K~＋－SrO－La_2O_3／ZnO催化剂上甲烷氧化偶联反应Ⅱ．催化剂碱性和氧物种的表征

Ｋ＋－ＳｒＯ－Ｌａ２Ｏ３／ＺｎＯ（ＫＳＬＺ）催化体系具有很好的催化活性．在１０７３Ｋ反应温度下，其Ｃ２产率为１８．２％，且Ｃ２选择性为６８．３％．催化剂抗潮能力明显增加，在室温下经长期放置后，催化剂活性稳定．用ＸＲＤ，ＣＯ２－ＴＰＤ和ＸＰＳ表征了ＫＳＬＺ催化剂的体相组成及表面碱性、表面组成和表面活性氧物种．在此基础上讨论了Ｌａ２Ｏ３，ＳｒＯ和Ｋ＋各组分对甲烷氧化偶联反应的作用，提出了表面碳酸盐分解生成活性氧物种的可能性．

Al_2O_3-SiC-C出铁沟浇注料抗氧化性能提高的新进展

介绍了消耗性耐材Al2O3-SiC-C质超低水泥结合出铁沟浇注料发展趋势。着重介绍了通过对不同碳素材料的抗氧化性分析以及亲水性探索,在以沥青为通常碳素来源的出铁沟浇注料中加入多种碳素,使碳素源的抗氧化性提高;通过控制基质中的二氧化硅以及碳化硅等的比例,使得加入非金属防氧化剂碳化硼后避免生成过多的低融相,并提高抗氧化性。抗氧化性的提高,提高了出铁沟浇注料的使用寿命,减少了沟料用后残衬的解体量,降低了单耗。

Effect of Elastic Strains on Adsorption Energies of C,H and O on Transition Metal Oxides

Platinum(Pt)-based noble metal catalysts(PGMs)are the most widely used commercial catalysts,but they have the problems of high cost,low reserves,and susceptibility to small-molecule toxicity.Transition metal oxides(TMOs)are regarded as potential substitutes for PGMs because of their stability in oxidizing environments and excellent catalytic performance.In this study,comprehensive investigation into the influence of elastic strains on the adsorption energies of carbon(C),hydrogen(H)and oxygen(O)on TMOs was conducted.Based on density functional theory(DFT)calculations,these effects in both tetragonal structures(PtO_(2),PdO_(2))and hexagonal structures(ZnO,CdO),along with their respective transition metals were systematically explored.It was identified that the optimal adsorption sites on metal oxides pinpointed the top of oxygen or the top of metal atom,while face-centered cubic(FCC)and hexagonal close-packed(HCP)holes were preferred for the transition metals.Furthermore,under the influence of elastic strains,the results demonstrated significant disparities in the adsorption energies of H and O between oxides and transition metals.Despite these differences,the effect of elastic strains on the adsorption energies of C,H and O on TMOs mirrored those on transition metals:adsorption energies increased under compressive strains,indicating weaker adsorption,and decreased under tension strains,indicating stronger adsorption.This behavior was rationalized based on the d-band model for adsorption atop a metallic atom or the p-band model for adsorption atop an oxygen atom.Consequently,elastic strains present a promising avenue for tailoring the catalytic properties of TMOs.

非平衡晶化控制水滑石晶粒尺寸

本文采用非平衡晶化法通过在晶化后期补加原料合成了一系列不同晶粒尺寸的水滑石LDH样品研究表明非平衡晶化法可在一定范围内调控LDH的粒径所合成的LDH样品组成稳定晶体结构完整。

Progress in research on catalysts for catalytic oxidation of formaldehyde

Formaldehyde（HCHO）is carcinogenic and teratogenic,and is therefore a serious danger to human health.It also adversely affects air quality.Catalytic oxidation is an efficient technique for removing HCHO.The development of highly efficient and stable catalysts that can completely convert HCHO at low temperatures,even room temperature,is important.Supported Pt and Pd catalysts can completely convert HCHO at room temperature,but their industrial applications are limited because they are expensive.The catalytic activities in HCHO oxidation of transition-metal oxide catalysts such as manganese and cobalt oxides with unusual morphologies are better than those of traditional MnO2,Co3O4,or other metal oxides.This is attributed to their specific structures,high specific surface areas,and other factors such as active phase,reducibility,and amount of surface active oxygens.Such catalysts with various morphologies have great potential and can also be used as catalyst supports.The loading of relatively cheap Ag or Au on transition-metal oxides with special morphologies potentially improves the catalytic activity in HCHO removal at room temperature.The preparation and development of new nanocatalysts with various morphologies and structures is important for HCHO removal.In this paper,research progress on precious-metal and transition-metal oxide catalyst systems for HCHO oxidation is reviewed; topics such as oxidation properties,structure–activity relationships,and factors influencing the catalytic activity and reaction mechanism are discussed.Future prospects and directions for the development of such catalysts are also covered.

NO reduction by CO over TiO_2-γ-Al_2O_3 supported In/Ag catalyst under lean burn conditions

TiO2/γ-Al2O3 supported In/Ag catalysts were prepared by impregnation method,and investigated for NO reduction with CO as the reducing agent under lean burn conditions.The microscopic structure and surface properties of the catalysts were studied by N2 adsorption-desorption,X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectroscopy,ultraviolet-visible spectroscopy,H2 temperature-programmed reduction and Fourier transform infrared spectroscopy.TiO2/γ-Al2O3 supported In/Ag is a good catalyst for the reduction of NO to N2.It displayed high dispersion,large amounts of surface active components and high NO adsorption capacity,which gave good catalytic performance and stability for the reduction of NO with CO under lean burn conditions.The silver species stabilized and improved the dispersion of the indium species.The introduction of TiO2 into the γ-Al2O3 support promoted NO adsorption and improved the dispersion of the indium species and silver species.

环境因子对发酵液中谷胱甘肽稳定性的影响

利用酵母生产还原型谷胱甘肽(GSH)时,GSH的稳定性直接影响细胞酶催化合成GSH的效率。在絮凝酵母摇瓶发酵培养24 h时,模拟胞外存在GSH的环境,向发酵液中添加200 mg/L的GSH,考察胞内外GSH稳定性情况;同时检测环境因子氧、温度、pH,以及金属离子(Zn^(2+)、Mn^(2+)、Cd^(2+))对胞内外GSH稳定性的影响。结果表明:正常环境条件下培养6 h,发酵液中GSH的回收率达到70%,导致GSH不稳定的主要因素是氧化,细胞内GSH浓度相对变化不明显;在温度≤25℃,pH3.5~4.5和厌氧发酵条件下,发酵液中GSH稳定性显著提高(P<0.05);Zn^(2+)、Mn^(2+)和Cd^(2+)对GSH稳定性影响不明显(P>0.05)。

Co_3O_4 nanoparticles assembled on polypyrrole/graphene oxide for electrochemical reduction of oxygen in alkaline media

The development of highly efficient catalysts for cathodes remains an important objective of fuel cell research. Here, we report Co3O4 nanoparticles assembled on a polypyrrole/graphene oxide electrocatalyst （Co3O4/Ppy/GO） as an efficient catalyst for the oxygen reduction reaction （ORR） in alkaline media. The catalyst was prepared via the hydrothermal reaction of Co2＋ ions with Ppy-modified GO. The GO, Ppy/GO, and Co3O4/Ppy/GO were characterized using scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The incorporation of Ppy into GO nanosheets resulted in the formation of a nitrogen-modified GO po-rous structure, which acted as an efficient electron-transport network for the ORR. With further anchoring of Co3O4 on Ppy/GO, the as-prepared Co3O4/Ppy/GO exhibited excellent ORR activity and followed a four-electron route mechanism for the ORR in alkaline solution. An onset potential of -0.10 V vs. a saturated calomel electrode and a diffusion limiting current density of 2.30 mA/cm^2 were achieved for the Co3O4/Ppy/GO catalyst heated at 800 ℃; these values are comparable to those for noble-metal-based Pt/C catalysts. Our work demonstrates that Co3O4/Ppy/GO is highly active for the ORR. Notably, the Ppy coupling effects between Co3O4 and GO provide a new route for the preparation of efficient non-precious electrocatalysts with hierarchical porous structures for fuel cell applications.

Catalytic removal of volatile organic compounds using ordered porous transition metal oxide and supported noble metal catalysts

Most of volatile organic compounds （VOCs） are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.

Flower-like 3D CuO microsphere acting as photocatalytic water oxidation catalyst

Flower-like 3D CuO microspheres were synthesized and used to photo-catalyze water oxidation under visible light.The structure of the CuO microspheres was characterized by scanning electron microscopy,transmission electron microscopy,infrared,powder X-ray diffraction,electron dispersive spectroscopy,Raman and X-ray photoelectron spectroscopy（XPS）.This is the first time that a copper oxide was demonstrated as a photocatalytic water oxidation catalyst under near neutral conditions.The catalytic activity of CuO microspheres in borate buffer shows the best performance with O2 yield of 11.5%.No change in the surface properties of CuO before and after the photocatalytic reaction was seen by XPS,which showed good catalyst stability.A photocatalytic water oxidation reaction mechanism catalyzed by the CuO microspheres was proposed.

Preparation of Nitrogen-Doped Carbon Catalyst to Oxygen Reduction Reaction and Influence of Protective Gas Flowing on Its Activity

A non-precious metal catalyst MnHMTA/C to oxygen reduction reaction was prepared by py- rolyzing a precursor from manganese chloride, hexamethylenetetramine and acetylene black in nitrogen gas atmosphere. The effect of heat treatment temperature and flowing of nitrogen gas were investigated. A catalyst with the highest activity can be obtained at 700 ℃. Mn（Ⅱ） ion was changed to MnO in heat treatment, which improved the catalytic activity of the catalyst. Hexamethylenetetramine takes part in the formation of active site of the catalyst as its decomposed gases. The flowing of protective gas takes the decomposed gases out of the tube furnace and brings negative effect on the catalytic activity of the MnHMTA/C catalyst.

Promotional effect of spherical alumina loading with manganese-based bimetallic oxides on nitric-oxide deep oxidation by ozone

Nitric oxide （NO） deep oxidation to dinitrogen pentoxide （N2O5） by ozone together with wet scrub-bing has become a promising technology for nitrogen-oxide （NOx） removal in industrial boilers. Catalysts were introduced to enhance the N2O5 formation rate with less ozone injection and leakage. A series of monometallic catalysts （manganese, cobalt, cerium, iron, copper, and chromium） as pre-pared by the sol-gel method were tested. The manganese oxides achieved an almost 80% conver-sion efficiency at an ozone （O3）/NO molar ratio of 2.0 in 0.12 s. The crystalline structure and porous parameters were determined. The thermodynamic reaction threshold of NO conversion to N2O5 is oxidation with an O3/NO molar ratio of 1.5. Spherical alumina was selected as the support to achieve the threshold, which was believed to improve the catalytic activity by increasing the surface area and the gas-solid contact time. Based on the manganese oxides, cerium, iron, chromium, cop-per, and cobalt were introduced as promoters. Cerium and iron improved the deep-oxidation effi-ciency compared with manganese/spherical alumina, with less than 50 mg/m3 of outlet NO ＋ nitro-gen oxide, and less than 25 mg/m3 of residual ozone at an O3/NO molar ratio of 1.5. The other three metal oxides inhibited catalytic activity. X-ray diffraction, nitrogen adsorption, hydrogen tempera-ture-programmed reduction, and X-ray photoelectron spectroscopy results indicate that the cata-lytic activity is affected by the synergistic action of NOx oxidation and ozone decomposition.

具有皮革风格的纤维衣物加工技术

最近,国外研究出一种可以使纤维衣物具皮革风格的加工技术。采用这种技术不仅可以对衣物的原材料进行处理,还可对缝制成品进行加工处理,而且加工工序简单、价格低廉。 具有皮革风格的纤维衣物加工技术主要由以下几道工序组成: 1 金属氧化固定工序 金属氧化固定工序是用金属氧化剂使金属氧化固定在纤维衣物上。例如将混纺细斜纹布制作的衣物浸到含金属氧化剂的溶液中,到一定的时间后取出置于空气中,由于氧化作用,衣物上便带有一定颜色的金属氧化层。 金属氧化剂可以选用高锰酸钾、硫酸亚铁、硫酸铁、氯化亚铁等。用高锰酸钾氧化剂时,纤维衣物上留下的是锰的氧化物,用硫酸亚铁、硫酸铁、氯化亚铁氧化剂时,纤维衣物上留下的是铁的氧化物。

Application of ionic liquids in hydrometallurgy of nonferrous metals

Ionic liquids as green solvents have shown important application in the extraction and separation of nonferrous metals.The new application perspective,the important fundamental and the applied studies of the extraction and separation of nonferrous metals in ionic liquids,including the dissolution and corrosion of metal and metal oxide,hydrometallurgy of chalcopyrite and metallic oxidized ore,and extraction and separation of metal ions,are introduced.

Importance, features and uses of metal oxide catalysts in heterogeneous catalysis

This short review paper aims at assembling the present state of the art of the multiuses of metal oxides in heterogeneous catalysis, concerning liquid and gaseous phases of the reactant mixtures on solid catalysts. It includes the description of the main types of metal oxide catalysts, of their various preparation procedures and of the main reactions catalysed by them (acid-base type, selective and total oxidations, bi-functional catalysis, photocatalysis, biomass treatments, environmental catalysis and some of the numerous industrial applications). Challenges and prospectives are also discussed.

A high performance non-noble metal electrocatalyst for the oxygen reduction reaction derived from a metal organic framework

The development of a non-precious metal electrocatalyst （NPME） with a performance superior to commercial Pt/C for the oxygen reduction reaction （ORR） is important for the commercialization of fuel cells. We report the synthesis of a NPME by heat-treating Co-based metal organic frameworks （ZIF-67） with a small average size of 44 nm. The electrocatalyst pyrolyzed at 600 ~C showed the best performance and the performance was enhanced when it was supported on BP 2000. The resulting electrocatalyst was composed of 10 nm Co nanoparticles coated by 3-12 layers of N doped graphite layers which as a whole was embedded in a carbon matrix. The ORR performance of the electrocatalyst was tested by rotating disk electrode tests in O2-saturated 0.1 mol/L KOH under ambient conditions. The electrocatalyst （1.0 mg/cm~] showed an onset potential of 1.017 V （[vs. RHE] and a half-wave potential of 0.857 V （vs. RHE], which showed it was as good as the commer- cial Pt/C （20 BgPt/cm2）. Furthermore, the electrocatalyst possessed much better stability and re- sistance to methanol crossover than Pt/C.

Promotional effects of Sb on Pd-based catalysts for the direct synthesis of hydrogen peroxide at ambient pressure

TiO2‐supported Pd‐Sb bimetallic catalysts were prepared and evaluated for the direct synthesis of H2O2 at ambient pressure.The addition of Sb to Pd significantly enhanced catalytic performance,and a Pd50Sb catalyst showed the greatest selectivity of up to 73%.Sb promoted the dispersion of Pd on TiO2,as evidenced by transmission electron microscopy and X‐ray diffraction.X‐ray photoelectron spectroscopy indicated that the oxidation of Pd was suppressed by Sb.In addition,Sb2O3 layers were formed and partially wrapped the surfaces of Pd catalysts,thus suppressing the activation of H2 and subsequent hydrogenation of H2O2.In situ diffuse reflection infrared Fourier transform spectroscopy for CO adsorption suggested that Sb homogenously located on the surface of Pd‐Sb catalysts and isolated contiguous Pd sites,resulting in the rise of the ratio of Pd monomer sites that are favorable for H2O2 formation.As a result,the Sb modified Pd surfaces significantly enhanced the non‐dissociative activation of O2 and H2O2 selectivity.

Simple synthesis of nitrogen‐doped carbon spheres as a highly efficient metal‐free electrocatalyst for the oxygen reduction reaction

In the present work, nitrogen‐doped carbon spheres were synthesized through a simple hydro‐thermal treatment using glucose and melamine as inexpensive carbon and nitrogen sources, re‐spectively. The ratio of melamine to glucose and annealing temperature were optimized. The final optimal sample exhibited a catalytic activity for the oxygen reduction reaction（ORR） that was supe‐rior than that of commercial 20%Pt/C in 0.1 mol/L KOH. It revealed an onset potential of –22.6 mV and a half‐wave potential of –133.6 mV （vs. Ag/AgCl）, which are 7.2 and 5.9 mV more positive than those of the 20%Pt/C catalyst, respectively, as well as a limiting current density of 4.6 mA/cm^2, which is 0.2 mA/cm^2 higher than that of the 20%Pt/C catalyst. The catalyst also exhibited higher stability and superior durability against methanol than 20%Pt/C. Moreover, ORRs on this catalyst proceed through a more effective 4 e^– path. The above mentioned superiority of the as‐prepared catalyst makes it promising for fuel cells.

Mechanochemical redox-based synthesis of highly porous CoxMn1-xOy catalysts for total oxidation

A mechanochemical redox reaction between KMnO4 and CoCl2 was developed to obtain a CoxMn1-xOy catalyst with a specific surface area of 479 m^2 g^-1,which was higher than that obtained using a co-precipitation(CP)method(34 m2 g^-1),sol-gel(SG)method(72 m^2 g^-1),or solution redox process(131 m^2 g^-1).During catalytic combustion,this CoxMn1-xOy catalyst exhibited better activity(T100 for propylene=~200℃)than the control catalysts obtained using the SG(325℃)or CP(450℃)methods.The mechanical action,mainly in the form of kinetic energy and frictional heating,may generate a high degree of interstitial porosity,while the redox reaction could contribute to good dispersion of cobalt and manganese species.Moreover,the as-prepared CoxMn1-xOy catalyst worked well in the presence of water vapor(H2O 4.2%,>60 h)or SO2(100 ppm)and at high temperature(400℃,>60 h).The structure MnO2·(CoOOH)2.93 was suggested for the current CoxMn1-xOy catalyst.This catalyst could be extended to the total oxidation of other typical hydrocarbons(T90=150°C for ethanol,T90=225°C for acetone,T90=250℃for toluene,T90=120℃for CO,and T90=540℃for CH4).Scale-up of the synthesis of CoxMn1-xOy catalyst(1 kg)can be achieved via ball milling,which may provide a potential strategy for real world catalysis.