期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
锯齿波跳汰机回收粗粒金的实践 被引量:4
1
作者 刘耀青 钟亚飞 《矿冶》 CAS 2002年第B07期127-128,160,共3页
锯齿波跳汰机是在传统跳汰机的基础上改进的新型跳汰设备,应用于磨矿分极回路中可回收粗粒金。元阳金矿中粗粒金占58.03%,在磨矿一分级回路采用锯齿波跳汰机回收,大大提高了金的回收率,使金的回收率达到80%以上。试验中分别考查... 锯齿波跳汰机是在传统跳汰机的基础上改进的新型跳汰设备,应用于磨矿分极回路中可回收粗粒金。元阳金矿中粗粒金占58.03%,在磨矿一分级回路采用锯齿波跳汰机回收,大大提高了金的回收率,使金的回收率达到80%以上。试验中分别考查了人工床层厚度,冲程冲次,筛下补加水等参数对选矿指标的影响,合理的跳汰参数是取得好指标的关键。本文就锯齿波跳汰机回收粗粒金的工业实践进行了论述,并就工业调试情况作了详细的介绍。 展开更多
关键词 锯齿波跳汰机 金选矿石 回收 粗粒金 选矿指标
下载PDF
Effects of Metallic Ions on the Flotation of Spodumene and Beryl 被引量:30
2
作者 WANG Yu-hua YU Fu-shun 《Journal of China University of Mining and Technology》 EI 2007年第1期35-39,共5页
Effects of multivalent metallic cations, such as Ca2+ and Fe3+, on the flotation of spodumene and beryl were studied. The results show that Fe3+ and Ca2+ exhibit efficient activation on the flotation of spodumene and ... Effects of multivalent metallic cations, such as Ca2+ and Fe3+, on the flotation of spodumene and beryl were studied. The results show that Fe3+ and Ca2+ exhibit efficient activation on the flotation of spodumene and beryl. The ac- tivation of Fe3+ happens quite well within a pH range of 6-9 while the concentration of Fe3+ is 35 mg/L. Efficient acti- vation of Ca2+ takes place over at a pH over 11.6 at a concentration of 140 mg/L. The zeta potential of beryl and spo- dumene shifts slightly to positive values when activated by Ca2+, but markedly by Fe3+. New stretching frequencies of 1594.24 cm-1 and 1587.13 cm-1 have been found in the FTIR spectra of the two minerals after their interaction with Fe3+ and the collector. These new stretching frequencies are the asymmetric stretching frequencies of COO-(carboxyl anion), so thecollector may be chemically absorbed on the surface of Fe3+-activated beryl and spodumene. 展开更多
关键词 SPODUMENE BERYL metallic ions ACTIVATION FLOTATION
下载PDF
Improved recovery of a low-grade refractory gold ore using flotation–preoxidation–cyanidation methods 被引量:7
3
作者 Faraz Soltani Hossna Darabi +1 位作者 Rezgar Badri Piroz Zamankhan 《International Journal of Mining Science and Technology》 SCIE EI 2014年第4期537-542,共6页
In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb a... In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb and As, respectively, remained in the final tailings and only about 28% of the total Au remained for further cyanidation processes. On the other hand, in bulk method of flotation the maximum Au recovery of 90.6% achieved after 60 min of flotation at the grind size with K80 of 146 micron. In addition, the bulk flotation method resulted in the concentrate with low concentrations of Sb and As elements. To improve the recovery of low-grade refractory gold ores, flotation should be followed by roasting, biological, or pressure oxidation processes so that the gold could be liberated prior to cyanidation processes. It is also found that the pressure oxidation pre-treatment of the concentrates prior to cyanidation may yield high gold recoveries of over than 83%. In these processes, recoveries are controlled by the temperature and the oxygen partial pressure in the solvent. However, by utilizing the bio-oxidation technique, the oxidation of sulfur to sulfate cannot be completed and, consequently, the gold recovery may be limited to only 72.2%. 展开更多
关键词 Low-grade refractory gold ore Pre-treating Flotation Pre-oxidation
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部