Non-contact measurements of machining temperatures were performed with optical pyrometer when drilling particle（B4C） reinforced metal matrix composites（MMCs） with different drills. The effect of particle content, ...Non-contact measurements of machining temperatures were performed with optical pyrometer when drilling particle（B4C） reinforced metal matrix composites（MMCs） with different drills. The effect of particle content, cutting speed, feed rate and tool material on the maximum drilling temperature was investigated. The drilling parameters were optimized based on multiple performance characteristics in terms of the maximum cutting temperature and tool wear. According to the results, the most influential control factors on the cutting temperatures are found to be particle fraction, feed rate and interaction between the cutting speed and particle content, respectively. The influences of the cutting speed and drill material on the drilling temperature are found to be relatively lower for the used range of parameters. Minimum cutting temperatures are obtained with lower particle fraction and cutting speed, with relatively higher feed rates and carbide tools. The results reveal that optimal combination of the drilling parameters can be used to obtain both minimum cutting temperature and tool wear.展开更多
Underground water （Borehole） has been the main alternative source of drinking water for most communities in my country. Previous studies have revealed high levels of contamination. The origin of which can be attribu...Underground water （Borehole） has been the main alternative source of drinking water for most communities in my country. Previous studies have revealed high levels of contamination. The origin of which can be attributed to geochemical processes, combustion of fossil fuels, mining and anthropogenic activities. Most borehole water and well water in local communities of Nigeria are not safe for drinking due to heavy industrial and environmental pollution. This study was undertaken to assess the quality in some selected boreholes in the Port Harcourt metropolis for a period of two years. Borehole water samples were randomly collected from thirteen boreholes in a local community in plastic bottles （100 mL） in the months of September for the years of study （2010 ＆ 2011）. Four out of the seven heavy metals analyzed were found to be present in the first year of study. These were Fe, Cu, Mn and Zn. In the second year of study, Pb, Cr, Fe and Co were not detected in all of the samples except Cu and Fe which were present in only two samples. Mn and Zn were found to be present in all of the samples for both years of study.展开更多
A single freedom degree model of drilling bit-rock was established according to the vibration mechanism and its dynamic characteristics. Moreover, a novel identification method of rock and soil parameters for vibratio...A single freedom degree model of drilling bit-rock was established according to the vibration mechanism and its dynamic characteristics. Moreover, a novel identification method of rock and soil parameters for vibration drilling based on the fuzzy least squares(FLS)-support vector machine(SVM) was developed, in which the fuzzy membership function was set by using linear distance, and its parameters, such as penalty factor and kernel parameter, were optimized by using adaptive genetic algorithm. And FLS-SVM identification on rock and soil parameters for vibration drilling was made by changing the input/output data from single freedom degree model of drilling bit-rock. The results of identification simulation and resonance column experiment show that relative error of natural frequency for some hard sand from identification simulation and resonance column experiment is 1.1% and the identification precision based on the fuzzy least squares-support vector machine is high.展开更多
For the health monitoring of the offshore drilling platform in the salt-fog environment, three nonmetallic materials, i.e., silica, FR-4 epoxy board and sheet molding compound （SMC）, with the good anti-corrosion abi...For the health monitoring of the offshore drilling platform in the salt-fog environment, three nonmetallic materials, i.e., silica, FR-4 epoxy board and sheet molding compound （SMC）, with the good anti-corrosion ability were chosen as the packaging materials for the fiber Bragg grating （FBG） strain sensors. By selecting a highly sensitive structure of the fiber Bragg grating strain sensor, the performances of the sensors with three materials were investigated both numerically and experimentally. The strain sensitivities were 3.76pm/με, 3.02pm/με and 3.03pm/με, respectively. The linearity was better than 0.998. It provides useful information for developing sensors for the marine engineering.展开更多
文摘Non-contact measurements of machining temperatures were performed with optical pyrometer when drilling particle（B4C） reinforced metal matrix composites（MMCs） with different drills. The effect of particle content, cutting speed, feed rate and tool material on the maximum drilling temperature was investigated. The drilling parameters were optimized based on multiple performance characteristics in terms of the maximum cutting temperature and tool wear. According to the results, the most influential control factors on the cutting temperatures are found to be particle fraction, feed rate and interaction between the cutting speed and particle content, respectively. The influences of the cutting speed and drill material on the drilling temperature are found to be relatively lower for the used range of parameters. Minimum cutting temperatures are obtained with lower particle fraction and cutting speed, with relatively higher feed rates and carbide tools. The results reveal that optimal combination of the drilling parameters can be used to obtain both minimum cutting temperature and tool wear.
文摘Underground water （Borehole） has been the main alternative source of drinking water for most communities in my country. Previous studies have revealed high levels of contamination. The origin of which can be attributed to geochemical processes, combustion of fossil fuels, mining and anthropogenic activities. Most borehole water and well water in local communities of Nigeria are not safe for drinking due to heavy industrial and environmental pollution. This study was undertaken to assess the quality in some selected boreholes in the Port Harcourt metropolis for a period of two years. Borehole water samples were randomly collected from thirteen boreholes in a local community in plastic bottles （100 mL） in the months of September for the years of study （2010 ＆ 2011）. Four out of the seven heavy metals analyzed were found to be present in the first year of study. These were Fe, Cu, Mn and Zn. In the second year of study, Pb, Cr, Fe and Co were not detected in all of the samples except Cu and Fe which were present in only two samples. Mn and Zn were found to be present in all of the samples for both years of study.
基金Project(2012BAK09B02-05) supported by the National Key Technology R&D Program of China during the Twelfth Five-year PeriodProject(51274250) supported by the National Natural Science Foundation of China
文摘A single freedom degree model of drilling bit-rock was established according to the vibration mechanism and its dynamic characteristics. Moreover, a novel identification method of rock and soil parameters for vibration drilling based on the fuzzy least squares(FLS)-support vector machine(SVM) was developed, in which the fuzzy membership function was set by using linear distance, and its parameters, such as penalty factor and kernel parameter, were optimized by using adaptive genetic algorithm. And FLS-SVM identification on rock and soil parameters for vibration drilling was made by changing the input/output data from single freedom degree model of drilling bit-rock. The results of identification simulation and resonance column experiment show that relative error of natural frequency for some hard sand from identification simulation and resonance column experiment is 1.1% and the identification precision based on the fuzzy least squares-support vector machine is high.
文摘For the health monitoring of the offshore drilling platform in the salt-fog environment, three nonmetallic materials, i.e., silica, FR-4 epoxy board and sheet molding compound （SMC）, with the good anti-corrosion ability were chosen as the packaging materials for the fiber Bragg grating （FBG） strain sensors. By selecting a highly sensitive structure of the fiber Bragg grating strain sensor, the performances of the sensors with three materials were investigated both numerically and experimentally. The strain sensitivities were 3.76pm/με, 3.02pm/με and 3.03pm/με, respectively. The linearity was better than 0.998. It provides useful information for developing sensors for the marine engineering.
