Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Ch...Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Characteristic parameters such as the area and number of spatters, the average grayscale of a spatter image, the entropy of a spatter grayscale image, the coordinate ratio of the plume centroid and the welding point, the polar coordinates of the plume centroid were defined and extracted. Karhunen-Loeve transform method was used to change the seven characteristics into three primary characteristics to reduce the dimensions. Also, K-nearest neighbor method was used to classify the plume and spatter images into two categories such as good and poor welding quality. The results show that plume and spatter have a close relationship with the welding stability, and two categories could be recognized effectively using K-nearest neighbor method based on Karhunen-Loeve transform.展开更多
The extraction behavior of heavy metals from municipal waste incineration (MWI) fly ash was investigated systematically. The extraction process includes two steps, namely, fly ash was firstly washed with water, and ...The extraction behavior of heavy metals from municipal waste incineration (MWI) fly ash was investigated systematically. The extraction process includes two steps, namely, fly ash was firstly washed with water, and then subjected to hydrochloric acid leaching. The main parameters for water washing process were tested, and under the optimal conditions, about 86% Na, 70% K and 12% Ca were removed from fly ash, respectively. Hydrochloric acid was used for the extraction of valuable elements from the water-washed fly ash, and the optimal extraction was achieved for each heavy metal as follows: 86% for Pb, 98% for Zn, 82% for Fe, 96% for Cd, 62% for Cu, 80% for Al, respectively. And the main compositions of the finally obtained solid residue are Ca2PbO4, CaSi2Os, PbsSiO7, Ca3A12Si3012 and SiO2.展开更多
A process design approach for multi-stage stretch forming was proposed by combining the strain distribution method and finite element method(FEM)to determine the minimum stage number and deformation amount of each sta...A process design approach for multi-stage stretch forming was proposed by combining the strain distribution method and finite element method(FEM)to determine the minimum stage number and deformation amount of each stage.The strain distribution method was used to calculate the deformation amount of each stage and evaluate the formability through a safety criterion.FE simulation was taken as an analysis tool to reveal the deformation behaviour,to predict the strain contour and to determine the process parameters at each stage.To evaluate the effect of heat treatment after pre-strain on occurrence of deformation defects during the subsequent deformation,a multi-stage uniaxial tension test for 2B06 aluminium alloy sheet was carried out.A case study demonstrates that the approach has high reliability and good practicability.展开更多
An optimization method was presented for cold stretch forming of titanium-alloy aircraft skin to determine process parameters and to reduce springback.In the optimization model,a mathematical formulation of stress dif...An optimization method was presented for cold stretch forming of titanium-alloy aircraft skin to determine process parameters and to reduce springback.In the optimization model,a mathematical formulation of stress difference was developed as an indicator of the degree of springback instead of implicit springback analysis.Explicit finite element method(FEM)was used to analyze the forming process and to provide the stress distribution for calculating the amount of the stress indicator.In addition,multi-island genetic algorithm(MGA)was employed to seek the optimal loading condition.A case study was performed to demonstrate the potential of the suggested method.The results show that the optimization design of process parameters effectively reduces the amount of springback and improves the part shape accuracy.It provides a guideline for controlling springback in stretch forming of aircraft skin.展开更多
An experiment facility has been set up for the study of metal cluster compounds in our laboratory, which consists of a nano-electrospray ionization source, an ion transmission and focus system, and a reflectron time-o...An experiment facility has been set up for the study of metal cluster compounds in our laboratory, which consists of a nano-electrospray ionization source, an ion transmission and focus system, and a reflectron time-of-fight mass spectrometer. Taking advantage of the nano-electrospray ionization source, polyvalent ions are usually produced in the "ionization" process and the obtained mass resolution of the equipment is over 8000. The molecular ion peaks of metal cluster compounds [Au20(PPhpy2)10Cl2](SbF6)4, where PPhpy2=bis(2- pyridyl)phenylphosphine, and [AuaAg2(C)L6](BF4)4, where L=2-(diphenylphosphino)-5- methylpyridine, are distinguished in the respective mass spectrum, accompanied by some fragment ion peaks. In addition, the mass-to-charge ratios of the parent ions are determi- nated. Preliminary results suggest that the device is a powerful tool for the study of metal cluster compounds. It turns out that the information obtained by the instrumentation serves as an essential supplement to single crystal X-ray diffraction for structure characterization of metal cluster compounds.展开更多
The vitrification characteristics of municipal solid waste incinerator (MSWI) fly ash were investigated. Effects of temperature on the binding efficiency of heavy metals, the change of chemical compositions and the we...The vitrification characteristics of municipal solid waste incinerator (MSWI) fly ash were investigated. Effects of temperature on the binding efficiency of heavy metals, the change of chemical compositions and the weight loss of fly ash in the range of 800-1350 ℃ were studied. Toxicity Characteristic Leaching Procedure (TCLP) of the United States was used to analyze the leaching characteristics of heavy metals in fly ash and molten slag. Results indicate that chemical compositions, the weight loss of fly ash and the binding efficiency of heavy metals in fly ash have a tremendous change in the range of 1150-1260 ℃. The percentage of CaO, SiO2 and Al2O3 increases with the increasing temperature, whereas it is contrary for SO3, K2O, Na2O and Cl; especially when the temperature is 1260 ℃, the percentage of these four elements decreases sharply from 43.72% to 0.71%. The weight loss occurs obviously in the range of 1150-1260 ℃. Heavy metals of Pb and Cd are almost vaporized above 1000 ℃. Cr is not volatile and its binding efficiency can reach 100% below 1000 ℃. Results of TCLP indicate that the heavy metal content of molten slag is beyond stipulated limit values.展开更多
The thermal boundary conductance of Al/SiO2, Al/Si, Au/SiO2, and Au/Si are measured by a femtosecond laser transient thermoreflectance technique. The distinct differences of the interfacial thermal conductance between...The thermal boundary conductance of Al/SiO2, Al/Si, Au/SiO2, and Au/Si are measured by a femtosecond laser transient thermoreflectance technique. The distinct differences of the interfacial thermal conductance between these samples are observed. For the same metal film, the thermal boundary conductance between metal and substrate decreases with the thermal conductivity of the substrate. The measured results are explained with the phonon diffusion mismatch model by introducing a phonon transmission coefficient across the interface.展开更多
基金Project (51175095) supported by the National Natural Science Foundation of ChinaProjects (10251009001000001,9151009001000020) supported by the Natural Science Foundation of Guangdong Province,ChinaProject (20104420110001) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Characteristic parameters such as the area and number of spatters, the average grayscale of a spatter image, the entropy of a spatter grayscale image, the coordinate ratio of the plume centroid and the welding point, the polar coordinates of the plume centroid were defined and extracted. Karhunen-Loeve transform method was used to change the seven characteristics into three primary characteristics to reduce the dimensions. Also, K-nearest neighbor method was used to classify the plume and spatter images into two categories such as good and poor welding quality. The results show that plume and spatter have a close relationship with the welding stability, and two categories could be recognized effectively using K-nearest neighbor method based on Karhunen-Loeve transform.
文摘The extraction behavior of heavy metals from municipal waste incineration (MWI) fly ash was investigated systematically. The extraction process includes two steps, namely, fly ash was firstly washed with water, and then subjected to hydrochloric acid leaching. The main parameters for water washing process were tested, and under the optimal conditions, about 86% Na, 70% K and 12% Ca were removed from fly ash, respectively. Hydrochloric acid was used for the extraction of valuable elements from the water-washed fly ash, and the optimal extraction was achieved for each heavy metal as follows: 86% for Pb, 98% for Zn, 82% for Fe, 96% for Cd, 62% for Cu, 80% for Al, respectively. And the main compositions of the finally obtained solid residue are Ca2PbO4, CaSi2Os, PbsSiO7, Ca3A12Si3012 and SiO2.
基金Project(2006AA04Z143) supported by the National High-tech Research and Development Program of ChinaProject(2006BAF04B00) supported by the National Key Technologies R&D Program of ChinaProject(2007ZE51055) supported by the Aviation Science Foundation of China
文摘A process design approach for multi-stage stretch forming was proposed by combining the strain distribution method and finite element method(FEM)to determine the minimum stage number and deformation amount of each stage.The strain distribution method was used to calculate the deformation amount of each stage and evaluate the formability through a safety criterion.FE simulation was taken as an analysis tool to reveal the deformation behaviour,to predict the strain contour and to determine the process parameters at each stage.To evaluate the effect of heat treatment after pre-strain on occurrence of deformation defects during the subsequent deformation,a multi-stage uniaxial tension test for 2B06 aluminium alloy sheet was carried out.A case study demonstrates that the approach has high reliability and good practicability.
基金Project(50905008)supported by the National Natural Science Foundation of ChinaProject(2007AA041905)supported by the National High-tech Research and Development Program of ChinaProject(YWF-10-01-B08)supported by the Fundamental Research Funds for the Central Universities,China
文摘An optimization method was presented for cold stretch forming of titanium-alloy aircraft skin to determine process parameters and to reduce springback.In the optimization model,a mathematical formulation of stress difference was developed as an indicator of the degree of springback instead of implicit springback analysis.Explicit finite element method(FEM)was used to analyze the forming process and to provide the stress distribution for calculating the amount of the stress indicator.In addition,multi-island genetic algorithm(MGA)was employed to seek the optimal loading condition.A case study was performed to demonstrate the potential of the suggested method.The results show that the optimization design of process parameters effectively reduces the amount of springback and improves the part shape accuracy.It provides a guideline for controlling springback in stretch forming of aircraft skin.
文摘An experiment facility has been set up for the study of metal cluster compounds in our laboratory, which consists of a nano-electrospray ionization source, an ion transmission and focus system, and a reflectron time-of-fight mass spectrometer. Taking advantage of the nano-electrospray ionization source, polyvalent ions are usually produced in the "ionization" process and the obtained mass resolution of the equipment is over 8000. The molecular ion peaks of metal cluster compounds [Au20(PPhpy2)10Cl2](SbF6)4, where PPhpy2=bis(2- pyridyl)phenylphosphine, and [AuaAg2(C)L6](BF4)4, where L=2-(diphenylphosphino)-5- methylpyridine, are distinguished in the respective mass spectrum, accompanied by some fragment ion peaks. In addition, the mass-to-charge ratios of the parent ions are determi- nated. Preliminary results suggest that the device is a powerful tool for the study of metal cluster compounds. It turns out that the information obtained by the instrumentation serves as an essential supplement to single crystal X-ray diffraction for structure characterization of metal cluster compounds.
基金Sponsored by the Chinese Postdoctoral Fund(Grant No.023205030)National Natural Science Foundation of China(Grant No.20577047)
文摘The vitrification characteristics of municipal solid waste incinerator (MSWI) fly ash were investigated. Effects of temperature on the binding efficiency of heavy metals, the change of chemical compositions and the weight loss of fly ash in the range of 800-1350 ℃ were studied. Toxicity Characteristic Leaching Procedure (TCLP) of the United States was used to analyze the leaching characteristics of heavy metals in fly ash and molten slag. Results indicate that chemical compositions, the weight loss of fly ash and the binding efficiency of heavy metals in fly ash have a tremendous change in the range of 1150-1260 ℃. The percentage of CaO, SiO2 and Al2O3 increases with the increasing temperature, whereas it is contrary for SO3, K2O, Na2O and Cl; especially when the temperature is 1260 ℃, the percentage of these four elements decreases sharply from 43.72% to 0.71%. The weight loss occurs obviously in the range of 1150-1260 ℃. Heavy metals of Pb and Cd are almost vaporized above 1000 ℃. Cr is not volatile and its binding efficiency can reach 100% below 1000 ℃. Results of TCLP indicate that the heavy metal content of molten slag is beyond stipulated limit values.
基金supported by the National Basic Research Program of China ("973" Project) (Grant No. 2011CB707605)the National Nature Science Foundation of China (Grant Nos. 50875047, 50776017, 50925519, 51106029)
文摘The thermal boundary conductance of Al/SiO2, Al/Si, Au/SiO2, and Au/Si are measured by a femtosecond laser transient thermoreflectance technique. The distinct differences of the interfacial thermal conductance between these samples are observed. For the same metal film, the thermal boundary conductance between metal and substrate decreases with the thermal conductivity of the substrate. The measured results are explained with the phonon diffusion mismatch model by introducing a phonon transmission coefficient across the interface.