The utilization of arsenic-containing gold dressing tailings is an urgent issue faced by gold production companies worldwide.The thermodynamic analysis results indicate that ferrous arsenate(FeAsO_(4)),pyrite(FeS_(2))...The utilization of arsenic-containing gold dressing tailings is an urgent issue faced by gold production companies worldwide.The thermodynamic analysis results indicate that ferrous arsenate(FeAsO_(4)),pyrite(FeS_(2))and sodium cyanide(NaCN)in the arsenic-containing gold metallurgical tailings can be effectively removed using straight grate process,and the removal of pyrite and sodium cyanide is basically completed during the preheating stage,while the removal of ferrous arsenate requires the roasting stage.The pellets undergo a transformation from magnetite to hematite during the preheating process,and are solidified through micro-crystalline bonding and high-temperature recrystallization of hematite(Fe_(2)O_(3))during the roasting process.Ultimately,pellets with removal rates of 80.77% for arsenic,88.78% for sulfur,and 99.88% for cyanide are obtained,as well as the iron content is 61.1% and the compressive strength is 3071 N,meeting the requirements for blast furnace burden.This study provides an industrially feasible method for treating arsenic-containing gold smelting tailings,benefiting gold production enterprises.展开更多
A complex lead-zinc-silver sulfide ore containing 2.98% Pb, 6.49% Zn and 116.32×10^-4 % Ag （mass fraction） from Yunnan Province, China, was subjected to this work. Research on mineral processing was conducted a...A complex lead-zinc-silver sulfide ore containing 2.98% Pb, 6.49% Zn and 116.32×10^-4 % Ag （mass fraction） from Yunnan Province, China, was subjected to this work. Research on mineral processing was conducted according to the properties of the lead-zinc-silver ore. Under low alkalinity condition, the lead minerals are successfully separated from the zinc minerals with new reagent YZN as zinc depressant, new reagent BPB as lead collector, CuSO4 as zinc activator and ethyl xanthate as zinc collector. The associated silver is mostly concentrated to the lead concentrate. With the process utilized in this work, a lead concentrate of 51.90% Pb with a recovery of 82.34% and a zinc concentrate of 56.96% Zn with a recovery of 81.98% are produced. The silver recovery in the lead concentrate is 80.61%. Interactions of flotation reagents with minerals were investigated, of which the results indicate that the presence of proper amount of Na2S can precipitate Pb^2＋ and has a sulfidation on oxidized lead minerals. The results also show that NazCO3 and YZN used together as combined depressants for sphalerite can signally improve the depressing effect of new reagent YZN on sphalerite.展开更多
Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with...Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with favorable mechanical strength and thermal stability. Studies were carried out to investigate the affecting factors and conditions on the preparation and properties of DLPs. The results show that moisture content has significant influence on DLPs preparation. With the increase of moisture content in the range of no more than 9.8%, drop resistance and compressive strength of green DLPs are raised and the pelletizing dynamics is improved accordingly. The optimum conditions are determined as moisture content of 9.8%, coating time of 14-16 min, drying temperature 〈80 ℃and drying gas velocity 〈1.2 m/s. When DLPs prepared under these conditions are roasted at 600 ℃ for 1 h, favorable removal and solidifying rates can be obtained, in which the removal rates of arsenic and sulfur are 94.38% and 82.55%, and the solidifying rates of arsenic and sulfur reach 99.62% and 99.79%, respectively. These results promise industrial application of DLP roasting.展开更多
Through analysis of geological characteristics of the gold deposit,the shape,occurrence,and spatial distribution of ore-controlling fault plane in the Shanhou mining area were investigated,and the regularities of enri...Through analysis of geological characteristics of the gold deposit,the shape,occurrence,and spatial distribution of ore-controlling fault plane in the Shanhou mining area were investigated,and the regularities of enrichment and emplacement of ore body were summarized. The analysis shows that the Shanhou gold deposit was controlled by NE-NNE Zhaoping fault zone; the fault gouge developed in fault zone provides a barrier to ore-bearing hydrothermal solution,and the industrial ore body is all distributed within 40 m of footwall of main fault plane. The industrial ore body is mainly enriched in the NE positions of fault where the deep dips changed to flat dips,and shows the obvious regularity of NE lateral trending with angle around 75°. The stress analysis of fault in mineralization epoch showed that the ore-controlling structure presented the characteristics of righthanded rotation inverse-fault activity in mineralization epoch,and the host space tended to occur in NE regional tension positions where the dips become flat in the strike of fault,causing emplacement of ore body. It is thought by combining equal interval distribution of deposit with spatial variation of industrial ore body and orecontrolling fault structure that the Shanhou gold deposit recurred in regularity and the non-ore interval occurred in the ore body. Meanwhile,it is predicted that the favorable target area of prospecting lies in the areas of deep main fault plane with NE strike( > 30°) and the deep dips changing to flat dips in the Shanhou mining area,and the prospecting should be emphasized. The favorable deep mineralization prospect exists in middle Beibo mining area,where is the key area for future prospecting.展开更多
Greece, in relation to many other countries of similar size, is very advantageous for the mineral wealth it possesses. Great variety, mostly industrial and metallic minerals, and energy mineral raw materials such as l...Greece, in relation to many other countries of similar size, is very advantageous for the mineral wealth it possesses. Great variety, mostly industrial and metallic minerals, and energy mineral raw materials such as lignite, are in its subsoil. The probable and proven reserves of most of the mineral resources of Greece are unknown, as detailed investigations （e.g., drillings, measurements, analyses, etc.） are lacking. In our assessment the total value of the reserves is about ε1.5 trillion and is four times its total debt （ε360 billion）. The total value of the indicated reserves of the Industrial Minerals ＆ Rocks is ε60 billion. The total value of the indicated reserves of the Metallic Minerals is ε72 billion. The total value of the indicated reserves of the Energy Mineral Raw Materials is ε1,362 billion, of which ε268 billion belong to the lignites which are exploited for decades to produce only electricity. The indicated oil reserves are 10 billion barrels with current value of E685 billion and the corresponding of natural gas 3.5 trillion m3 with current value of ε409 billion.展开更多
基金Project(52274343)supported by the National Natural Science Foundation of ChinaProjects(2023YFC3903900,2023YFC3903904)supported by the National Key R&D Program of China。
文摘The utilization of arsenic-containing gold dressing tailings is an urgent issue faced by gold production companies worldwide.The thermodynamic analysis results indicate that ferrous arsenate(FeAsO_(4)),pyrite(FeS_(2))and sodium cyanide(NaCN)in the arsenic-containing gold metallurgical tailings can be effectively removed using straight grate process,and the removal of pyrite and sodium cyanide is basically completed during the preheating stage,while the removal of ferrous arsenate requires the roasting stage.The pellets undergo a transformation from magnetite to hematite during the preheating process,and are solidified through micro-crystalline bonding and high-temperature recrystallization of hematite(Fe_(2)O_(3))during the roasting process.Ultimately,pellets with removal rates of 80.77% for arsenic,88.78% for sulfur,and 99.88% for cyanide are obtained,as well as the iron content is 61.1% and the compressive strength is 3071 N,meeting the requirements for blast furnace burden.This study provides an industrially feasible method for treating arsenic-containing gold smelting tailings,benefiting gold production enterprises.
基金Project(50874117) supported by the National Natural Science Foundation of China
文摘A complex lead-zinc-silver sulfide ore containing 2.98% Pb, 6.49% Zn and 116.32×10^-4 % Ag （mass fraction） from Yunnan Province, China, was subjected to this work. Research on mineral processing was conducted according to the properties of the lead-zinc-silver ore. Under low alkalinity condition, the lead minerals are successfully separated from the zinc minerals with new reagent YZN as zinc depressant, new reagent BPB as lead collector, CuSO4 as zinc activator and ethyl xanthate as zinc collector. The associated silver is mostly concentrated to the lead concentrate. With the process utilized in this work, a lead concentrate of 51.90% Pb with a recovery of 82.34% and a zinc concentrate of 56.96% Zn with a recovery of 81.98% are produced. The silver recovery in the lead concentrate is 80.61%. Interactions of flotation reagents with minerals were investigated, of which the results indicate that the presence of proper amount of Na2S can precipitate Pb^2＋ and has a sulfidation on oxidized lead minerals. The results also show that NazCO3 and YZN used together as combined depressants for sphalerite can signally improve the depressing effect of new reagent YZN on sphalerite.
基金Project(51074182)supported by the National Natural Science Foundation of ChinaProject(201012200032)supported by the Fundamental Research Funds for the Central Universities,China
文摘Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with favorable mechanical strength and thermal stability. Studies were carried out to investigate the affecting factors and conditions on the preparation and properties of DLPs. The results show that moisture content has significant influence on DLPs preparation. With the increase of moisture content in the range of no more than 9.8%, drop resistance and compressive strength of green DLPs are raised and the pelletizing dynamics is improved accordingly. The optimum conditions are determined as moisture content of 9.8%, coating time of 14-16 min, drying temperature 〈80 ℃and drying gas velocity 〈1.2 m/s. When DLPs prepared under these conditions are roasted at 600 ℃ for 1 h, favorable removal and solidifying rates can be obtained, in which the removal rates of arsenic and sulfur are 94.38% and 82.55%, and the solidifying rates of arsenic and sulfur reach 99.62% and 99.79%, respectively. These results promise industrial application of DLP roasting.
基金Project of Shanhou Gold Deposit of Laixi of Shandong Province(SDLX2012-3-28)
文摘Through analysis of geological characteristics of the gold deposit,the shape,occurrence,and spatial distribution of ore-controlling fault plane in the Shanhou mining area were investigated,and the regularities of enrichment and emplacement of ore body were summarized. The analysis shows that the Shanhou gold deposit was controlled by NE-NNE Zhaoping fault zone; the fault gouge developed in fault zone provides a barrier to ore-bearing hydrothermal solution,and the industrial ore body is all distributed within 40 m of footwall of main fault plane. The industrial ore body is mainly enriched in the NE positions of fault where the deep dips changed to flat dips,and shows the obvious regularity of NE lateral trending with angle around 75°. The stress analysis of fault in mineralization epoch showed that the ore-controlling structure presented the characteristics of righthanded rotation inverse-fault activity in mineralization epoch,and the host space tended to occur in NE regional tension positions where the dips become flat in the strike of fault,causing emplacement of ore body. It is thought by combining equal interval distribution of deposit with spatial variation of industrial ore body and orecontrolling fault structure that the Shanhou gold deposit recurred in regularity and the non-ore interval occurred in the ore body. Meanwhile,it is predicted that the favorable target area of prospecting lies in the areas of deep main fault plane with NE strike( > 30°) and the deep dips changing to flat dips in the Shanhou mining area,and the prospecting should be emphasized. The favorable deep mineralization prospect exists in middle Beibo mining area,where is the key area for future prospecting.
文摘Greece, in relation to many other countries of similar size, is very advantageous for the mineral wealth it possesses. Great variety, mostly industrial and metallic minerals, and energy mineral raw materials such as lignite, are in its subsoil. The probable and proven reserves of most of the mineral resources of Greece are unknown, as detailed investigations （e.g., drillings, measurements, analyses, etc.） are lacking. In our assessment the total value of the reserves is about ε1.5 trillion and is four times its total debt （ε360 billion）. The total value of the indicated reserves of the Industrial Minerals ＆ Rocks is ε60 billion. The total value of the indicated reserves of the Metallic Minerals is ε72 billion. The total value of the indicated reserves of the Energy Mineral Raw Materials is ε1,362 billion, of which ε268 billion belong to the lignites which are exploited for decades to produce only electricity. The indicated oil reserves are 10 billion barrels with current value of E685 billion and the corresponding of natural gas 3.5 trillion m3 with current value of ε409 billion.
