《墨经》光学三条阐微

《墨经》是中国古代最辉煌的科学著作 ,从中选择了三条光学经文 ,详细地进行了研究 ;这三条经文讨论两面平面镜的成像、凹面镜成像与凸面镜成像的规律。研究《墨经》对于科学研究及中国先秦科学史研究都具有相当重要的理论价值与现实意义。

A 5-Gbit/s monolithically-integrated low-power clock recovery circuit in 0.18-μm CMOS

In order to make a 10 Gbit/s 2：1 half-rate multiplexer operate without external clocks, a 5 Gbit/s clock recovery （CR） circuit is needed to extract the desired clock from one input data. For the CR circuit, a 3-stage ring voltage-controlled oscillator （VCO） is employed to avoid an unreliable startup of a 2-stage VCO and a low oscillation frequency of a 4-stage VCO. A phase frequency detector （PFD） is used to expand the pull-in range to meet the wide tuning range of a VCO required by process-voltage-temperature （PVT） variation. SMIC 0. 18-μm CMOS technology is adopted and the core area is 170 μm ×270 μm. Measurements show that, under a 1.8 V supply voltage, it consumes only about 90 mW, and has an input sensitivity of less than 25 mV, an output single-ended swing of above 300 mV, a phase noise of - 114 dBc/Hz at 1 MHz offset and a pull-in range of 1 GHz.

A Novel Method to Compensate the Sigma-Delta Shaped Noise for Wide Band Fractional-N Frequency Synthesizers

A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum reduction of the phase noise by about 16dB can be achieved. Compared to other compensation methods,the technique proposed here is relatively simple and easy to implement. Key building blocks for realizing the noise cancellation,including the delay variable PFD and compensation current source, are specially designed. Both the behavior level and circuit level simulation results are presented.

Quarantine Identification of Dendroctonus punctatus

Dendroctonus spp. is one of the most portable pests in imported and ex- ported timber and wooden packages, and it is an important object of the port quarantine. Making rapid and accurate identification of Dendroctonus spp. is an im- portant method to reduce the invasion risk of Dendroctonus spp. for China. In this paper, Dendroctonus punctatus, which belongs to the Dendroctonus spp., is intro- duced in detail from the aspects of taxonomic status, biological characteristics, mor- phological characteristics and the invasion risk, providing reference for the identifica- tion of Dendroctonus punctatus in inspection and quarantine.

Inheritance of 15 microsatellites in the Pacific oyster Crassostrea gigas:segregation and null allele identification for linkage analysis

Microsatellites were screened in a backcross family of the Pacific oyster, Crassostrea gigas. Fifteen microsatellite loci were distinguishable and polymorphic with 6 types of allele-combinations. Null alleles were detected in 46.7% of loci, accounting for 11.7% of the total alleles. Four loci did not segregate in Mendelian Ratios. Three linkage groups were identified among 7 of the 15 segregating loci. Fluorescence-based automated capillary electrophoresis (ABI 310 Genetic Analyzer) that used to detect the microsatellite loci, has been proved a fast, precise, and reliable method in microsatellite genotyping.

Identification of Ice Elevation Change of the Shuiguan River No.4 Glacier in the Qilian Mountains,China

GPS measurement,an effective method for surveying glacier surface topography,has been applied in some glaciers for many years.The Shuiguan River No.4 glacier,a small glacier with its area of 1.84 km2 in 1972,located in the east of the Qilian Mountains,China,was selected to study its ice elevation change using GPS measurement in 2007.This study was conducted on the ablation area with GPS-measured area 0.5 km2.The ice elevation change of the glacier was obtained by comparing the DEM obtained by a 1:50 000 topographic map made in 1972 with the DEM by GPS-measured data acquired in 2007.The differences of the two DEMs showed the thinning condition of the glacier was apparent.The mean thinning was 15±8 m with the mean thinning rate of 0.42±0.22 m a-1 for 1972-2007 in the measurement area,which equaled 0.38±0.20 m yr-1 in water equivalent(w.e.).The prominent thinning occurred on the south part of the glacier,which was the area near the glacier terminus with the maximum thinning of 41±8 m.Assuming the thinning value of 15±8 m for the glacier area below 4640 m a.s.l.,the wasting ice mass was calculated to be 6.4±3.2×10-3 km3 for 1972-2007,corresponding to 5.7±2.8×10-3 km3 w.e.,which meant that the montane runoff released by the glacier was at least 5.7±2.8×106 m3 between 1972-2007.

Application of Stable Isotope Tracing Technologies in Identification of Transformation among Waters in Sanjiang Plain,Northeast China

In order to investigate the transformation among the precipitation,groundwater,and surface water in the Sanjiang Plain,Northeast China,precipitation and groundwater samples which were collected at the meteorological station of the Sanjiang Mire Wetland Experimental Station,Chinese Academy of Sciences and the surface water which collected from the Wolulan River were used to identify the transformation of three types of water.The isotope composition of different kinds of water sources were analyzed via stable isotope(deuterium and oxygen-18) investigation of natural water.The results show a clear seasonal difference in the stable isotopes in precipitation.During the cold half-year,the mean stable isotope in precipitation in the Sanjiang Plain reaches its minimum with the minimum temperature.The δ18O and δD values are high in the rainy season.In the Wolulan River,the evaporation is the highest in August and September.The volume of evaporation and the replenishment to the river is mostly same.The groundwater is recharged more by the direct infiltration of precipitation than by the river flow.The results of this study indicate that the water bodies in the Sanjiang Plain have close hydrologic relationships,and that the transformation among each water system frequently occurs.

Identification of the Epitopes of Monoclonal Antibodies against P74 of Helicoverpa armigera Nucleopolyhedrovirus

P74 is a per os infectivity factor of baculovirus.Here,we report the production of three monoclonal antibodies (mAbs),denoted as 20D9,20F9 and 21E1,raised against P74 of Helicoverpa armigera nucleopolyhedrovirus (HearNPV),and the identification of their recognition epitopes.The full-length P74,without the transmembrane domains at the C-terminus,was first divided into three segments (N,M and C,respectively),based on the proposed cleavage model for the protein,which were then expressed individually.Western blot analyses revealed specific cross-reactions with the N fragment,for both 20D9 and 21E1.Extensive truncation,followed by prokaryotic expression,of the P74 N fragment was then performed in order to screen for linear epitopes of P74.The recognition regions of 20D9 and 21E1 were revealed to be localized at R144-T153 and T199-C219,respectively.In addition,immunofluorescence microscopy indicated that 20D9 and 20F9 could recognize native P74 in HearNPV-infected cells.These findings will facilitate further investigations of the proteolytic processing of HearNPV P74,and of its involvement in virus-host interactions.

Isolation and characterization of 45 polymorphic microsatellite loci of turbot(Scophthalmus maximus)and cross-species amplification

Turbot （Scophthalmus maximus） is a flatfish species commercially important for aquaculture. In this study, we generated a microsatellite-enriched genomic DNA library for Scophthalmus rnaxirnus, and then isolated and characterized 45 microsateIIite loci by genotyping 30 individuals. The observed number of alleles ranged from 2 to 19 with an average of 6.24, while the effective number of alleles ranged from 1.30 to 11.11 with an average of 3.66. The expected heterozygosities varied from 0.235 to 0.9254 and polymorphic information content ranged from 0.204 4 to 0.903 3, with an average of 0.622. Twelve loci deviated significantly from Hardy-Weinberg equilibrium, and no significant linkage disequilibrium was observed between any pair of loci after Bonferroni correction. In cross-species amplification, five flatfish species （Paralichthys lethostigma, Verasper rnoseri, platichthys stellatus, Hippoglossoides dubius and Cynoglossus semilaevis） showed at least one polymorphic locus. These polymorphic microsatellite loci should prove useful for population analysis of turbot and other related species.

Identification of Quantitative Trait Loci （QTLs） Determining Flowering in the Robusta Coffee （Coffea canephora Pierre）

The quantitative trait loci （QTLs） analysis for flower traits were performed based on three crossing of Coffea canephora in Indonesia. This study successfully identified 19 QTLs related to flowering. These QTLs consisted of 1） three QTLs associated with green candle flowering time located at linkage groups of A and D; 2） one QTL associated to white candle flowering time located at linkage groups of B; 3） two QTLs associated to blossom flowering time located at linkage groups of B; 4） two QTLs associated to number of flowers located at linkage groups of G and H; 5） five QTLs associated to score of flowers quality located at linkage groups of A, C and D; 6） five QTLs associated to number of star flowers located at linkage groups of D, E, F and G. Due to some QTLs are overlapping on the same linkage group, thus, these 19 QTLs for flower traits might be considered as 15 different ones which distributed on 14 regions of the eight linkage groups. Although pleiotropic genes might be the most likely explanation for the collocation of these QTLs, the present data are not sufficient to distinguish between a pleiotropic gene and a cluster of different loci controlling several traits. These results can be a first step for molecular breeding on Robusta coffee mainly in order to improve potential suitable characteristics such as number of flowers and number of normal flowers as well as to reduce adverse characteristics such as number of star flowers.

Identification of K-Casein Polymorphism in Bali Cattle

The present study was conducted to identify K-casein （Kappa-casein） polymorphism in the Bali cattle （Bos sondaicus）. A 780 bp specific fragment of K-casein gene spanning from the forth exon region （517 bp） to forth intron （263 bp） was amplified from 60 individuals from the Bali Cattle Breeding Centre in Jembrana regency, Bali province. PCR-RFLP analysis with HindlII indicated that only the BB genotype was found at locus I, while with PstI indicated that two genotypes AA and AB were found at the k-casein locus If. The frequencies of A and B alleles at locus II were 0.91 and 0.09, respectively. Mutations in locus II did not change the amino acid coding （silent mutation）. At locus I, comparison with allele frequencies in other cattle breeds indicates that frequencies in Bali cattle （Bos sondaicus） are significantly different from those observed in Bos taurus and Bos indicus breeds.

An Integrated Approach to Oscillation Propagation Identification and Source Locating in Process Multi-loop Systems

An integrated method for identifying the propagation of multi-loop process oscillations and their source location is proposed in this paper. Oscillatory process loop variables are automatically selected based on the component-related ratio index and a mixing matrix, both of which are obtained in data preprocessing by spectral independent component analysis. The complex causality among oscillatory process variables is then revealed by Granger causality test and is visualized in the form of causality diagram. The simplification of causal connectivity in the diagram is performed according to the understanding of process knowledge and the final simplest causality diagram, which represents the main oscillation propagation paths, is achieved by the automated cutting-off thresh-old search, with which less significant causality pathways are filtered out. The source of the oscillation disturbance can be identified intuitively through the final causality diagram. Both simulated and real plant data tests are presented to demonstrate the effectiveness and feasibility of the proposed method.

Drought Tolerant Criterion of Wheat Genotypes Using Carbon Isotopes Discrimination Technique

Drought tolerant analysis using carbon isotopes discrimination could be useful tool to decide a genotype with high adaptation to drought. A pot culture experiment was conducted in glass house at the IAEA （International Atomic Energy Agency） laboratories, Seibersdorf, Austria to analyze drought tolerant of wheat genotype using carbon isotopes discrimination technique. Four wheat genotypes viz., LU-26s, Bhittai, Roshan, Taifu, were tested. There were two treatments： Control （normal irrigation） and Drought （@ 30% field capacity of the control treatment）. Drought treatment was imposed after two weeks of germination. The experiment was continued up to 10 weeks after germination and was terminated at flowering stage. The data were recorded in terms of plant height, number of tillers, shoot dry weight and carbon isotopic ratio （δ）. Results showed that genotype LU-26s was found to have best performance under drought condition, with minimum decrease in the growth parameters i.e., plant height, number of tillers and shoot dry weight. High CID （carbon isotopes discrimination） values were also observed in genotype LU-26s, showing close positive correlation between SDW （shoot dry weight） and CID. It is therefore concluded that carbon isotopes discrimination can be an important criterion for the selection of wheat genotypes for drought prone areas.

Identification of four SNPs and association analysis with meat quality traits in the porcine Pitx2c gene

The association of the porcine Pitx2c gene with meat quality traits was investigated in the present study. A total of eight single nucleotide polymorphisms （SNPs） were found. Allele frequencies of four SNPs were further detected in four commercial breeds and eight Chinese indigenous breeds. Single SNP and meat quality associations were analyzed in a YorkshirexMeishan F2 population. The SNPs c.474C〉T （P〈0.01） and c.636C〉T （P〈0.05） showed a significant association with meat color （MCV1）. The SNPs c,＊37G〉A and c.＊47G〉A were significantly associated with drip loss rate （DLR）, water holding capacity （WHC） and meat color value （MCV1） consistently （P〈0.05）. Linkage disequilibrium （LD） analysis revealed that the adjacent SNPs were in LD. Two major haplotypes were identified, and association analysis between haplotype combinations and meat quality indicated that the presence of two copies of haplotype 1 -CCGG- may improve meat quality.

Identification of QTLs for yield and yield components of barley under different growth conditions

Waterlogging is a major abiotic stress limiting barley (Hordeum vulgare L.) yield and its stability in areas with excessive rainfall.Identification of genomic regions influencing the response of yield and its components to waterlogging stress will enhance our understanding of the genetics of waterlogging tolerance and the development of more tolerant barley cultivars.Quantitative trait loci (QTLs) for grain yield and its components were identified using 156 doubled haploid (DH) lines derived from a cross between the cultivars Yerong (waterlogging-tolerant) and Franklin (waterlogging-sensitive) grown under different conditions (waterlogged and well drained).A total of 31 QTLs were identified for the measured characters from two experiments with two growth environments.The phenotypic variation explained by individual QTLs ranged from 4.74% to 55.34%.Several major QTLs determining kernel weight (KW),grains per spike (GS),spikes per plant (SP),spike length (SL) and grain yield (GY) were detected on the same region of chromosome 2H,indicating close linkage or pleiotropy of the gene(s) controlling these traits.Some different QTLs were identified under waterlogging conditions,and thus different markers may have to be used in selecting cultivars suitable for high rainfall areas.

Application of Brillouin Optical Correlation Domain Analysis for Crack Identification in Concrete Structure

This paper investigates the application of distributed optical fiber strain sensors to civil engineering structures, because no other tool can satisfactorily detect the location of the unpredictable phenomenon. In fact, the locations of cracks in the concrete structure are unknown a priori; therefore, a fully distributed sensor is necessary to detect them. The Brillouin optical correlation domain analysis （BOCDA）, which offers high spatial resolution by using stimulated Brillouin scattering along the whole length of the optical fiber, is used in a wide range of civil engineering applications, and the same has undergone significant development over the last decade. In this paper, it is demonstrated how a BOCDA-based strain sensor can be employed to monitor cracks in concrete. Crack monitoring on the surface of the concrete member provides useful information for evaluating stiffness and durability of the structure, particularly for early detection of tiny cracks, which is essential for preventing crack growth and dispersion. The crack-induced strain distribution was analytically investigated, and it was proved that BOCDA can identify even a small crack before its visual recognition by a beam test. Moreover, periodical crack monitoring was successfully executed on a pedestrian deck for five years.