The effect of rutile（TiO_2） content on the wear and microhardness properties of aluminium（Al）-based hybrid composites was explored. The proposed content of TiO_2（0, 4%, 8%, 12%, mass fraction） was blended to Al-...The effect of rutile（TiO_2） content on the wear and microhardness properties of aluminium（Al）-based hybrid composites was explored. The proposed content of TiO_2（0, 4%, 8%, 12%, mass fraction） was blended to Al-15% SiC composites through powder metallurgy（P/M） process. Wear test was conducted using pin-on-disc apparatus under dry sliding conditions. Fabricated preforms were characterized using X-ray diffractometer（XRD）, scanning electron microscope（SEM） and energy-dispersive X-ray spectrometer（EDS）. Optical micrographs of the composite preforms display uniform distribution of TiO_2 throughout the matrix. Quantitative results indicate that wear resistance and microhardness increase with the increase of TiO_2 content. SEM images unveil that high wear resistance is attributed to high dislocation density of deformed planes and high hardness of TiO_2. SEM images of wear debris display gradual reduction in mean size of debris when TiO_2 content increases. EDS spectra confirm the presence of oxide layer which obviously reduces the effective area of contact between the sliding surfaces thereby lowers the wear loss of composites. The observation concludes that delamination and adhesive wear are the predominant mechanisms.展开更多
Increasing production and disposal of coal fly ash （CFA） is a matter of serious environment concern. However, CFA contains various beneficial metals and mineral matters whose demand is increasing in the industrializ...Increasing production and disposal of coal fly ash （CFA） is a matter of serious environment concern. However, CFA contains various beneficial metals and mineral matters whose demand is increasing in the industrialized world, while natural supplies are diminishing. Therefore, recovery of these potential resources from CFA can be an alternative way to save mineral resources, as well as to reduce the environmental burden of CFA disposal. There are numerous methods developed for the recovery of beneficial products from CFA. Based on the US patents and journal literatures, the present review describes the recovery status and technologies of major elements such as Al, Si, Fe and Ti, and trace elements such as V, Ga, Ge, Se, Li, Mo, U, Au, Ag, Pt groups and rare earth elements （REEs） and other beneficial products such as magnetic materials, cenospheres, and unburned carbon from CFA. It also highlights the recovery efficiency and drawbacks for their extraction, and suggests future research to develop satisfactory results in terms of selective recovery and purification.展开更多
The results to develop a complex technology of co-extraction of germanium and gallium from the ash-and-slag wastes of coal combustion in Ukraine were presented. Based on the study of phase changes occurring in initial...The results to develop a complex technology of co-extraction of germanium and gallium from the ash-and-slag wastes of coal combustion in Ukraine were presented. Based on the study of phase changes occurring in initial raw materials as a result of its processing, it was proposed to carry out a preliminary enrichment of the raw materials in order to produce secondary sublimates. Their further processing involves a combination of leaching soluble material with distillation of germanium in the form of tetrachloride. The resulting acidic solutions are trended to the gallium extraction. Optimum conditions of carrying out of processes are recommended.The chemical and phase composition of the resulting dump products and solutions have been defined. On the basis of it ways of their processing for the purpose of reception of alumina and building materials are recommended.展开更多
文摘The effect of rutile（TiO_2） content on the wear and microhardness properties of aluminium（Al）-based hybrid composites was explored. The proposed content of TiO_2（0, 4%, 8%, 12%, mass fraction） was blended to Al-15% SiC composites through powder metallurgy（P/M） process. Wear test was conducted using pin-on-disc apparatus under dry sliding conditions. Fabricated preforms were characterized using X-ray diffractometer（XRD）, scanning electron microscope（SEM） and energy-dispersive X-ray spectrometer（EDS）. Optical micrographs of the composite preforms display uniform distribution of TiO_2 throughout the matrix. Quantitative results indicate that wear resistance and microhardness increase with the increase of TiO_2 content. SEM images unveil that high wear resistance is attributed to high dislocation density of deformed planes and high hardness of TiO_2. SEM images of wear debris display gradual reduction in mean size of debris when TiO_2 content increases. EDS spectra confirm the presence of oxide layer which obviously reduces the effective area of contact between the sliding surfaces thereby lowers the wear loss of composites. The observation concludes that delamination and adhesive wear are the predominant mechanisms.
文摘Increasing production and disposal of coal fly ash （CFA） is a matter of serious environment concern. However, CFA contains various beneficial metals and mineral matters whose demand is increasing in the industrialized world, while natural supplies are diminishing. Therefore, recovery of these potential resources from CFA can be an alternative way to save mineral resources, as well as to reduce the environmental burden of CFA disposal. There are numerous methods developed for the recovery of beneficial products from CFA. Based on the US patents and journal literatures, the present review describes the recovery status and technologies of major elements such as Al, Si, Fe and Ti, and trace elements such as V, Ga, Ge, Se, Li, Mo, U, Au, Ag, Pt groups and rare earth elements （REEs） and other beneficial products such as magnetic materials, cenospheres, and unburned carbon from CFA. It also highlights the recovery efficiency and drawbacks for their extraction, and suggests future research to develop satisfactory results in terms of selective recovery and purification.
文摘The results to develop a complex technology of co-extraction of germanium and gallium from the ash-and-slag wastes of coal combustion in Ukraine were presented. Based on the study of phase changes occurring in initial raw materials as a result of its processing, it was proposed to carry out a preliminary enrichment of the raw materials in order to produce secondary sublimates. Their further processing involves a combination of leaching soluble material with distillation of germanium in the form of tetrachloride. The resulting acidic solutions are trended to the gallium extraction. Optimum conditions of carrying out of processes are recommended.The chemical and phase composition of the resulting dump products and solutions have been defined. On the basis of it ways of their processing for the purpose of reception of alumina and building materials are recommended.
