内蒙古商都县双井子层控金矿床的成矿流体特征

内蒙古双井子金矿为赋存于浅变质含碳细碎屑岩系地层中的层控型金矿床,其直接赋矿围岩为白云鄂博群中的比鲁特组碳质板岩/碳质千枚状板岩和褐铁矿化的石英岩。这种浅变质含碳细碎屑岩系中广泛存在多期次与金矿化相关的石英脉。本文划分这些与金矿化相关的石英脉体的期次,应用冷热台和原位激光拉曼光谱等分析技术,探讨双井子层控金矿的成矿流体特征。结果表明,根据石英脉体野外穿插关系可将其划分为两个期次:第Ⅰ期是产于比鲁特组碳质板岩中的顺层石英脉,第Ⅱ期石英脉产于比鲁特组褐铁矿化的石英岩中,部分为切过第Ⅰ期碳质板岩顺层石英脉的石英细脉。流体包裹体均一温度集中在180℃~280℃,盐度集中在4.0 wt%Na Clequiv^15.0wt%Na Clequiv,流体的密度范围0.76 g/cm^3~0.98 g/cm^3,推测双井子金矿为中低温、中低盐度层控型热液矿床。激光Raman光谱分析结果表明,双井子矿区成矿流体属于CO_2-CH_4-SO_2-H_2O-NaCl体系。两期流体均具有中低温、中低盐度及弱还原性的特征,且成分复杂,第Ⅰ期可能为深源岩浆与浅部壳体岩层相互反应而产生的混源流体,使地层中成矿组分发生弱富集;第Ⅱ期为主成矿期,其流体很有可能是区内混合了地表水的岩浆期后热液。

西秦岭夏河—合作地区与还原性侵入岩有关的金成矿系统及其动力学背景和勘查意义

西秦岭造山带是我国最重要的金成矿带之一。以往研究大多认为造山型金矿床和(类)卡林型金矿床是西秦岭主要的金矿床类型,并且两类金矿床的金成矿作用主要与造山过程中的区域变质作用有关,而与岩浆活动不存在直接的成因联系。位于西秦岭造山带西段的夏河-合作地区大面积出露花岗岩类侵入体,其周缘发育有富金的夕卡岩型铜(钨)矿床。近年来该地区新发现的多个大型-超大型石英脉型金矿床和微细粒浸染型金矿床都与中酸性侵入岩的空间关系紧密,暗示这些金矿床可能和岩浆活动有成因联系。论文在作者研究结果以及总结前人成果基础上,综述了夏河-合作地区典型金(铜)矿床的地质矿化特征、地球化学特征、时空分布特征,以及中酸性侵入岩的岩性特征、形成时代和演化过程。年代学研究结果显示,夏河-合作地区的早子沟微细粒浸染型金矿床、德乌鲁夕卡岩型金(铜)矿床和老豆石英脉型金矿床均形成于250~240 Ma,与邻近的早中三叠世花岗闪长质-石英闪长质侵入岩近于同时形成。拉布在卡等石英脉型金矿床略晚于区内中三叠世末期侵位的闪长玢岩脉(约230~225Ma)形成。H、O、S、C、B、Pb等多种同位素地球化学特征指示该地区早中三叠世金矿床的成矿热液均为岩浆来源,并且显示低氧逸度的特征。早中三叠世中酸性侵入岩的还原性钛铁矿系列花岗岩类特征,以及同时代的多种金矿化类型和成矿分带性,表明夏河-合作地区在早中三叠世(约250~230Ma)多期次侵位的钛铁矿系列I型中酸性岩浆是金成矿作用的成矿流体和成矿物质的主要来源,其中与250~240Ma多期金成矿事件有关的准铝质-弱过铝质、高钾钙碱性系列花岗岩类侵入岩均经历了幔源基性熔体和壳源酸性熔体的岩浆混合作用,而与约230Ma的金成矿作用有关的闪长质岩浆岩则可能指示了更多幔源基性熔体的加入。与金(铜)成矿有关的早中三叠世还原性中酸性岩是在古特提斯洋俯冲过程中局部弧后伸展条件下交代富集地幔楔部分熔融形成的基性岩浆与壳源酸性岩浆混合作用的产物。夏河-合作地区形成于早中三叠世的夕卡岩型、电气石-石英脉型、石英-方解石脉型和微细粒浸染型金矿床共同构成了一个与还原性侵入岩有关的金成矿系统。夏河-合作地区与还原性侵入岩有关的金成矿系统的发现,丰富了西秦岭造山带区域成矿作用的类型,并为西秦岭西段其他早中三叠世岩浆岩分布区(如青海同仁地区)的金矿勘查工作提供了新的思想和方向。

CSAMT法在珲春市金泉岗砾岩型金矿体勘查中的应用

可控源音频大地电磁测深法(简称CSAMT法)是以有限长接地电偶极子为场源,在距偶极中心一定距离处同时观测电、磁场参数的一种电磁测深方法。珲春市金泉岗区内分布有第三系土门子组含金砾岩层,找矿潜力较大。采用CSAMT法在本区对砾岩型金矿体进行勘查。

First-Principles Insights into Pt_(n)/ZnO(0001)Catalyst:Regulation of Metal-Support Interaction through Surface Polarity

Polar surfaces are prevalent in metal oxides,the interactions between surface species with polar surfaces are different from those with non-polar surfaces,a thorough understanding of the interactions is key to regulate the performance of heterogeneous catalysts.In this work,we delve into the interaction of Pt_(n)(n=1-4)with polar ZnO(0001)-Zn and ZnO(0001)-O,and the influence of the surface polarity on the electronic structures and reactivity of Pt_(n)by using density functional theory calculations.The results suggest distinct differences in electronic structures of two exposed terminations,leading to different interactions with Pt_(n).The interaction between Pt_(n)and two terminations not only stabilizes the surface and clusters through polar compensation,but also induces opposite charges on the cluster at two terminations.Remarkably,the Pearson correlation coefficient reveals the interdependency between the electronic states of Pt_(n)and its performance in terms of small molecule adsorption/activation.These observations demonstrate the crucial role of surface polarity in regulating the electronic states and catalytic performance of active sites,and offer a possible design principle for supported catalysts.

Effects of mutation on a new strain Leptospirillum ferriphilum YXW and bioleaching of gold ore

Leptospirillum ferriphilum YXW was isolated through serial dilution from mixed microorganisms enriched in AMD from Dexing copper mine in Jiangxi Province, China. It was mutated by ultrasonic, UV and microwave to collect more efficient strain for bioleaching of gold ore. Physiological and biochemical characteristics indicate that strain YXW is a strict chemoautotrophic microorganism, and the optimal condition for its growth is temperature of 40 °C and pH 1.5. After mutation by ultrasonic, UV and microwave, the density of bacterial cells reached 9×109, 8.4×109 and 4.3×108 mL-1, increased by 291%, 265%and 87%, respectively, compared with the original culture. The bacterial total protein activity was improved by microwave and UV mutations, but was reduced by ultrasonic. Mutations had effects on bioleaching of gold ore in sequence of microwave〉UV〉ultrasonic. During gold ore bioleaching, the bacterial mutant after mutation by microwave had the best effect on the extraction rates of arsenic and iron, which were 19.6%and 17.7%higher than that of the original strain after bioleaching for 10 d, respectively. The results suggested that the effects of mutation on bioleaching of gold ore may not be mainly due to increase of bacterial cells density, but may be mainly attributed to the improvement of bacterial total protein activity.

Influence of Phanerochaete chrysosporium on degradation and preg-robbing capacity of activated carbon

The effect of Phanerochaete chrysosporium on degradation and preg-robbing capacity of activated carbon,which was used as a substitute of carbonaceous matter in carbonaceous gold ores,was studied.After 14 d treatment with Phanerochaete chrysosporium,the degradation rate of activated carbon reached 27.59%.The XRD and FTIR analyses indicate that Phanerochaete chrysosporium can distort the micro-crystalline structure of activated carbon,increase the number of oxygen-containing groups and aliphatics and make the aromatic structures be oxidized and exfoliated.The gold-adsorption tests show that Phanerochaete chrysosporium can reduce the preg-robbing capacity of activated carbon by 12.88%.This indicates that Phanerochaete chrysosporium is an available microorganism,and it can be employed to reduce the preg-robbing capacity of carbonaceous matter and improve the gold leaching rate.The combined effect of passivation,alkalization and oxidation of biological enzymes-free radicals of Phanerochaete chrysosporium on carbonaceous matter was also discussed.

Effects of magnesium and cooling rate on titanium phase transformation for production of TiO_2

X-ray diffraction（XRD） and crystal structure analysis were used to study the effects of Mg content and cooling rate on the titanium phase transformation of three types of titanium slag. The results indicate that in the rapid cooling process, the titanium phase is anosovite, whose chemical formula is MgnTi（3-n）O5（0n1）. In the slow cooling process, when the Mg content is high, anosovite transforms into karrooite MgTi2O5 structure; when the Mg content is low, karrooite MgTi2O5 and rutile TiO2 both exist. The stability of karrooite MgTi2O5 is better than that of anosovite MgnTi（3-n）O5. Slow cooling contributes to the doping of Mg into the anosovite crystal and stabilises the anosovite crystal structure.

Diversity of microbial community at acid mine drainages from Dachang metals-rich mine, China

Two acid mine drainage(AMD)samples TS and WK,which were from the Dachang metals-rich mine in Guangxi province,China,were studied using PCR-based cloning approach.A total of 44 operational taxonomic units(OTUs)were obtained from the two AMD samples.However,only three OTUs(GXDC-9,GXDC-19 and GXDC-50)detected in sample TS can also be observed in sample WK.Phylogenetic analysis revealed that the bacteria in the two samples fell into four putative divisions,which were Nitrospira,Alphaproteobacteria,Gamaproteobacteria,and Acidobacteria.Organisms of genuses Acidithiobacillus and Leptospirillum,which were in gamaproteobacteria class and Nitrospira family,were dominant in two samples,respectively.In sample TS,which was characterized by low pH,high sulfate,high iron,and high arsenide,two species(Acidithiobacillus ferrooxidans and Leptospirillum ferrooxidans)constituted 98.22% of the entire microbial community.Compared with sample TS,the microbial community in sample WK was more diversified according to the observation.Interestedly,the Legionella species,which was rarely observed in the low-pH environment,was detected in sample WK.This work helps us to further understand the diversity of microbial community living in extreme acid mine drainages with unique geochemistry and the tolerance capability of acidophiles to heavy metal.

Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties

Pelletization of hematite ore requires high fineness and very high induration temperature（~1325 ℃） owing to its poor diffusion bonding unlike magnetite ore. Further, high-alumina hematite pellets show very high reduction degradation index（RDI） during low temperature（500-650 ℃） reduction due to their volume expansion and lattice distortion. Noamundi（India） hematite ore contains very high Al2O3（2.3%） with adverse ratio of alumina to silica（~2） for which, it shows very high RDI. In this work, the acid pellets prepared from Noamundi ore fines of optimum Blaine fineness show good cold crushing strength（CCS）. However, it shows very high RDI（77%）. In order to reduce RDI, Mg O in form of two different gangue-containing fluxes, such as pyroxenite and olivine in varying quantities has been added. The optimum requirement and performance of these fluxes has been examined and compared. Both pyroxenite and olivine fluxed pellets show significant lowering of RDI（26% and 23%, respectively） and improvement of other properties, viz CCS, swelling indices etc with good reducibility（70%-77%）. Finally, a good quality acidic hematite pellet was developed from high-alumina ore without using any lime which is very important charge material in combination of basic sinter in blast furnace.

Valence variation of arsenic in bioleaching process of arsenic-bearing gold ore

The concentration and variational trend of As3 +and As 5+,the bacterial resistance for the As 3+and As 5+and converting conditions from As3 +to As 5+were analyzed.The additive was used to prompt the bacterial leaching efficiency by changing valence state of arsenic.The results show that the concentration of As 3+ is larger than that of As 5+ in the lag phase.The concentration of As 3+ decreases in the log phase,and is lower than that of As5 +.HQ-0211 typed bacteria express better resistance for As 3+and As 5+and remain growing when the concentrations of As3 +and As 5+are above 6.0 g/L and 12.0 g/L,respectively.It is found that Fe 3+cannot oxidize As3 +singly as strong oxidant in the leaching system,but can cooperate with pyrite or chalcopyrite to do that.The oxidation of As 3+ is prompted with addition of H2O2.The bacterial activity is improved in favor of bacterial leaching efficiency.NaClO restrains the bacterial growth to depress leaching efficiency because of the chloric compounds affecting bacterial activity.

Sulfide mineral bioleaching:Understanding of microbe-chemistry assisted hydrometallurgy technology and acid mine drainage environment protection

Bioleaching is regarded as an essential technology to treat low grade minerals,with the distinctive superiorities of lower-cost and environment-friendly compared with traditional pyrometallurgy method.However,the bioleaching efficiency is unsatisfactory owing to the passivation film formed on the minerals surface.It is of particular interest to know the dissolution and passivation mechanism of sulfide minerals in the presence of microorganism.Although bioleaching can be useful in extracting metals,it is a double-edged sword.Metallurgical activities have caused serious environmental problems such as acid mine drainage(AMD).The understanding of some common sulfide minerals bioleaching processes and protection of AMD environment is reviewed in this article.

ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

Adsorption capacity of ACFF in cyanide leaching liquor of gold ores was studied with cyanide leaching liquor of gold ores, containing various kinds of ions. The adsorbed leaching liquor was analyzed by atomic emission spectroscopy and colorimetric method. The contents of various kinds of ions in ACFF were determined with X-ray photoctron spectroscopy. ACFF not only adsorbed gold but also adsorbed arsenic, nickel, zinc, calcium, sulphur, bismuth, copper, iron, silver and cyanide anion. Atomic percentage of C and those of O, N, Zn, Fe increase and decrease respectively with the increase of the layer depth, while those of Ca, Au, Ag keep constant.

Heavy Metals in a Sulfldic Minespoil: Fractions and Column Leaching

Fractions of various heavy metals in a sulfidic minespoil were investigated. Column leaching experimentwas also conducted to simulate 'acid mine drainage' (AMD) from the minespoil. The results show thatleaching of heavy metals from the minespoil was extremely significant during the initial water flushing.The amounts of heavy metals leached out dramatically reduced after leaching twice. It is worthwhile tonote that in this study, Zn, Mn, Fe, As and Ni in the first leachate exceeded the total amount of eachcorresponding water-extractable (1:5, soil:water) metal contained in the minespoil sample. This appears tosuggest that 1:5 water extraction did not allow accurate estimation of water-leachable concentrations of theabove heavy metals. This work has implications for the management of sulfidic minespoils. Acid drainageof great environmental concerns is likely to occur only during heavy rainfall events after substantial solubleand readily exchangeable acid and metals are accumulated in the minespoils. The slow-reacting fractionsother than water-soluble and readily exchangeable fractions may pose little environmental hazards. This isparticularly true for Pb, As and Ni.

Co-intensification of gold leaching with heavy metals and hydrogen peroxide

Co-intensification was researched to accelerate gold leaching with regards to its electrochemical nature by using anodic intensifiers of heavy metal ions (Pb2+,Bi3+,Tl+,Hg2+ and Ag+) on the basis of hydrogen peroxide assistant leaching on three different types of materials which were classified as a refractory sulphide gold concentrate,an easily leachable sulphide gold concentrate,and a low grade oxide gold ore according to their leaching characteristics.The results showed that,favorable co-intensification effects on the three materials were obtained and leaching time of gold was effectively shortened to no longer than 12 h from 16 to 24 h for hydrogen peroxide assistant leaching.For the five tested heavy metal ions,Bi3+and Tl+ presented co-intensifying effect on all the three materials,and Hg2+ caused co-intensifying effect on both refractory and easily leachable sulphide gold concentrates,and Pb2+ and Ag+ only had co-intensifying effect on the easily leachable sulphide gold concentrate.

Analysis of microseismic activity in rock mass controlled by fault in deep metal mine

Aiming at evaluating the stability of a rock mass near a fault,a microseismic(MS) monitoring system was established in Hongtoushan copper mine.The distribution of displacement and log(/),the relationship between MS activity and the exploitation process,and the stability of the rock mass controlled by a fault were studied.The results obtained from microseismic data showed that MS events were mainly concentrated al the footwall of the fault.When the distance to the fault exceeded 20 m,the rock mass reached a relatively stable state.MS activity is closely related to the mining process.Under the strong disturbance from blasting,the initiation and propagation of cracks is much faster.MS activity belongs in the category of aftershocks after large scale excavation.The displacement and log(C/) obtained from MS events can reflect the difference in physical and mechanical behavior of different areas within the rock mass,which is useful in judging the integrity and degradation of the rock mass.

Effect of additives on growth of ferronickel grains and metal-slag separation behavior

Na_(2)S,Na_(2)CO_(3),FeO,FeS and carbon were used to regulate the properties of slag or metal fractions,and their effects on metal growth and metal–slag separation behavior were investigated.The growth of ferronickel grains can be enhanced by adding these additives,and Na_(2)S was the most effective.Na_(2)S,Na_(2)CO_(3) and FeO mainly affected the properties of slag,while carbon and FeS affected the metal fraction.The onset temperature of metal–slag separation was 1297℃ for the sample without additive,which was decreased to 1123 and 1101℃ after adding 3.30 wt.%Na_(2)S and 4.47 wt.%Na_(2)CO_(3),respectively.The onset temperature of metal–slag separation was mainly controlled by the slag fraction.The average apparent activation energy of metal grain growth was 125.32 kJ/mol without additive,and it decreased obviously after adding different additives.Na_(2)S also had the most remarkable effect on the decrease in activation energy.

Effect of loess for preventing contamination of acid mine drainage from coal waste

Acid mine drainage （AMD） that releases highly acidic, sulfate and metals-rich drainage is a serious environmental problem in coal mining areas in China. In order to study the effect of using loess for preventing AMD and controlling heavy metals contamination from coal waste, the column leaching tests were conducted. The results come from experiment data analyses show that the loess can effectively immobilize cadmium, copper, iron, lead and zinc in AMD from coal waste, increase pH value, and decrease Eh, EC, and 8024- concentrations of AMD from coal waste. The oxidation of sulfide in coal waste is prevented by addition of the loess, which favors the generation and adsorption of the alkalinity, the decrease of the population of Thiobacillusferrooxidans, the heavy metals immobilization by precipitation of sulfide and carbonate through biological sul- fate reduction inside the column, and the halt of the oxidation process of sulfide through iron coating on the surface of sulfide in coal waste. The loess can effectively prevent AMD and heavy metals contamination from coal waste in in-situ treatment systems.

Bioleaching of low-grade copper sulfide ore by extremely thermoacidophilic consortia at 70℃in column reactors

The effects of introducing M.sedula derivatives having different Cu^2+-resistance on bioleaching capacity of a defined consortium(consisting of A.brierleyi DSM1651 and M.hakonensis HO1-1)were studied in column reactors at 70℃.Introducing M.sedula copA mutant,a copper sensitive derivative,only had negligible effects on bioleaching.While introducing M.sedula ARS50-2,a Cu^2+resistant strain,substantially consolidated bioleaching process,with 27.77%more copper recovered after 58 d of bioleaching.Addition of M.sedula ARS50-2 likely enhanced the sulfur oxidation capacity of consortium after the 24th day under the Cu^2+stress.The majority of extreme thermoacidophiles were attached on minerals surface as indicated by quantitative PCR(qPCR)data.Successions of microbial community of extremely thermoacidophilic consortia that attached on surface of minerals were different from those in leachate.M.hakonensis HO1-1 was the dominant species attached on minerals surface in each column reactor throughout bioleaching process.The sessile M.sedula ARS50-2 remained as a major species till the 34th day.A.brierleyi DSM1651 was the most abundant planktonic species in leachate of each column reactor.These results highlight that higher Cu^2+-resistance is a beneficial trait for extreme thermoacidophiles to process copper minerals.

Numerical analysis of stability for mined-out area in multi-field coupling

There were differences between real boundary and blast hole controlling boundary of irregular mined-out area in underground metal mines. There were errors in numerical analysis of stability for goaf, if it was analyzed as regular 3D mined-out area and the influence of coupling stress-seepage-disturbance was not considered adequately. Taking a lead zinc mine as the background, the model was built by the coupling of Surpac and Midas-Gts based on the goaf model precisely measured by CMS.According to seepage stress fundamental equations based on the equivalent continuum mechanical and the theory about equivalent load of dynamic disturbance in deep-hole blasting, the stability of mined-out area under multi-field coupling of stress-seepage-dynamic disturbance was numerically analyzed. The results show that it is more consistent between the numerical analysis model based on the real model of irregular 3D shape goaf and the real situation, which could faithfully reappear the change rule of stress–strain about the surrounding rock under synthetic action of blasting dynamic loading and the seepage pressure. The mined-out area multi-field coupling formed by blasting excavation is stable. Based on combination of the advantages of the CMS,Surpac and Midas-Gts, and fully consideration of the effects of multi-field coupling, the accurate and effective way could be provided for numerical analysis of stability for mined-out area.