintering temperature is above the melting point of aluminum,the self-propagating high-temperature synthesis reaction occurs between Ti and Al,and forms various phases of Ti-based solid solutions including α-Ti Ti3Al,TiAl,TiAl2 and α-Ti including TiAl3,etc.When the sintering time increased,Ti-based solid solution,TiAl2 and TiAl3 disappeared gradually,and the sheet containing Ti3Al and TiAl phases in a multilayered structure formed finally.A lot of voids were also observed in the sintered structures,which were caused by the melting Al,Kirkendall effect and the difference of molar volumes between reactants and products.The voids were eliminated and a dense sample was obtained by the following hot press.

大型喇叭状碳纤维天线成型工艺研究

简述了碳纤维复合材料的优异性能,并介绍了通过材料选择、模具制作和调整、碳纤维铺层的合理设计等一些工艺手段,腐蚀芯模法脱模,研制出了精度较高的薄板式碳纤维/环氧喇叭状复合材料天线。

Fabrication of amino-functionalized Fe_3O_4@Cu_3(BTC)_2 for heterogeneous Knoevenagel condensation

Metal organic frameworks（MOFs） are an important platform for heterogeneous catalysts.Although MOFs with a smaller particle size exhibit better catalytic performance because of less diffusion limitations,their separation and recycling after catalytic reactions are difficult.The integration of MOFs with magnetic nanoparticles could facilitate their recovery and separation.Especially,the shell thickness of the core-shell structured composites is controllable.In this study,amino-functionalized Fe3O4@Cu3（BTC）2 was fabricated by a stepwise assembly method and its catalytic performance in Knoevenagel condensation was investigated.The results demonstrated that the magnetic hybrid material exhibited a core-shell structure,with a shell thickness of about 2 00 nm.Furthermore,it not only exhibited high catalytic activity,but remarkably,it could also be easily recovered magnetically and recycled without obvious loss of catalytic efficiency after three cycles.

Carbon dioxide-expanded ethanol-assisted synthesis of carbon-based metal composites and their catalytic and electrochemical performance in lithium-ion batteries

Highly dispersed metals,metal oxides and their composites on substrates have received considerable interest in catalysis and lithium-ion batteries,because of their superior properties compared with their single-component counterparts.In this review,we introduce the properties of supercritical carbon dioxide（scCO2） expanded ethanol,such as low viscosity,near-zero surface tension and high diffusivity.We discuss the deposition procedure and formation mechanism of carbon-based composites in scCO2-expanded ethanol.This method has been used to fabricate several carbon-based composites,such as metal and metal oxide composites deposited on zero-dimensional colloidal carbon,one-dimensional carbon nanotubes,two-dimensional graphene,and three-dimensional hierarchical porous carbon.These materials and their performance as anodic materials for lithium-ion batteries will also be reviewed.

Influence of the metal sites of M-N-C(M=Co, Fe, Mn) catalysts derived from metalloporphyrins in ethylbenzene oxidation

Transition metal catalysts M-N-C（M = Co,Fe,Mn） were synthesized by a template-free method by heating meso-tetraphenyl porphyrins（i.e.CoTPP,FeTPPCl,MnTPPCl） precursors.The catalysts were characterized by N2 adsorption-desorption,thermogravimetry,high-resolution transmission electron microscopy,and Raman and X-ray photoelectron spectroscopy.The selective oxidation of ethylbenzene with molecular oxygen under a solvent-free condition was carried out to explore the catalytic performance of the M-N-Cs,which exhibited different catalytic performance.That was ascribed to the difference in M（Co,Fe,Mn） and different graphitization degree forming during the heating process,in which M（Co,Fe,Mn） might have different catalytic activity on the formation of the M-N-C catalyst.All the M-N-C composites had remarkable recyclability in the selective oxidation of ethylbenzene.

Fabrication of porous Fe Al-based intermetallics via thermal explosion

Porous FeAl-based intermetallics were fabricated by thermal explosion（TE） from Fe and Al powders. The effects of sintering temperature on phase constitution, pore structure and oxidation resistance of porous Fe-Al intermetallics were systematically investigated. Porous Fe-Al materials with high open porosity（65%） are synthesized via a low-energy consumption method of TE at a temperature of 636 ℃ and FeAl intermetallic is evolved as dominant phase in sintered materials at 1000 ℃. The porous materials are composed of interconnected skeleton, large pores among skeleton and small pores in the interior of skeleton. The interstitial pores in green powder compacts are the important source of large pores of porous Fe-Al intermetallics, and the in-situ pores from the melting and flowing of aluminum powders are also significant to the formation of large pores. Small pores are from the precipitation of Fe-Al intermetallics particles. In addition, the porous specimens exhibit high resistance to oxidation at 650 ℃ in air.