Bacterial leaching of single sulfide minerals and polymetallic sulfide ores was operated in shake flasks and small-scaled columns.The results show that bioleaching of jamesonite is not accessible,the iron extraction r...Bacterial leaching of single sulfide minerals and polymetallic sulfide ores was operated in shake flasks and small-scaled columns.The results show that bioleaching of jamesonite is not accessible,the iron extraction rate of pyrrhotite bioleaching reaches 98.2% after 26 d,and the zinc extraction rate of marmatite bioleaching reaches 92.3%,while the corresponding iron extraction reaches only 13.6% after 29 d.Pulp density has a significant effect on metal extraction of pyrrhotite and marmatite bioleaching.The corresponding metal extraction rate decreases with the increase of pulp density.For the polymetallic sulfide ores,zinc extraction of 97.1% is achieved after bioleaching in shake flasks for 10 d,while only 7.8% is obtained after bioleaching in small-scaled column.Analytical results of scanning electron microscopy(SEM) and energy dispersive X-ray analysis(EDX) reveal that large amount of calcium sulfate is formed on the mineral surface.展开更多
The results of investigation of micromineralogy of disseminated-sulphide gold ore deposits of the Yana-Kolyma belt; the investigation was conducted via electron microscopy using a QEMSCAN （Quantitative Evaluation of ...The results of investigation of micromineralogy of disseminated-sulphide gold ore deposits of the Yana-Kolyma belt; the investigation was conducted via electron microscopy using a QEMSCAN （Quantitative Evaluation of Minerals by Scanning Electron Microscopy） hardware and software instrument equipped with a Quantax quantitative analysis system. The following micro-mineral phases have been detected： native gold and silver, selenides of Au and Ag （naumanite and fishesserite （？）, hessite, sulfoarsenides of Ni and Co （gersdorffite, cobaltite, rammelsbergite）, molibdenite and platinum group minerals. Our findings in disseminated sulfide ores selenides of Au and Ag, and molybdenite, together with the findings of platinum group minerals and Ni and Co, emphasize the ＂black shale＂ specifics character of these types of deposits.展开更多
The presented results are related to the leaching of Pb-Zn-Cu-Fe sulphide concentrate, obtained from barite-sulphide ores, under the elevated temperatures and pressures in an autoclave. The leaching process was perfor...The presented results are related to the leaching of Pb-Zn-Cu-Fe sulphide concentrate, obtained from barite-sulphide ores, under the elevated temperatures and pressures in an autoclave. The leaching process was performed using the sulphur acid solution with the oxygen addition for the separation of the targeted metals from the polymetallic concentrate. In this process influences of various parameters were discussed and then correlated to the leached metals, zinc, copper and iron. Zinc, copper and iron were dissolved in a solution, while lead remained as insoluble in the leach residue. The best leaching results were determined under the temperature of 210 ℃ during the 240 min. Obtained leaching degrees were 98% zinc, 95% copper and 96% iron.展开更多
基金Project(51374248) supported by the National Natural Science Foundation of ChinaProject(NCET-13-0595) supported by Program for New Century Excellent Talents in University,China+1 种基金Project(2012AA061501) supported by the National High Technology Research and Development Program of ChinaProject(20120162120010) supported by the Research Fund for the Doctoral Program of Higher Education of China
文摘Bacterial leaching of single sulfide minerals and polymetallic sulfide ores was operated in shake flasks and small-scaled columns.The results show that bioleaching of jamesonite is not accessible,the iron extraction rate of pyrrhotite bioleaching reaches 98.2% after 26 d,and the zinc extraction rate of marmatite bioleaching reaches 92.3%,while the corresponding iron extraction reaches only 13.6% after 29 d.Pulp density has a significant effect on metal extraction of pyrrhotite and marmatite bioleaching.The corresponding metal extraction rate decreases with the increase of pulp density.For the polymetallic sulfide ores,zinc extraction of 97.1% is achieved after bioleaching in shake flasks for 10 d,while only 7.8% is obtained after bioleaching in small-scaled column.Analytical results of scanning electron microscopy(SEM) and energy dispersive X-ray analysis(EDX) reveal that large amount of calcium sulfate is formed on the mineral surface.
文摘The results of investigation of micromineralogy of disseminated-sulphide gold ore deposits of the Yana-Kolyma belt; the investigation was conducted via electron microscopy using a QEMSCAN （Quantitative Evaluation of Minerals by Scanning Electron Microscopy） hardware and software instrument equipped with a Quantax quantitative analysis system. The following micro-mineral phases have been detected： native gold and silver, selenides of Au and Ag （naumanite and fishesserite （？）, hessite, sulfoarsenides of Ni and Co （gersdorffite, cobaltite, rammelsbergite）, molibdenite and platinum group minerals. Our findings in disseminated sulfide ores selenides of Au and Ag, and molybdenite, together with the findings of platinum group minerals and Ni and Co, emphasize the ＂black shale＂ specifics character of these types of deposits.
文摘The presented results are related to the leaching of Pb-Zn-Cu-Fe sulphide concentrate, obtained from barite-sulphide ores, under the elevated temperatures and pressures in an autoclave. The leaching process was performed using the sulphur acid solution with the oxygen addition for the separation of the targeted metals from the polymetallic concentrate. In this process influences of various parameters were discussed and then correlated to the leached metals, zinc, copper and iron. Zinc, copper and iron were dissolved in a solution, while lead remained as insoluble in the leach residue. The best leaching results were determined under the temperature of 210 ℃ during the 240 min. Obtained leaching degrees were 98% zinc, 95% copper and 96% iron.
