高中化学中金属吸氧腐蚀的实验方法创新研究

化学实验室高中化学的不可或缺的一部分,通过以化学实验为主要内容的多种科学的实验创新、探究活动,我们学生得到进步、吸收知识。在高中化学新课程的学习过程当中,如何进一步的展开对化学实验教学的探究与方法的创新。本文针对高中化学中金属吸氧腐蚀的实验方法创新浅谈了一些做法和体会。

工业锅炉给水解吸除氧

本文介绍解吸除氧原理，设备装置及其特点，着重强调工业锅炉给水除氧的必要性。

Application of ionic liquids in hydrometallurgy of nonferrous metals

Ionic liquids as green solvents have shown important application in the extraction and separation of nonferrous metals.The new application perspective,the important fundamental and the applied studies of the extraction and separation of nonferrous metals in ionic liquids,including the dissolution and corrosion of metal and metal oxide,hydrometallurgy of chalcopyrite and metallic oxidized ore,and extraction and separation of metal ions,are introduced.

Comments on process of duplex coatings on aluminum alloys

Despite the great achievements made in improvement of wear resistance properties of aluminum alloys, their applications in heavy surface load-bearing are limited. Single coating is insufficient to produce the desired combination of surface properties. These problems can be solved through the duplex coatings. The aim of the present study is to overview the research advances on processes of duplex coatings on (aluminum) alloys combined with micro plasma oxidation process and with other modern processes such as physical vapour deposition and plasma assisted chemical vapour deposition and also to evaluate the performance of micro plasma oxidation coatings in improving the load-bearing, friction and wear resistance properties of aluminum alloys in comparison with other coatings. Wherein, a more detailed presentation of the processes and their performances and disadvantages are given as well.

Study on metal corrosion caused by chlorine dioxide of various purities

Weight lost method was used to comparatively study the corrosion behavior of four different metals under the dosage of chlorine dioxide, chlorine and their mixture respectively. The experimental results indicated that chlorine causes the most serious corrosion of carbon steel, and the higher the concentration of chlorine, the more serious the corrosion. On the contrary, metals corrosion is the least serious in the case of chlorine dioxide. The results further revealed that chlorine dioxide is the most effective water treatment reagent, making it the best choice to use extensively in circulated cooling water disinfection and corrosion control.

DFT Study of Metal Atoms Adsorbed at Low-coordinated Sites of MgO (001) Surface

The adsorption of metal atoms, Ni, Pd, Pt, Cu, Ag and Au, at low-coordinated edge and corner oxygen sites of MgO (001) surface has been studied theoretically by using density functional method with cluster models embedded in a large array of point charges. For comparison, the interaction of metal atoms with perfect regular oxygen site of MgO (001) surface was also calculated. As regards these metal atoms adsorbed at perfect oxygen sites of MgO (001) surface, Cu, Ag and Au are very weakly bonded to the surface of MgO; Ni, Pd and Pt, on the other hand, exhibit strong interactions with perfect oxygen sites of MgO (001) surface; the large adsorption energy shows that there exist strong bonds formed between these metal atoms with surface oxygen sites. For the metal atoms adsorbed at edge and corner sites, the adsorption energy is much increased, consistent with our previous study of CO and Cl2 adsorption on MgO (001) surface. This illustrates that the low-coordinated sites, especially corner site, are more advantageous positions for those metal atoms adsorbed on MgO (001) surface. The Mulliken population analysis indicates that the electron transferred from MgO to the metal atoms were increased with the decrease of the coordination numbers, which may be one of the reasons for changing catalytic efficiency and selectivity of the metal particles supported by MgO.

Corrosion leaking of preheater weldment in alumina factories

Stress corrosion cracking (SCC) and anticorrosion measures of TU42C weld-joint were studied by constant load experiments and pickling experiments. The results show that in 40%(mass fraction) NaOH solution at 110℃, caustic SCC occurs in TU42C weld-joints at the applied potential of-1020mV(vs SCE) for 3d while at the potential of-950mV(vs SCE) for 10d. All the cracks are intergranular. In the 10% sulfuric acid, the cracks have the most negative self-corrosion potential-432.5mV(vs SCE) and are active to be further corroded by the acid. Because of the same corrosion behaviour as the lab weldment, preheater’s cracking in alumina factories is attributed to the combining actions of previous caustic SCC in Bayer solutions and continuous acid corrosion by pickling with the addition of RD. The following measures are effective to prevent the corrosion failure of preheater, such as postweld heat treatment at 620℃ to relax the residual weld stress, addition of CC3 and L826 as the corrosion inhibitors to improve the pickling and cleaning by the high pressure water instead of by pickling.

Corrosion behavior of metals or alloys with a solid NaCl deposit in wet oxygen at medium temperature

The corrosion of metals or alloys under solid NaCl deposit in wet oxygen （water vapor and oxygen） at medium temperature 4013-700℃ causes serious damage and has received considerable attention in recent years. Series of mechanistic studies have revealed synergistic interactions between solid NaCl and water vapor, which accelerates the corrosion process. In addition, the overall corrosion process comprises both chemical reactions （oxidation） and electrochemical reactions and their mutual inter- actions depend on the system of interest. Interestingly, the wet oxygen environment was found to modify the reactions of the element Cr, which plays a useful role in corrosion protection in this special environment.