Taking experimental path on disordering AuCuI（AAuCu8A4）composed of A Au8 and ACu4 stem alloy genes as an example, three discoveries and a method were presented. The ability of Au Cu I（AAu Cu8 A4）to keep structure ...Taking experimental path on disordering AuCuI（AAuCu8A4）composed of A Au8 and ACu4 stem alloy genes as an example, three discoveries and a method were presented. The ability of Au Cu I（AAu Cu8 A4）to keep structure stabilization against changing temperature is attributed to the fact that the AAu8 and ACu4 potential well depths greatly surpass their vibration energies, which leads to the subequilibrium of experimental path. A new atom movement mechanism of AuCuI（AAuACu84）to change structure for suiting variation in temperature is the resonance activating-synchro alternating of alloy genes, which leads to heterogeneous and successive subequilibrium transitions. There exists jumping order degree, which leads to the existence of jumping Tj-temperature and an unexpected so-called ＂retro-effect＂ about jumping temperature retrograde shift to lower temperatures upon the increasing heating rate. A set of subequilibrium holographic network path charts were obtained by the experimental mixed enthalpy path method.展开更多
Effect of thermal stabilization on the microstructure and mechanical property of directionally solidified Ti-46Al-0.5W-0.5Si （mole fraction, %） alloy was investigated. The specimens were thermal stabilized for diffe...Effect of thermal stabilization on the microstructure and mechanical property of directionally solidified Ti-46Al-0.5W-0.5Si （mole fraction, %） alloy was investigated. The specimens were thermal stabilized for different time （t） and directionally solidified at a constant growth rate of 30 μm/s and temperature gradient of 20 K/mm. Dependencies of the primary dendritic spacing （λ1）, secondary dendritic spacing （λ2）, interlamellar spacing （λL） and microhardness （HV） on holding time were determined. The values of the λ1, λ2 and λL increase with the increase of t, and the value of HV decreases with the increase of t. The increase of t is helpful to obtain a good directional solidification structure. However, it reduces the mechanical property of the directionally solidified TiAl alloy. The optimized value of t is about 30 min.展开更多
The phase equilibria in Co-rich region of Co-Ti-Ta system were studied.The microstructure and XRD analysis together with EDS determination show that L12 type Co3Ti phase and Laves_C36_Co3Ta phase get equilibrium with ...The phase equilibria in Co-rich region of Co-Ti-Ta system were studied.The microstructure and XRD analysis together with EDS determination show that L12 type Co3Ti phase and Laves_C36_Co3Ta phase get equilibrium with α-Co phase from 1 000 to 1 200 ℃.The Co3Ti phase possesses a solubility of Ta higher than 10%,and the addition of Ta stabilizes the Co3Ti phase.The isothermal sections of the Co-Ti-Ta system in the Co-rich region at 1 000,1 100 and 1 200 ℃ were constructed according to the result.展开更多
基金Project(51071181)supported by the National Natural Science Foundation of ChinaProject(2013FJ4043)supported by the Natural Science Foundation of Hunan Province,China
文摘Taking experimental path on disordering AuCuI（AAuCu8A4）composed of A Au8 and ACu4 stem alloy genes as an example, three discoveries and a method were presented. The ability of Au Cu I（AAu Cu8 A4）to keep structure stabilization against changing temperature is attributed to the fact that the AAu8 and ACu4 potential well depths greatly surpass their vibration energies, which leads to the subequilibrium of experimental path. A new atom movement mechanism of AuCuI（AAuACu84）to change structure for suiting variation in temperature is the resonance activating-synchro alternating of alloy genes, which leads to heterogeneous and successive subequilibrium transitions. There exists jumping order degree, which leads to the existence of jumping Tj-temperature and an unexpected so-called ＂retro-effect＂ about jumping temperature retrograde shift to lower temperatures upon the increasing heating rate. A set of subequilibrium holographic network path charts were obtained by the experimental mixed enthalpy path method.
基金Projects (50801019, 51071062, 50771041) supported by the National Natural Science Foundation of ChinaProject (2011CB605504) supported by the National Basic Research Program of China
文摘Effect of thermal stabilization on the microstructure and mechanical property of directionally solidified Ti-46Al-0.5W-0.5Si （mole fraction, %） alloy was investigated. The specimens were thermal stabilized for different time （t） and directionally solidified at a constant growth rate of 30 μm/s and temperature gradient of 20 K/mm. Dependencies of the primary dendritic spacing （λ1）, secondary dendritic spacing （λ2）, interlamellar spacing （λL） and microhardness （HV） on holding time were determined. The values of the λ1, λ2 and λL increase with the increase of t, and the value of HV decreases with the increase of t. The increase of t is helpful to obtain a good directional solidification structure. However, it reduces the mechanical property of the directionally solidified TiAl alloy. The optimized value of t is about 30 min.
基金Project (50771027) supported by the National Natural Science Foundation of China
文摘The phase equilibria in Co-rich region of Co-Ti-Ta system were studied.The microstructure and XRD analysis together with EDS determination show that L12 type Co3Ti phase and Laves_C36_Co3Ta phase get equilibrium with α-Co phase from 1 000 to 1 200 ℃.The Co3Ti phase possesses a solubility of Ta higher than 10%,and the addition of Ta stabilizes the Co3Ti phase.The isothermal sections of the Co-Ti-Ta system in the Co-rich region at 1 000,1 100 and 1 200 ℃ were constructed according to the result.
